Why is my Sharp Smart TV not turning on?

Hard Reset

One common issue with Sharp TVs is that they tend to malfunction if there is a power outage or power surge. … Step 2: Unplug the TV from the power. Step 3: Press and hold the power button on the TV for 30 seconds. Step 4: Wait another 10 minutes with the TV unplugged.

Likewise, How do I reboot my Sharp TV?

How to Reset a Sharp Aquos Lc52d64u

1. Unplug the television.
2. Press and hold the “Channel Down” and “Input” buttons on the panel.
3. Plug the television back in while holding down these buttons. …
4. Keep holding the buttons until the television powers back on.

Also, How do I reset my Sharp TV secret number?

When you have the menu up where you enter the secret number, press and hold both CH ^ and VOL + on the TV. Hold both buttons until the message appears on the screen.

Moreover, How do I get my Sharp TV off standby?

Press “TV Power” on the remote control to power up the TV from standby mode. If the power light on the front of the television glows red when you press “TV Power” on the remote, press the “Main Power” button on top of the television to remove the TV from standby.

How do I reset my Sharp TV without a remote?

How To Reset Sharp Tv Without Remote [Hard Reset]

1. Unplug the television.
2. Press and hold the “Channel Down” and “Input” buttons on the panel.
3. Plug the television back in while holding down these buttons. …
4. Keep holding the buttons until the television powers back on.

How do I reset my Sharp TV secret number?

Start but pressing the ”menu” button on the TV. A message should appear to input secret number. Press and hold both the “VOL (+)” and the CH DOWN on the TV set until the message disappears. This should reset all passwords and settings.

How do I put my Sharp TV in service mode?

Press and hold the {VOL -} & {CH+} buttons. While holding the above buttons, plug in the TV. The TV will turn on with the Service Menu displayed.

How do I reset my Sharp TV without a password?

Reset Sharp TV without Remote to the factory settings

Press and hold together the Channel Down and Input buttons on the panel. Plug the TV on and continue to hold down buttons. You may need the assistance of another person to accomplish this step. Keep holding the buttons until the television powers back on.

How do I manually turn on my Sharp TV?

Press DISPLAY or the MENU button on your Sharp remote control to ensure the TV is turned “On”. If the display Menu does not appear, press the POWER button on the remote control in order to turn On the TV.

Why won’t my Sharp TV turn off?

First, check whether the power light blinks. If it does, unplug the TV from the wall outlet, wait for a few seconds, and then plug it back in to see if it fixes the issue. Sometimes the TV can fail to power up because you are using a remote with dead batteries.

Why is the red light blinking on my Sharp TV?

Blinking red light is a sign of no good and it is definitely related to your TV not turning on. Such problems are common for Sharp TV users and in this regard, there are plenty of troubleshooting methods we have prepared for you. One way to deal with this issue is to power cycle your Sharp TV.

How do I force my Sharp TV to turn on?

Locate the button on the top of the television among the “Volume” and “Channel” buttons. Press the button to switch the television on. If the “Main Power” button is off the remote will not turn on the television. Wait to see if pressing “Main Power” will activate the TV.

How do I reset my TV without a remote?

Unplug the TV’s AC power cord from the electrical socket. Simultaneously press and hold down the Power and volume Down (-) buttons on the TV (not on the remote), and then (while holding the buttons down) plug the AC power cord back in. Continue to hold the buttons down until Erasing screen appears.

How do I troubleshoot my Sharp Aquos TV?

How to Troubleshoot the Sharp Aquos

1. Adjust the audio settings and/or cables. …
2. Check the circuit board. …
3. Reset the TV. …
4. Beware a TV with no sound and no picture. …
5. Check the wire connecting the main board to the LCD controller board if you get a blue screen when turning on your Sharp set.

What is Sharp TV code?

The 4 digit codes for most programmable universal remote controls for Sharp televisions are: 0039. 0093. 0165. 0386.

How do I reset my Sharp Smart TV without a remote?

How To Reset Sharp Tv Without Remote [Hard Reset]

1. Unplug the television.
2. Press and hold the “Channel Down” and “Input” buttons on the panel.
3. Plug the television back in while holding down these buttons. …
4. Keep holding the buttons until the television powers back on.

How do I get sharp service mode?

Service Mode SHARP TV LC-65P6000U

1. Let’s start with turning off your SHARP LC-65P6000U TV. …
2. Afterward, unplug the TV from the power source.
3. Now press and hold together the Input button and Vol – button on your TV.
4. While holding the buttons plug the TV back into power.
5. When the screen turns on you can release the buttons.

How do you unlock control panel on Sharp TV?

Hold the volume down ,input and power buttons simultaneously for a few secs on the tv . This should enable the buttons directly on the tv .

Where are the buttons on a Sharp TV?

[1] On the front side or backside of your Sharp Smart TV, you can see four to five physical buttons. [2] These buttons serve different purposes like turn on/off your Sharp Smart TV, volume controls, input selection, and other options.

Where are buttons on Sharp TV?

[1] On the front side or backside of your Sharp Smart TV, you can see four to five physical buttons. [2] These buttons serve different purposes like turn on/off your Sharp Smart TV, volume controls, input selection, and other options.

Where is the power button for Sharp TV?

It is located on the bottom right side (you are facing the TV) in the back. I might suggest you go to Sharp’s website and pull up the manual for the specific TV it should answer all your questions.

Why does my Sharp TV turn off by itself?

There could be a variety of reasons: Someone presses a remote with the same code. Your TV has a “sleep” timer, so it turns off. Something overheats or is wrong, so it shuts off to protect itself.

Why does my Sharp TV turn on by itself?

Reasons Why Your TV Might Be Turning Itself On

A simple, easily fixed problem is usually the culprit. There might be a stuck power button on the remote, or the remote’s batteries are running low. … Additionally, an internal HDMI or CEC setting could turn on a TV.