When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water.
Table of Contents
READ ALSO
Likewise, What is E2 error in washing machine?
If the LED Lights are flashing with an E2, 5C or 5E error, it is an indication of water drainage issue. Water is not draining from the drum. To resolve the error issue, check the following: • Check drainage pump filter for blockages (e.g. lint, coins hair, clips)
Also, How do I reset my washing machine?
To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.
Moreover, How do I clear E1 F9 code?
Filter clogged
It picks up trash and small objects before they reach the pump, instigating error code E1 F9. To access the filter, unscrew and remove the front panel. Then gently turn it and remove it from the groove.
What does E1 mean?
| Acronym | Definition |
|---|---|
| E1 | Everyone |
| E1 | Enterprise One (JD Edwards software) |
| E1 | Echelon 1 (US DoD) |
| E1 | European Basic Multiplex Rate (30 voice channels; 2.048 Mbps) |
How do I get rid of E2 error on my washing machine?
To do this, disconnect the hose from the sewer and tilt it into the bucket. If the water leaks from the washing machine as usual, then there is a sewerage clogging. Ask a plumber to solve the problem professionally. If the water doesn’t flow or flows poorly, then the problem is in the washing machine.
What does F5 and E2 mean on a washing machine?
The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.
How do I troubleshoot my LG washer?
How to troubleshoot:
- Open the stop valve to its full capacity. It may be closed or opened insufficiently.
- Check the intake hose. …
- The filter screen may be clogged with debris as well. …
- The intake valve is malfunctioning. …
- If the pressure switch is broken, you can repair your LG washing machine yourself.
Does unplugging a washer reset it?
On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it. Although not usually a button, programmable washing machines might have a reset function or position to clear a program problem.
What is IE in washing machine?
An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines are frozen.
Why does my washer keep saying E1 F9?
If F9 E1 (drain pump system problem – long drain) appears in display, the washer is taking too long to drain water. The drain may extend more than 4.5″ (114 mm) into standpipe. … If not, the washer could siphon (fills and drains at the same time). Lower drain hose if the end is higher than 96″ (2.4 m) above the floor.
What is F9 in washing machine?
The F9 error appears when there is an overflow. The Overflow condition will occur when the respective contact on the pressure switch closes and does not open for at least 60 seconds. Not unlikely, the door won’t open, the drain pump won’t stop despite you have repeatedly pressed the PAUSE and/or CANCEL buttons.
What does F9 mean on front load washer?
F9 E1 Code in the display:
This error code indicates that drain times are longer than expected, typically over eight (8) minutes.
What does E1 mean on a Carrier air conditioner?
If an E1 error code shows up in your air handler, that means there is a communication error either with the indoor unit or the outdoor unit. The causes for this could be a wiring mistake, or a faulty control board with the indoor unit or the outdoor unit.
What does E1 code mean on Carrier thermostat?
The E1 code means the sensor in the thermostat is shorted or defective. E1 means you need to replace the thermostat.
What does E1 mean on electric fireplace?
Error E1 is displayed on the control panel. The overheat sensor has been turned on. The sensor will reset if the unit is unplugged. The unit needs to be plugged back in.
How do I fix E2 error?
You can resolve the error by canceling the print job, and then changing the print settings in the printing software. Frist, Press the Cancel button to cancel the print job or clear the error.
How do I fix E3 error on my washing machine?
0C, 0E, E3 code appears on the washer screen. In this case, you need to drain water and remove the laundry. Then, run the rinse mode to clean the drum. Next, start the technique to make sure that the OC error has disappeared.
What does F5 mean on a washer?
A temperature sensor resistance that is out of the normal range is detected by the Central Control Unit. A failed NTC temperature sensor is what causes the F5 error.
What is F5 error code?
An F5 error code indicates that the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time. This occurs when either the controller on the board or the fan malfunctions.
What does F5 mean on my washing machine?
The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range.
Where is the reset button on a LG washing machine?
Sometimes the motor and the control panel don’t communicate initially, resulting in this error code. To reset this issue, the manufacturer advises to unplug the machine, press the Start-Pause button, and hold it in for 5 seconds before restoring power by plugging it into the outlet.
Why is my LG washer not agitating?
#1 If the washer won’t agitate the drive block might be worn out or broken. The drive block connects the washer transmission to the agitator, if it’s worn out the transmission shaft will still move back and forth but the agitator will either stay still or move slightly.
How do I run a diagnostic on my LG front load washer?
Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.
