Why is my Samsung refrigerator control panel blinking?

Main control panel is blinking

The temperature display on your fridge will blink if the temperature inside the fridge is above 59 degrees Fahrenheit. … Usually, the temperature in the fridge rises because a door has been left open, or the refrigerator is recovering from a recent power outage.

Likewise, Why is my Samsung fridge running but not cooling?

One of the most common reasons why a Samsung refrigerator is not cooling is a faulty evaporator fan motor. It’s responsible for drawing cold air into the evaporator coils that circulate throughout the fridge. If it fails, there won’t be enough cold air in the refrigerator, preventing it from cooling.

Also, Does a Samsung refrigerator have a reset button?

Reset Instructions

Some models of Samsung refrigerators have a reset button on the inside. If that’s the case, it will be clearly labeled and located either behind the ice bucket or on the control panel. … If the reset has worked, you’ll hear a chime, and the fridge will start back up with the default settings.

Moreover, How do I find the error code on my Samsung refrigerator?

Please press and hold Power Freeze and Power Cool on your display simultaneously for 8-10 seconds until the screen flashes and a chime sounds.

1. If an error code is present, it will be displayed on your fridge’s screen.
2. If more than one error is present, the display will cycle through the codes.

How do I get to the control panel on my Samsung refrigerator?

How do I use the digital control panel on my Samsung fridge-…

1. 1 Energy Saver Button. …
2. 2 Freezer/Hold 3 sec for Power Freezer Button. …
3. 3 Alarm/ Hold 3 sec for Filter Reset Button. …
4. 4 Lighting Button. …
5. 5 Fridge/Hold 3 sec for Power Cool Button. …
6. 6 Ice Off / Hold 3 sec to Child Lock. …
7. 7 Ice Type Button. …
8. 8 Water Button.

How do I reset my Samsung refrigerator not cooling?

Samsung fridges that don’t have a dedicated reset button can usually be reset using a standard key combination. Press and hold the Power Cool and Power Freeze buttons simultaneously for five seconds. If the reset has worked, you’ll hear a chime, and the fridge will start back up with the default settings.

Why is my refrigerator running but not cooling?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. … Plug in the fridge and make sure the fan runs when the compressor is running.

How do I fix my Samsung refrigerator not cooling?

Refrigerator Not Cooling Samsung Repair Options

1. First, check the power. We know, we know. …
2. Remove anything that’s blocking the air vents. …
3. Look at the thermostat. …
4. Vacuum the coils. …
5. Check the seal on the doors. …
6. For top-notch Samsung refrigerator repair, leave it to Puls.

How do I reset my Samsung refrigerator ice maker?

The reset button is located on the front of the ice maker, underneath the motor housing, past the front cover. Press and hold the reset button (you’ll need to apply some pressure here) until you hear the ice tray motor begin to torque, then release.

How long do Samsung refrigerators last?

The average life span of a refrigerator is ten years, but they can last up to 14 years if taken care of properly.

What does error code 41 mean on Samsung refrigerator?

Error 41 indicates a disconnection between the internal modules of Family Hub – the center of artificial intelligence. Because of this, the refrigerator stops working properly: it does not respond to requests, does not connect to the Internet, and loses connection with other components of the Smart Home system.

What is the red symbol on my Samsung fridge?

The filter Indicator will be Red when you have used your water filter for 6 months. If you change the filter, press the Ice Type / Filter Change button for 3 seconds to reset the filter schedule.

What to check if your refrigerator stops cooling?

Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.

1. Make sure your fridge is getting power.
2. Check the refrigerator’s thermostat.
3. Test the seals on your fridge doors.
4. Determine whether the refrigerator is level.
5. Clean the condenser coils.

What is the first thing to check when a refrigerator stops working?

The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.

How can you tell if fridge compressor is bad?

The best way to tell if something has gone wrong with the compressor is to pull the fridge slightly out from the wall and listen closely. If the motor is running with a slight humming sound but the temperature is above what its normal range should be, then it’s likely there could be a problem with the compressor.

How do I run a diagnostic on my Samsung refrigerator?

Please press and hold Power Freeze and Power Cool on your display simultaneously for 8-10 seconds until the screen flashes and a chime sounds.

1. If an error code is present, it will be displayed on your fridge’s screen.
2. If more than one error is present, the display will cycle through the codes.

Where is the reset button on my ice maker?

Look for the Reset Button

To access it, you must first remove the ice tray. Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker, push this button in and hold it for 10 seconds.

How do I unlock my Samsung refrigerator ice maker?

Unlock my Samsung refrigerator ice maker

To unlock it, touch and hold the Door Alarm button until you hear the chime. This usually takes around 3 seconds. Dispenser Lock: Only a few models have this feature. This feature disables the water/ice dispenser, but all other control panels will continue to function.

How do I force my ice maker to cycle?

How to Force an Ice Maker to Cycle

1. Open the freezer door to remove the ice bin from below the ice maker.
2. Empty the ice from the bin. …
3. Press the ice maker toggle switch to the “On” setting if it is not already activated.
4. Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.

What is wrong with Samsung refrigerators?

Thousands of Samsung refrigerator owners are now part of a class action lawsuit. They claim the appliances are defective, blaming the ice makers. The suit says the problems result in leaking and slush, over-freezing in the ice compartment, water leakage and fan noise. Sproul has had those issues since 2017.

Are there any recalls on Samsung refrigerators?

Currently, Samsung does not have a recall in place for any of its refrigerator models when it comes to the ice maker issue. … In addition to the social media complaints, there is also a class-action lawsuit filed in 2017 involving ice maker issues for certain Samsung French door refrigerators.

What brand of refrigerator lasts the longest?

Refrigerators from Whirlpool tend to be highly regarded for their durability and quality. Many households are loyal to Whirlpool, as their fridges last longer than other brands and don’t require as many repairs.

What does 40 E mean on Samsung refrigerator?

So error 40E means your ice maker fan isn’t running properly and 24E means your freezer isn’t defrosting properly. … You’ll need to pull everything out of the freezer and remove the entire back wall inside the freezer. Thaw any ice or frost built up you see with a hairdryer.

What does the plug light mean on Samsung refrigerator?

What it does. Energy Saver icon. This symbol is a two-prong plug, like that of an electric shaver, attached to a light bulb in the power cord. By pressing the Energy Saver button, the symbol lights up and you can get better energy efficiency from your appliance.