- Locate the reset button. The router reset button is located on the back of the router. …
- Press and hold the reset button. Using a paper clip or pen, gently depress the reset button and hold it until the lights on the front of the modem turn off. …
- Wait for the router to reinitialize.
similarly, How do I refresh my Comcast cable box?
1 Perform an Xfinity System Refresh
- Press the A button on your remote control.
- Select the System Refresh tile, and press OK on your remote.
- Select Refresh Now, and press OK on your remote.
on the other hand, How do I know if Comcast is down?
Outage Text Message Alerts
- Sign in to My Account.
- Click the Services tab at the top of the page.
- Click the Status Center link.
- If you’re experiencing an outage, a banner will be displayed on the top of the Status Center and Outage Map pages.
- Click Text me when its resolved.
also, How do I reboot my modem? To reboot a modem:
- Unplug the power and Ethernet cables from the modem. …
- Wait 2-3 minutes for the modem to fully power off. …
- Reconnect the power and Ethernet cables to the modem.
- Wait for the Internet light to turn solid, then check if the internet is working properly.
How do I refresh my cable box?
Unplug your receiver. Wait at least 60 seconds before plugging it back in. Using your remote, turn off your receiver and wait 60 seconds before turning it back on. Or you can refresh your equipment online.
Why isn’t my cable box connecting to my TV?
First, turn off the power on the TV and unplug it. Then pull out the HDMI cable from either the box or the TV (doesn’t matter which). Plug the TV back in and turn it back on. Finally, plug the HDMI back into HDMI 1 and make sure the TV is on the HDMI 1 input channel.
Why is my Comcast not working?
Unplug your equipment, wait one minute, and then plug it back in. This method, known as powercycling or rebooting, can fix many connection problems. Make sure your account is up to date on payments by going to the Billing tab in My Account (you may be asked to sign in using your Xfinity ID and password first).
Why is Xfinity Wifi so bad?
Xfinity is a cable internet network, which means it can slow down when too many users get online at the same time. This is because the network can’t support the amount of data people are using all at once, so things get backed up like a traffic jam.
Why isn’t my Xfinity Wifi showing up?
Xfinity Internet
If you’re connected properly, manually restarting your modem will often restore Internet connectivity – the easiest way to do this is by simply unplugging your cable modem for two minutes. Once the cable modem is plugged back in, wait for it to restore connectivity (up to five minutes).
How do I reboot my Comcast router?
There are two ways to restart your Wireless Gateway:
- Open the My Account app and tap the Internet icon. For Android devices, tap the menu icon in the upper-left corner of the screen, then tap Internet.
- Tap the Wireless Gateway.
- Select “Restart this Device.”
- Tap “Restart Device” to confirm.
How do I get my modem back online?
Unable to Access Internet – Top Five Steps To Get Back Online Now
- Call your Internet Service Provider (ISP). The first step is to rule out any area-wide problems with your ISP. …
- Reboot your network bridge. Find your cable/DSL modem or T-1 router and power it down. …
- Ping your router. Try to ping your router’s IP address.
How do I reboot my modem and WiFi?
Steps to Reboot a Router and Modem
- Unplug the router and the modem. …
- Wait at least 30 seconds. …
- Plug in the modem. …
- Wait at least 60 seconds. …
- Plug in the router. …
- Wait at least 2 minutes. …
- When the router and modem restart, test to see if the problem went away.
What happens if I press the reset button on my modem?
A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.
How do I know if my cable box is bad?
If you are having trouble with your television’s cable box, there can be a variety of troubling symptoms, including anything from static to no picture whatsoever. The image might be frozen, the channel might not change or playback features might not work.
Why does my TV say no signal when HDMI is plugged in?
Verify that the source device has power and is turned on. If the source device is connected with an HDMI® cable: Make sure the TV and source device are both turned on, then disconnect the HDMI cable from one of the devices and then connect it again. … Try a new or another known working HDMI cable.
Why is my TV suddenly saying no signal?
First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.
What does no signal mean on cable TV?
A “No Signal”, “No Source“, or “No Input” message will appear on your TV screen if the TV is not receiving a signal from your TV box. This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input.
How do I test my cable signal?
To test your coax cable signal strength for the internet, you can use a digital signal meter or a multimeter. Otherwise, you can check the cable signal strength on the modem. A multimeter will let you know if your cable is live and is functioning well, while a digital signal meter will give the level of deterioration.
How do I troubleshoot my Comcast cable box?
Restart from the Xfinity My Account App
- Open the Xfinity My Account app (available for iOS and Android.)
- Scroll down and select the TV tile.
- Select Troubleshoot.
- You will be presented with two options: …
- Select your preferred method and press Start Troubleshooting.
Why can’t I activate my Xfinity Internet?
If you’re not prompted to activate after signing into the Xfinity app, you can navigate to the activation entry point by selcting the Account icon from the top-left corner of the Overview tab on the Xfinity app and then selecting Activate xFi Gateway or Modem under the Devices section.
Why is my Xfinity Internet so slow at night?
Your internet is slow at night due to network congestion. … You may also have slow internet at night if a lot of people are using your home Wi-Fi at the same time to stream, play online games, and do other bandwidth-heavy activities.
How can I make my Xfinity WiFi stronger?
Take the following into consideration for better WiFi performance:
- Check Gateway/Router Placement. …
- Regularly Restart Your Equipment. …
- Confirm Your WiFi Network. …
- Use a Single WiFi Name for Your Xfinity Home Network. …
- Connect High-Bandwidth Devices via Ethernet. …
- Check Bridge Mode and Antennae for Third-Party Routers.
How far does Xfinity WiFi reach?
Typically wifi doesn’t get much further than a 50-100 feet, particularly in residential locations.
Don’t forget to share the post !