Locate your water filter cover in the upper right-hand corner inside your refrigerator or in the base grille. Lift the filter door up. Pull the filter out and discard it. Open your new filter and remove the protective coverings from the O-rings.
Likewise, Can filter stop ice maker from working?
A clogged or incorrectly installed water filter can reduce the water flow to the ice maker and dispenser and could cause one or more of the following: Odd tasting ice or water. … Ice maker not producing any ice. Measure fill not working correctly.
Also, How do you reset the ice maker on a Whirlpool refrigerator?
Press the on/off Switch
- Remove the ice tray and cover plate (or just the ice tray). …
- Turn the switch from on to off.
- Unplug the ice maker at the mains.
- Wait 10 minutes.
- Plug the ice maker in again.
- Turn the switch from off to on.
- Replace the ice tray and the cover plate as necessary.
Moreover, What causes a ice maker to stop working?
Cause: A common cause for a clog is frozen water in the line. … Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).
Why is my Whirlpool ice maker not working?
In other instances, your a Whirlpool ice maker not making ice may be due to insufficient water supply. A clogged water filter, kinked water line hose, or defective water inlet valve can restrict the water flowing to an ice maker. … Schedule a professional repair to replace a defective water inlet valve.
What goes wrong with an ice maker?
If your ice maker isn’t producing ice at all or is producing crescents or cubes that are smaller than usual, it’s typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
How do I know if my water filter is clogged?
8 Signs Your Refrigerator Water Filter Needs Replacing (& How to…
- 1) Dispensed Water Tastes Bad. …
- 2 Ice has an Odd Smell. …
- 3) Slow Trickle of Dispensed Water. …
- 4) Ice is Coming Out Small. …
- 5) Black Specks in Water or Ice. …
- 6) Water Filter Light Turns On. …
- 7) Murky Appearance of Water or Ice. …
- 8) It’s Been More than a Year.
Does water for ice maker go through filter?
Yes, the water to the icemaker goes through the water filter first. … From the filter, it comes back to the second valve, which directs the water flow to the dispenser and icemaker.
How do I force my ice maker to cycle?
How to Force an Ice Maker to Cycle
- Open the freezer door to remove the ice bin from below the ice maker.
- Empty the ice from the bin. …
- Press the ice maker toggle switch to the “On” setting if it is not already activated.
- Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.
Where is the reset button on my ice maker?
The test switch, also referred to as the reset button, is located, in the front of the ice maker, underneath the Ice Tray Motor Housing, past the front cover. Press and hold the button until you hear the Ice Tray Motor begin to torque, then release.
How do you troubleshoot an ice maker?
Ice Maker Troubleshooting Guide
- Check the shutoff arm.
- Check the supply valve.
- Inspect the water supply line.
- Test the shutoff switch.
- Check the freezer temperature.
- Inspect the ejector gear.
- Test the ejector motor.
- Test the ice mold heater.
How do I unfreeze my ice maker water line?
A more convenient option is to use a hairdryer to quickly thaw the lines. Confirm first that your ice maker is not malfunctioning. Pour about 1/2 cup of water into the ice maker’s water reservoir. Wait two hours so that the water has time to freeze and dispense the ice.
Why does my Whirlpool ice maker freeze up?
A refrigerator ice maker that freezes up can be caused by a frozen ice maker fill tube, faulty water inlet valve, too low freezer temperature setting, or a water filter that needs replacing.
Why is my Whirlpool refrigerator ice maker not working?
In other instances, your a Whirlpool ice maker not making ice may be due to insufficient water supply. A clogged water filter, kinked water line hose, or defective water inlet valve can restrict the water flowing to an ice maker. When this happens, ice production will be limited or completely stop.
What happens if you don’t change your refrigerator water filter?
Failing to change your fridge’s water filter can cause scaling and deposit buildup in the water and ice machine, which can seriously damage your fridge. This buildup tends to slow down the system, causing low flow, and negatively affects the flavor of your water.
How do you unclog a refrigerator water filter?
Submerge it in a warm water bath with a gentle cleansing solution added. Dish soap or water and vinegar mixture work, or you can buy solvents specifically for cleaning water filters. Let the filter soak for 10 – 30 minutes, depending on how soiled it is.
How do I test my water filter?
The most effective way to determine if your water filter is working properly is to test your water before and after it passes through your filter. Such analysis is called performance testing because it tests the effectiveness of your filter in reducing or removing potentially harmful contaminants that pass through.
Where is the filter on a ice maker?
The water filter compartment is located in the right-hand side of the ice maker controls. Push in on the door to release the latch, and then lower the door.
How often should I change my ice maker filter?
It is recommended by most experts and refrigerator manufacturers that you change your refrigerator’s water filter at least every six months. Six months is an average but can vary widely based on factors such as usage and flow rate expectancy.
Is it bad to not change water filter?
In general, not changing your water filter when it is time means that your water filter will stop working at optimum capacity, and eventually might stop doing its job altogether. In other words, it will stop your water treatment system from doing what it is designed to do.
How do I force my Whirlpool ice maker to cycle?
Look at the center of the Whirlpool icemaker to find the rotating arm that pushes the ice cubes out. Grab the plastic teeth on the arm, and gently pull them in a clockwise direction. You will hear a slight winding sound. The icemaker should start into its cycle.
Why is my ice maker taking so long to make ice?
The top reasons for a slow ice maker inside of a freezer are incorrect temperature setting, too much or too little food inside, and a clogged water line or filter. If your ice maker is slow at making ice, try the solutions below. … Appliance® are standing by to repair your ice maker.
How do I reset my ice maker?
Unplug the refrigerator for 30 seconds; then plug it back in. Within 15 seconds of restoring power, press the feeler arm three times in succession. This should force the ice maker to run water into the reservoir and begin the cycle of ice production.
Why wont my ice maker fill with water?
Water may not be reaching the ice maker due to a frozen line, missing filter, or a closed supply valve. … When there is no filter, or it is clogged, the ice maker does not get water. Make sure that the filter is in place, and if it has not been changed in more than six months, replace it with a new one.