It means you are using detergent improperly. If your washing machine has the word “SUDS” on the display, it has detected an over-sudsing condition, and will stop for a short period to allow the suds to dissipate. This error code is usually caused by too much detergent, or the wrong type of detergent.
Table of Contents
READ ALSO
Likewise, How do I fix my Samsung Washer Sud?
How to fix the error
- Wait for a little for the suds to dissipate. …
- Clean the drain filter upon completing the wash cycle;
- Remove excess powder by running the washing machine without clothes and setting a long wash cycle and high temperature;
- Change the detergent if you notice a lot of suds.
Also, What does Sud lock mean?
Suds lock is the linking of the outer water jacket and the spin bowl with frothy detergent. It makes the spin bowl hard to turn so placing a greater load on the electric drive motor.
Moreover, How do I fix the Sud error on my LG washer?
SUD Error Code
If too many suds are detected during spinning, the washing machine stops to help prevent leaking. Recommended solution: Do not add more than the manufacturer’s recommended amount of detergent. Reduce the amount of detergent used until there is no more sudsing.
What causes excessive suds in washing machine?
The most common cause of excessive foam is using too much detergent or not using a quality detergent like Tide HE Turbo Clean. Tide HE Turbo Clean is specially formulated to deliver the right level of cleaning power when using the recommended dose for your load.
How do you fix a Sud lock?
“Sud LOC” (suds lock – I have too many suds)
Too much detergent may have been used for the amount of soil in the load. Ensure that you are using a HE, Low Sudsing, Matic or Front Loader type detergent. Wait for suds to dissolve (about 20 minutes). Restart the cycle from the start (do not add more detergent).
What does Sud mean in texting?
SUD — Sudden Unexpected Death. SUD — Schedule of Unreconciled Differences.
How do I know if my detergent is high efficiency?
Walk down the laundry detergent aisle in any store, and almost every single bottle, box, and the bag has a little symbol on the label: the letters “h” and “e” separated by a red dot on a field of blue surrounded by a white circle swirl. The HE stands for high-efficiency laundry detergent.
What does Sud on my LG washer mean?
Common solutions for: LG Sud – SUDS LOCK (Overdose of Detergent detected during the Wash Cycle) “Sud” might indicate an extra heavy load but usually is caused by excessive suds in washer due to the use of non HE detergent or too much detergent. … Suds are the foam caused by agitation of the detergent.
How do I run a diagnostic on my LG front load washer?
Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.
What is high suds detergent?
“Controlled foam powdered laundry detergent for multipurpose institutional, industrial and commercial wash systems. Formulated with a balanced blend of synthetic detergents, fortified with surfactants, brighteners, anti-redeposition agents to produce a clean and fresh wash.
Should you see suds in front load washer?
Seeing lots of bubbles or foam is an easy way to ruin your front load washer. The bubbles will overflow the washer and can destroy electronic systems and void warranties. Plus with lower water levels in the rinse cycle, the detergent will be left in your clothes.
What does Oversudsing mean?
Over sudsing, or an excess of soapy water, can be created if users add more than the recommended amount of detergent to the washing machine.
What are suds?
SUDS are drainage systems that are considered to be environmentally beneficial, causing minimal or no long-term detrimental damage. … SuDS are more sustainable than traditional drainage methods because they: Manage runoff volumes and flow rates from hard surfaces, reducing the impact of urbanisation on flooding.
Where is the drain filter on a Samsung front load washer?
All current Samsung Front Load Washers have debris filter access panels located on the front of the unit (bottom left or bottom right). The filter is housed inside of the drain pump to prevent the drain hose from being clogged. If not cleaned regularly, unpleasant odor, draining, and filling issues will arise.
What does Sud mean in address?
Special Utility District. Water, Sanitation, Water Supply. Water, Sanitation, Water Supply. 6. SUD.
What is SUD full form?
SUD. Sudden unexpected or unexplained death.
What is Sud in address?
There are many clinical and community-based interventions that address substance use disorders (SUD), including tobacco use and opioid use disorder (OUD) in pregnant women. …
What happens if you don’t use HE detergent in your HE washer?
Only HE laundry detergent should be used in an HE washer because it is a low-sudsing specially formulated detergent. … Using a non-he laundry detergent in an HE washer can create a sudsing problem that can cause detergent bubbles to fill the washer tub and start to overflow from the detergent drawer.
What brand of detergent is high-efficiency?
Tide brand detergent is the current market leader, with various types of HE and standard detergents, and Tide 2X Ultra for HE washers receives high marks from Consumer Reports.
What are the problems with washing machine?
7 Common problems with washing machine
- Washing machine not starting. …
- Washing machine is noisy. …
- Excessive vibrations during operation. …
- Washing machine making noise when draining or not draining at all. …
- Washing machine over-filling or under-filling. …
- Washing machine not spinning. …
- Water leaking from soap drawer.
How do you reset a front loader washing machine?
How to reset the washing machine:
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
What does Le mean on a LG front load washer?
An LE error code on the washer’s display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur. Performing a reset on the washer will normally resolve this error with a reduced load size.
