If the refrigerator compartment is not getting cold enough it could be a sensor problem or a damper problem or even an evaporator fan or defrost problem as the freezer will always be nearly at the correct temp with a faulty defrost action (evap fan, defrost heater, defrost thermostat) as the evap unit is located there …
similarly, Why does my GE Profile refrigerator freeze up?
The most common cause for GE refrigerators to be freezing food in the fresh food section is the damper that cuts off airflow to the fresh food section will break. … To check this, you will have to remove all the shelves in the fresh food section and remove the air duct in the back.
on the other hand, How do you clean the coils on a GE Profile refrigerator?
Refrigerator – Cleaning Condenser Coils
- Unplug the refrigerator.
- Remove the base grille, if necessary.
- Use a refrigerator condenser cleaning coil brush (GE Appliances part number PM14X51) to brush any dirt, dust, pet hair, etc., from the coils. …
- Sweep or vacuum up any dirt, dust, pet hair, etc., on the floor.
also, What temperature should I set my GE refrigerator? Recommended control settings are 0°F for the freezer and 37°F for the fresh food compartment. To view or adjust the current temperature settings, press the Freezer or Fridge pads or “Warmer” or “Colder” pads (depending on the model) until the desired temperature setting is displayed.
Why is my food freezing in my refrigerator?
The optimum temperature range for storing fresh food is between 38 – 40 degrees Fahrenheit. If your food is freezing, then it is possible that your fridge’s temperature setting was accidentally set too low. This is a common problem that can lead to your refrigerator freezing food.
Where is the defrost drain on a GE Profile refrigerator?
Models with a defrost drain hole located on the back wall of the freezer just up from where the floor slopes up to the back, in the center. Models with a plastic panel held in place by a screw. Remove the screw and panel and the drain hole will be visible. If a drain hole is not visible, service is required.
What is the coldest setting on a GE refrigerator?
The coldest setting is “9” and the warmest setting is “1”. The “0” setting is OFF, which turns the cooling off. Turn knobs to lower numbers for warmer temperatures and to higher numbers for colder temperatures.
Where are the coils on a GE Profile refrigerator?
Condenser coils are located on the back of the fridge or across the bottom. These coils cool and condense the refrigerant. When the coils are clogged with dirt and dust, they can’t efficiently release heat.
How do I clean the coils on my fridge?
How to clean refrigerator coils: A step-by-step guide
- Step 1: Gently pull the refrigerator away from the wall. …
- Step 2: Unplug the refrigerator. …
- Step 3: Locate the coils. …
- Step 4: Start vacuuming. …
- Step 5: Use the paintbrush to remove any stubborn bits of dirt. …
- Step 6: Vacuum up all the dirt you knocked loose onto the floor.
What temp should I set my fridge at?
Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C).
What number should my fridge be set at?
What temperature should a refrigerator be? The U.S. Food and Drug Administration (FDA) says the recommended refrigerator temperature is below 40°F; the ideal freezer temp is below 0°F. However, the ideal refrigerator temperature is actually lower: Aim to stay between 35° and 38°F (or 1.7 to 3.3°C).
Where is the temperature control on a GE refrigerator?
Temperature controls can be found in the back of the fresh food compartment, near the top of the fresh food compartment or on the exterior dispenser control panel.
What is the best temp for a refrigerator?
Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C). Check temperatures periodically. Appliance thermometers are the best way of knowing these temperatures and are generally inexpensive.
What is the best temperature for a GE refrigerator?
GE suggests setting your refrigerator to the recommended temperature in your model’s use & care guide which should be somewhere between 35°-38° F. Use a refrigerator thermometer if your model doesn’t have a digital display that shows the current temperature inside.
What is the normal temperature for a GE refrigerator?
When checked first thing in the morning the normal temperature range should be between 34-42 degrees Fahrenheit in the refrigerator section and between -5 and +8 degrees Fahrenheit in the freezer section for self-defrosting models, and 5 to 7 degrees for non self-defrosting models.
What happens if refrigerator coils are dirty?
When the coils are clogged with dirt and dust, they can’t efficiently release heat. The result is your compressor works harder and longer than it was designed to, using more energy and shortening the life of your fridge. Clean the coils with a coil cleaning brush and vacuum.
How do I clean the back of my fridge?
If yours are on the back of the refrigerator, carefully pull the appliance away from the wall. Use a coil brush (a long, skinny brush similar to a bottle cleaning brush) to clean around the coils. Sweep or vacuum any debris on the floor, move the refrigerator back in place, and plug it back in.
Does cleaning condenser coils help fridge?
Dirty coils force a fridge to work harder keeping food cold, resulting in higher energy costs and a reduced lifespan for the pricey appliance. Fortunately, cleaning your refrigerator’s condenser coils is a simple task for do-it-yourselfers.
What would the symptoms of a dirty coil be?
Symptoms of a Dirty Coil
- Air Conditioning Loses Cooling Capacity. One thing that will be noticeable when the evaporator coil is dirty is that your AC won’t produce air that’s as cold as it should be. …
- Air Conditioning Runs Longer. …
- Coil Develops Frost During Operation. …
- Have an HVAC Professional Clean Your Coils.
What happens if refrigerator coils are dirty?
If the coils are dirty, the refrigerator will have to work harder to release the heat. The condenser coil should be cleaned once per year and can be cleaned even more if you have a lot of dust or pet hair in your kitchen. A dirty coil may affect performance, but you can easily clean it using a vacuum or long brush.
How often should you clean your refrigerator coils?
To keep your refrigerator humming, you should clean coils every six months to a year, more often if you have shedding pets. It’s a short and easy task, and definitely one you shouldn’t avoid.
Is 5 degrees OK for a fridge?
The coldest part of the fridge should be between 0 degrees Celcius and 5 degrees Celcius (32 degrees Fahrenheit and 41 degrees Fahrenheit). You could use a probe thermometer to check if food is being kept hot (above 63 degrees Celcius) or cold (below 8 degrees Celcius).
Why is my fridge temperature too high?
Dirty, dusty, or blocked compressor coils will cause your fridge’s temperature to fluctuate wildly. They need to stay clean to let the heat escape, or it just circulates back into the fridge. Cleaning compressor coils is easy: Unplug your fridge and move it away from the wall so you can get to the coils.
Don’t forget to share the post !