The F02 error code on a Whirlpool washer indicates that the control detects a long drain time. This can be caused by excessive suds in the tub, a restriction or clog in the drain system, or by a number of other component failures.
similarly, What does F 2 mean on a washing machine?
: The “F2” fault code indicates it’s taking too long to drain the tub of water in order to reset the pressure switch. The problem is that the washer is not always able to drain water so that the water level switch can reset. This can happen if the wrong type of detergent is used or if you are using too much.
on the other hand, What does it mean when a washing machine says F?
The F indicates that the washer control detected a component problem. If the F code was caused by excessive suds preventing the washer from draining, you may be able to shut the door and run a drain/spin cycle to remove the water from the washer.
also, What does F5 and E2 mean on a washing machine? The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.
What is F21 code on Kenmore washer?
The F21 error code indicates a long drain. Here are some tips that should help you resolve this problem: Check your washer drain to make sure that it is draining properly. Check the drain hose for kinks and clogs.
What does Code F mean on Kenmore washer?
The F indicates that the washer control detected a component problem. … If the F code was caused by excessive suds preventing the washer from draining, you may be able to shut the door and run a drain/spin cycle to remove the water from the washer.
How do I fix my F2 code on my Kenmore washer?
How to Fix a Kenmore Washer With an F2 Code
- Clogged or Kinked Drain Hose. The drain hose on a Kenmore washer should remain free of obstructions so the water drains from the washtub. …
- Stuck Water-Level Pressure Switch. …
- Loose Pump Connections. …
- Clogged Drain Pump.
What does F2 mean on a Kenmore washer?
F2. means that the machine contol has sensed a short or open contact within the interface/keypad switch. It can also be caused by using too much detergent or by blockage in the drain pump, drain hose or plumbing.
What does F dL mean on a Kenmore washer?
The Fdl error code indicates that the washer door cannot be locked. This is usually due to a door lock mechanism failure. It can also be caused by a wiring problem or machine control board failure. … When you start the washer, you should hear the lock mechanism attempting to lock the door.
What does F code mean?
FCODE
Acronym | Definition |
---|---|
FCODE | Forth Code (electrical engineering) |
How do I fix F5 on my Kenmore washer?
The f5 indicates a loss of the relay drive circuit. To correct you can turn the power off to the range at the breaker box and wait about 10 minutes, then turn back on. This will reset the board.
How do I reset the F5 on my Kenmore washer?
It goes through the wash cycle and then ends with an F5 error and recurring beeping alarm. The “lid locked” LED flashes as well. The only way to clear the codes is to unplug and let sit, and then plug back in.
What is F5 error code?
An F5 error code indicates that the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time. This occurs when either the controller on the board or the fan malfunctions.
How do you fix F21 codes?
Reset. When the “F21” error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. If water remains in the washing machine tub, touch “Drain/Spin” to force a secondary drain cycle to remove the water. Once all the water drains, try selecting a new wash cycle and pushing “Start.”
How do I reset my Kenmore he2t washer?
To clear and restart the control follow the these steps: * Unplug or turn the circuit breaker off for 30 seconds. * Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet. * Press the Pause/Cancel/Stop button twice to clear the “PF” in the display.
How do I fix the Sud error on my Kenmore Elite washer?
This is often caused by too much detergent being used or non HE detergent being used in an HE machine. Run the machine through a Rinse/Spin cold water cycle then a Normal cycle without adding any additional soap. This will remove as much remaining soap held in the fabric.
How do I reset my Kenmore 700 washer?
How to Reset a Kenmore Elite HE Washer
- Press the “Stop” button twice, and then press the “Power” button.
- Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
- Press the “Start” button to complete the reset process and restart the washing machine. references.
How do I fix the F11 code on my Kenmore washer?
To clear and restart the control follow the these steps: Unplug or turn the circuit breaker off for 10-20 minutes. Reconnect the unit to the power source by turning the breaker back on or plugging the washer back in. Press the Pause/Cancel/Stop button twice to clear the display.
What does F2 error mean?
If you have a GE oven with an electric ERC, F2 means it is over heating. … F2 error code on a range pertains to the oven temperature sensor also known as the thermistor. F2 indicates thermistor has short-circuited therefore not operational. It does not necessarily imply the thermistor is at fault.
How do you reset a Kenmore Elite he3t washer?
How to Reset a Kenmore Elite HE Washer
- Press the “Stop” button twice, and then press the “Power” button.
- Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
- Press the “Start” button to complete the reset process and restart the washing machine.
How dO you reset a Kenmore washing machine?
How to Reset a Kenmore Elite HE Washer
- Press the “Stop” button twice, and then press the “Power” button.
- Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
- Press the “Start” button to complete the reset process and restart the washing machine.
How dO I reset my Kenmore Elite HE4t washer?
How to Reset a Kenmore HE4t
- Press and hold “Drain & Spin” for three seconds to release the child lock, if the keypad is locked.
- Press “Pause/Cancel” twice to cancel the current operation.
- Turn off and unplug the washing machine.
- Wait several minutes before restoring power to properly reset the machine.
How dO I clear the error code on my Whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
Don’t forget to share the post !