The Z in ZR corresponds to an old label used by manufacturers to indicate that the speed index is higher than V, i.e. 150 mph. Thus, a ZR tyre has a speed index of V, W, or Y. R indicates that the structure is RADIAL. … There is therefore no difference between a ZR or an R tyre with the same speed index.
Table of Contents
READ ALSO
Likewise, Can I mix V and W rated Tyres?
You can invalidate your car insurance by fitting new tyres that have a lower speed rating than the manufacturer’s original fit. … Mixing tyre speed ratings isn’t recommended.
Also, What are R rated tires?
R speed rating
Speed rating R allows for speeds up to 106 mph (170 km/h) under optimal conditions. Like Q speed rated tires, R rated tires generally prioritize a particular function or unique performance over maximum speed capability.
Moreover, What does ZR stand for?
| Acronym | Definition |
|---|---|
| ZR | Zirconium |
| ZR | Zone Rating (baseball statistic; used to measure fielding ability) |
| ZR | Zettai Ryouiki (anime) |
| ZR | Freezing Rain (Weather Symbol) |
Do I need ZR tires?
For tires with a maximum speed capability higher than 240 km/h (149 mph), a “ZR” may appear in the size designation. Tires with a maximum speed capability higher than 300 km/h (186 mph), require a “ZR” in the size designation. Consult the tire manufacturer for maximum speed when there is no service description.
Is it OK to fit tyres with a higher load rating?
The higher the load rating number, the stronger the tyre. Tyres with a higher load rating can take a greater amount of air pressure, which means they can also carry heavier loads. … It’s illegal to install tyres that have a lower load index than the vehicle manufacturer’s original tyre fitment.
Can I mix tyre speed rating?
If you are going to mix speed ratings, which we don’t recommend, make sure the lower rated tyres are on the front axle, regardless of whether your vehicle is front-, rear- or four-wheel drive. … We would always recommend that the same size and type of tyre, with the same speed ratings, are fitted on all tyres.
Can you have different tyres on front and back?
Can you have different size tyres front and back? Generally, in a front or rear-wheel drive, as long as you have ensured both pairs of tyres are the same, you can have different size tyres between rear and front if the suspension geometry is set to accommodate for this.
What does 70 mean on a tire?
If a tire has an aspect ratio of 70, it means the tire’s height is 70% of its width. Lower aspect ratio tires, such as a 60 series, generally offer vehicle handling performance advantages over higher aspect ratio tires, such as a 75 series, but a typical trade off can be ride harshness. Construction.
Can I use 235 tires instead of 225?
Are 225 and 235 Tires Interchangeable? Yes, they are. However, this is only possible if your car’s rims can accept the larger millimeter.
What does 75 mean on a tire?
LOAD INDEX
| LOAD INDEX | LOAD (lbs) |
|---|---|
| 72 | 783 |
| 73 | 805 |
| 74 | 827 |
| 75 | 853 |
What is the difference between ZR 17 and r17?
can a zr17 tire fit on an r17 rim? … ZR basically means the tire is adapted for speeds above 149mph. ZR tires includes the speed ratings V(149mph), W(168mph) and Y(186mph). The R stands for radial.
What speed rating is Zr?
For tires having a maximum speed capability above 240 km/h (149 mph), a “ZR” may appear in the size designation. For tires having a maximum speed capability above 300 km/h (186 mph), a “ZR” must appear in the size designation. Consult the tire manufacturer for maximum speed when there is no service description.
What is S speed rating on tires?
R — Up to 106 mph. S — Up to 112 mph. T — Up to 118 mph. H — Up to 130 mph. V — Up to 149 mph.
Can you put different width tires on the same rim?
Simply put, the larger your tire, the more of a grip your vehicle has on the road. … For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size.
What does 91W mean on a tire?
Exotic Sports Cars. While a Z-speed rating still often appears in the tire size designation of these tires, such as 225/50ZR16 91W, the Z in the size signifies a maximum speed capability in excess of 149 mph, 240 km/h; the W in the service description indicates the tire’s 168 mph, 270 km/h maximum speed.
Is a higher load rating better?
The higher the number, the higher the load it can safely handle. As an example, a tire with a load index of 89 can safely handle 1,279 pounds — while a tire with a load rating of 100 can safely handle as much as 1,764 pounds.
What happens if you have too much weight in your car?
Carrying too much weight will put strain on the engine and bring down your fuel economy. Automakers typically include the weight limit in at least two places. It’s listed in the owner’s manual, as well as on a sticker inside the door on the driver’s side. The maximum weight might be lower than you think.
How do you calculate tyre load rating?
You’ll find the load rating of your tyre on the sidewall, just to the right of the diameter. For example, a tyre with a load index of 91 can carry 615kg of weight. Load ratings and speed ratings should be looked at together when you buy a new tyre. Also remember to check your manufacturer’s recommendations.
Should all 4 tyres be the same?
Primarily, you should avoid mixing different tyre brands and different tread patterns. … For optimal safety and performance, we recommend fitting the same tyres to every wheel position on your car, so you should have the same brand, size, tread pattern, load index and speed rating on the front and rear tyres.
Can I mix tyre brands?
Mixing Different Tyre Brands and Tread Patterns
It is illegal to mix cross-ply and radial-ply tyres in the UK. … Mixing different tread depths is generally okay, but it is recommended that newer tyres are installed at the rear axle, as it gives the driver greater control over the braking and steering of the car.
Should New tyres go on front or back?
Regardless of the drive type, we recommend not fitting the better tyres at the front, but always fitting them at the back. The reason is simple: The rear axle ensures the tracking stability of a vehicle.
Should New tyres go on the front or back?
According to Tire Review, new tires should always go in the back. … Although new front tires will spread water and maintain traction, worn tires in the back will hydroplane and may cause the vehicle to spin out, says Tire Review. This is the same for vehicles with rear-, front- or all-wheel drive.
Should I fit new tyres on front or back?
Regardless of the drive type, we recommend not fitting the better tyres at the front, but always fitting them at the back. The reason is simple: The rear axle ensures the tracking stability of a vehicle.
Can you have 2 different brands of tires on your car?
Primarily, you should avoid mixing different tire brands and different tread patterns. There are rare exceptions for approved mixed-tire fittings, but in general, manufacturers do not recommend tire mixing at all.
