On most dials, the higher number or setting makes the refrigerator colder. If your refrigerator has a range of 1 to 5, turn the dial toward 5 to get a good chill going or turn it toward 1 if you need to warm things up a bit. If your dial has notches on it, turn the dial clockwise to cool things down.
Table of Contents
READ ALSO
Likewise, How do I adjust the temperature on my KIC refrigerator?
To adjust the temperature, follow these steps: Verify the display is not in child lock mode. Press the Freezer button repeatedly to cycle through the available temperature settings. Press the Fridge button repeatedly to cycle through the available temperature settings.
Also, Why is my fridge not cold enough?
Problem: Fridge Not Cooling
Be sure the fridge is plugged in and getting power. … Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan).
Moreover, What is the coldest setting on a freezer 1 or 7?
Your freezer will automatically maintain the temperature level you select. The temperature control dial has 7 settings, plus OFF. “1” is the warmest, “7” is the coldest, and turning the temperature dial to OFF shuts down the compressor.
Is 1 or 7 colder on a freezer?
Your freezer will automatically maintain the temperature level you select. … “1” is the warmest, “7” is the coldest, and turning the temperature dial to OFF shuts down the compressor. Set the dial to “4” and allow 24 hours to pass before adjusting the temperature to your needs.
Which is colder on a fridge 1 or 7?
Usually, a mini fridge dial ranges from 1-7, 1 being the coldest setting, and 7 being the warmest.
Is 1 or 7 the coldest setting on a fridge?
1 is the warmest, 7 is the coldest, and 0 is Off. At first, set the dial to 4 and allow 24 hours to pass before adjusting the temperature to your needs.
How do you fix a refrigerator that is not cold enough?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
Why is my fridge not cold but freezer is working?
When the fridge is not cold but the freezer is, the problem is probably tied to one of your refrigerator’s mechanisms not working as designed. … A small fan and motor are mounted near the evaporator, helping draw air over the coils and circulate it to the fridge and freezer.
What freezer setting is coldest?
The coldest setting is “9” and the warmest setting is “1”. The “0” setting is OFF, which turns the cooling off. Turn knobs to lower numbers for warmer temperatures and to higher numbers for colder temperatures.
What number should freezer be on 1 7?
What is minimum setting? 10F to -10F. The coldest setting is 7 which is about -10F, the number _1_ is the warmest setting. You can set freezer to _4_, the recommended setting.
What is the best setting for a refrigerator?
What Is the Best Temperature for My Refrigerator? The ideal refrigerator temperature is 40 degrees Fahrenheit or below, according to the Food and Drug Administration (FDA). These temperatures inhibit the growth of microorganisms like salmonella, E. coli, and listeria, which can cause foodborne illnesses.
What is the coldest setting on a fridge 1 or 9?
The coldest setting is “9” and the warmest setting is “1”. The “0” setting is OFF, which turns the cooling off. Turn knobs to lower numbers for warmer temperatures and to higher numbers for colder temperatures.
Is 1 or 6 colder on a fridge?
Some fridges don’t show the temperature but work on a setting that is listed from 1 to 5. The numbers on the fridge’s temperature dial indicate the refrigerating power. Therefore, the higher the setting, the cooler the fridge will be. Choosing setting 5 will make your fridge the coldest.
What to check if fridge is not cooling?
Fridge Still Not Cooling? Follow These Steps to Diagnose & Fix it
- Condenser coils are dusty. There are coils located under or behind the fridge that cool and condense the refrigerant. …
- The condenser fan is broken. …
- The evaporator fan is broken. …
- Evaporator coils are covered in frost. …
- Air inlet damper is broken.
How do I know if my refrigerator compressor is not working?
The best way to tell if something has gone wrong with the compressor is to pull the fridge slightly out from the wall and listen closely. If the motor is running with a slight humming sound but the temperature is above what its normal range should be, then it’s likely there could be a problem with the compressor.
What is the first thing to check when a refrigerator stops working?
The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
Why has my fridge gone warm?
Refrigerator Is Too Full
Your refrigerator stays at the proper temperature thanks to cold air that’s consistently circulated through the appliance. If there are too many items in your fresh food compartment, that cold air may not circulate properly, resulting in a refrigerator that’s warm.
Why is my side by side refrigerator not cooling?
If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. The condenser fan motor draws air over the condenser coils to cool them. The condenser fan motor is located underneath the refrigerator near the back.
How do I reset my refrigerator compressor?
4 steps to reset a refrigerator compressor
- Unplug your refrigerator. …
- Turn off the refrigerator and freezer from the control panel. …
- Reset your freezer and fridge temperature settings. …
- Wait for the refrigerator temperature to stabilize.
How do I check the temperature of my freezer?
Instead, simply place the thermometer in the freezer between two pieces of already frozen food in the center of the freezer cabinet. You can also place the thermometer in ice cream. Close the door and wait at least 12 hours to allow the thermometer to get a reading.
What is the coldest setting on a Fridgemaster fridge?
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
Why is the red light on my freezer?
The high temperature alarm or the red light indicator will be on when your freezer is connected to the mains for the first time. This means that the temperature inside your appliance is still too warm. … Your freezer needs to keep the air inside the freezer at a certain temperature to be able to keep food frozen.
