Temporarily unplug all the TV connection cables and reboot the TV set. Sometimes, temporarily unplugging the connected cables might help resolve your TV no sound issue. This temporary reset works to clear the short-term memory of the television, and also helps to resolve some other issues.
similarly, How do you troubleshoot an Onkyo receiver?
Hold the “VCR/DVD” button while pressing the “On/Standby” button, and the receiver should enter “Standby.” Turn it on again by pressing the “On/Standby” button. Bear in mind that this will clear all the presets and other settings — but it may be those settings that are causing the problems.
on the other hand, Why has my sound stopped working?
Check your volume settings
Once you open the window, click Open Sound Settings. In the Sound Settings window, click Sound Control Panel. Within the Sound Control Panel, open the Playback tab. … If the sound is not working, right click on the default audio device again, this time selecting Properties.
also, Why is my TV screen black but I can hear it? Replace the HDMI cable as it may have a short or another defect which causes the black screen issue. Unplug the TV for 5 minutes to attempt a reset. Unplugging the TV will reset the television and clear any temporary issues. Factory reset of the TV to resolve the issue.
How do you fix a TV with no picture but has sound?
Step 1:
- Unplug the TV cord from the power socket.
- Leave it unplugged and while it’s unplugged press and hold the Power button on the TV for 25 seconds.
- Release the power button and plug the cord back in. Turn ON the TV using the remote control or manually and check if there’s picture on the Screen.
Is there a reset button on Onkyo receiver?
Hold down the “VCR/DVD” button and, with another finger, press the “On/Standby” button. Watch the display. You should see “Clear” appear on the receiver’s display before it goes into standby mode.
How do you reset Onkyo protect mode?
How to Reset Onkyo Protect Mode
- Unplug the receiver’s power cord from the wall and leave unplugged for at least one hour. …
- Reconnect the power cord after at least one hour has passed. …
- Turn the receiver on and turn the volume to the maximum setting. …
- Turn the volume back to the minimum setting and turn off the receiver.
Why does my phone suddenly have no sound?
Make sure Do Not Disturb isn’t enabled. This handy feature could be the culprit for no sound. To disable this setting, navigate to Settings and turn off the Do not disturb toggle. … Most Android phones automatically disable the external speaker when headphones are plugged in.
Why is my iPhone’s sound not working?
Go to Settings > Sounds (or Settings > Sounds & Haptics), and drag the Ringer and Alerts slider back and forth a few times. If you don’t hear any sound, or if your speaker button on the Ringer and Alerts slider is dimmed, your speaker might need service. Contact Apple Support for iPhone, iPad, or iPod touch.
What do I do if my volume button isn’t working?
iPhone Volume Button Not Working Troubleshooting Tips
- Reboot it. Turn the iPhone off and on again using the power button. …
- Press up and down. Try pressing the volume control up and down several times, alternating. …
- Give it a squeeze. …
- Tap it. …
- Try Assistive Touch. …
- Upgrade. …
- Hard Reset. …
- Hardware.
How do you fix an HDMI black screen?
Unplug the power cord from your digital box, wait for 30 seconds, then plug it in again. Wait until the box has fully powered on again, then see if the picture has returned. If that doesn’t fix it, If you have an HDMI cable connected to your TV, you could try an HDMI handshake.
Why won’t my TV turn on but red light is on?
Try unplugging the TV from the electrical outlet. While its unplugged, hold down the power button on the TV itself for about 30 seconds. Once that time is up, release the button and plug it back into power.
How do I fix my HDMI handshake?
When a HDMI / HDCP Handshaking issue occur the easiest way to re-negotiate the handshake is to power cycle the source device or the display. Always wait 10 seconds or longer when the display or source has been power cycled for the HDMI distribution equipment to reset hdmi handshake / timing.
What do you do when your TV screen goes black?
Here’s how you would fix a black or blank screen on your TV.
- Ensure that the power sources for all your devices (TV, digital box, VCR, etc.) …
- Check that your TV is set to the correct input. …
- Unplug the power cord from your digital box, wait for 30 seconds, then plug it in again.
Why does my TV keep going black for a few seconds?
There may be several reasons for the black screen – most often the problem is the failure of one of the power boards. … Direct the home flashlight beam to the screen of the TV on – if you see an image, the problem is that one of the panels of the TV has failed. The next step is to check the cable and power connections.
How do I factory reset my Integra receiver?
To reset the AV receiver to its factory defaults, turn it on and, while holding down CBL/SAT, press On/Standby. “Clear” will appear on the AV receiver’s display and the AV receiver will enter standby mode.
How do I reset my Onkyo Bluetooth receiver?
Press and hold down 2HOME until the 3 remote indicator lights (about 3 seconds). Within 30 seconds, press 1RCV again.
What is standby hybrid?
Hello. The Hybrid Standby light indicates that there is a feature that is being utilized by the receiver while in “Standby Mode”. This could be many features. If you are using “HDMI Through”, “Network Standby”, “HDMI CEC”, ect, the Hybrid Standby Light will be on.
Why does my receiver go into protect mode?
Your stereo receiver is going into protection mode because the receiver has an internal short, a speaker is bad or the speaker wiring has a problem, such as incorrect wire gauge or bad connections. If the receiver shuts off after connecting a speaker, that speaker’s wiring or the speaker itself has a problem.
Why does my receiver shut off by itself?
If a receiver is not getting enough current, it will turn itself off. If your receiver shares a wall outlet with another high-current appliance (e.g. refrigerator, air conditioner, heater, or vacuum) the receiver may shut itself off when there is insufficient current.
How do you know if your phone speaker is damaged?
Dial *#7353# on your phone to enter the diagnostic tool. To check your phone’s external speaker, select Speaker. You will hear loud music if your phone’s speakers are working fine.
How do I run a diagnostic on my Android phone?
Launch the phone app and open the keypad. Tap the following keys: #0#. A diagnostic screen pops up with buttons for a variety of tests. Tapping the buttons for Red, Green, or Blue paints the screen in that color to make sure the pixels are working properly.
How do I fix my iPhone no sound?
10 Ways to Fix iPhone No Sound Problem
- Check out silent mode button. …
- Restart your iPhone to make sound work. …
- Go to the default settings. …
- Plug in & unplug headphones. …
- Clear any debris. …
- Turn off Bluetooth. …
- Restore an old version with speakers working. …
- Tap the right bottom corner.
Can’t hear on my phone unless it’s on speaker?
Go to Settings → My Device → Sound → Samsung Applications → Press Call → Turn Off Noise Reduction. Your earpiece speaker may be dead. When you put your phone in speaker mode it uses different speaker(s).
Why is iPhone muted?
Check the mute switch
On the upper lefthand side of your iPhone is the hardware switch that you use to turn sound on and off. You know the iPhone is in silent mode if you can see a little strip of orange above the button. … If so, slide it back and your sounds should instantly return.
Don’t forget to share the post !