The check filter warning light is reminder to clean the dryer’s lint filter each time the dryer is used. The filter is a shallow screen basket located in the lower section of the door opening. The filter lifts out in a straight upward pull.
Likewise, What does CL mean on LG dryer?
CL (Child / Control Lock)
A CL code or CHILD/CONTROL LOCK reading on the dryer’s display is not actually an error code, but rather an indication that the Child/Control Lock feature is active. For most models, press and hold the key labeled CHILD LOCK (secondary function) for 3 seconds to disable the Child Lock feature.
Also, What does it mean when your LG dryer says check filter?
This error means that the lint filter has not been appropriately inserted into the machine. To solve it, simply reinsert the lint filter properly, without protrusion, and the error message should go away.
Moreover, How do I fix the NP error on my LG dryer?
If the tE1 error code is showing on the dryer’s display:
- Unplug the dryer, or trip the circuit breaker supplying power to the dryer.
- While the dryer remains without power, press and hold the START/PAUSE button for 5 seconds.
- Restore power to the dryer and attempt to run another cycle.
How do I run a diagnostic on my LG dryer?
To run the Smart ThinQ feature:
- Open the Smart ThinQ App in your phone.
- Press the POWER to turn on the dryer.
- Place the mouthpiece of your phone very close to the POWER button.
- Press and hold the TEMP. …
- Keep the phone in place until the tone transmission has finished.
How do I reset the CL code on my LG washer?
To TURN OFF CHILD LOCK on your LG washer, press and hold the CHILD LOCK button for 3 to 5 seconds. The washer should now have CHILD LOCK mode DISABLED and all buttons will function properly.
How do I check the flow cycle on my LG dryer?
Press and hold the Temperature Control and Signal button simultaneously, and then press the Power button. Once the display shows In5, press the Start/Pause button. The dryer will start the test which will run for approximately 2 to 3 minutes.
How do I clean the filter on my LG dryer?
How do you clean the filter on a LG dryer?
- Open a door to find the lint filter at the bottom. Take the filter out and check.
- If you press Start/Pause to start drying, Clean Filter will disappear.
- For an electric dryer, Clean Filter may flash while running. Please clean the lint filter.
Why do I have to keep resetting my LG dryer?
Re: LG gas dryer: constantly tripping the manual-reset thermostat. Typically caused from vent blockage, clean venting and blower lint filter housing. If it persists replaced high limit and the other thermostat located on the canister.
How does LG Smart Diagnostics work?
The signal from your smart range is transmitted over your home wireless network and our servers analyze the signal to diagnose any issues and then relay that information to your smart phone app. To use the Wi-Fi diagnosis, open up the LG smart range app and then open the smart diagnosis feature.
How do I troubleshoot my LG dryer?
How to Troubleshoot a LG Dryer
- Inspect the dryer vent to ensure it is clear of lint and debris. …
- Check the LG dryer power breaker at the lighting panel, when your unit will not start. …
- Inspect the inside face of the door, and remove any lint buildup around the door’s seal that may prevent it from closing completely.
Are there any recalls on LG washers?
Incidents/Injuries: LG has received at least 343 reports of washing machines vibrating excessively, of which at least 187 involved minor property damage. … Consumers who have observed their recalled washing machine shaking excessively should immediately stop using it.
How do I reset my LG washer and dryer?
How do I reset my LG washer dryer combo?
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
Is there a reset button on my LG washer?
How to reset the washing machine: Press POWER to turn the washer off. Unplug the washer from the power outlet or turn the circuit breaker to the unit off. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
How dO I run a diagnostic on my LG dryer?
To run the Smart ThinQ feature:
- Open the Smart ThinQ App in your phone.
- Press the POWER to turn on the dryer.
- Place the mouthpiece of your phone very close to the POWER button.
- Press and hold the TEMP. …
- Keep the phone in place until the tone transmission has finished.
How do you reset the flow cycle on a LG dryer?
How do I reset my LG dryer?
- Power the dryer OFF and unplug it from the electrical outlet (You can also trip the circuit breaker if that’s easier).
- Press and hold the START/PAUSE key for 5 seconds while the unit is without power.
- Turn the breaker back on, and power on the unit.
How do I know if my dryer vent is clogged?
How To Tell If Dryer Vent Is Clogged
- Excess Dry Times. One of the first signs that your dryer vent is clogged is when your clothes are no longer fully drying during a regular dry cycle. …
- Burning Smell. Have you noticed a burnt odor coming from your dryer whenever you have a load going? …
- Hot Exterior. …
- Sizable Lint.
How dO you tell if your dryer vent is clogged?
How To Tell If Dryer Vent Is Clogged
- Excess Dry Times. One of the first signs that your dryer vent is clogged is when your clothes are no longer fully drying during a regular dry cycle. …
- Burning Smell. Have you noticed a burnt odor coming from your dryer whenever you have a load going? …
- Hot Exterior. …
- Sizable Lint.
Can I clean dryer vent myself?
Cleaning a dryer duct isn’t difficult. Remove lint from the duct by hand and then vacuum the inside of the duct. Use hose extensions, if available, to vacuum out as much of the duct as you can. Go outside the house and remove the exterior vent cover.
Are there any recalls on LG dryers?
The U.S. Consumer Product Safety Commission today announced a voluntary recall of 21,000 LG Electronics and Kenmore Elite gas dryers. A faulty gas valve can fail to shut off properly, continuing to heat the dryer and its contents after the drying cycle is complete.
How do I reset the thermostat on my LG dryer?
You can reset the machine by unplugging the dryer or tripping the dryer’s circuit breaker. While the dryer is without power, hold the Start/Pause button for five seconds to reset. Then, restore power to the appliance and check to see if the code has persisted. If it has, LG recommends a repair service.
Why does my LG dryer stops before clothes are dry?
The first thing to check for an LG dryer not drying properly is the lint screen. Your dryer was designed to have the lint filter cleaned after every cycle. … Wipe away all lint and debris you find in the filter, then reinstall it. This should help maintain proper airflow and help to trap as much loose lint as possible.
What does LG Smart ThinQ do?
We do know that Thinq features smart grid, access, diagnosis, adapt, and food management capabilities. … Smart Access allows homeowners to control and monitor appliances from outside of the home and, better yet, control LG’s HOM-BOT robotic vacuum cleaner to clean or remotely view the house and even feed the dog.
Does my LG washer have WIFI?
the Wi-Fi button on the Washer for 3 seconds until the wi-fi LED light starts to blink. network and completely register your Washer. Once finished, your product will be listed on the main dashboard.