A Whirlpool refrigerator not making ice may come down to incorrect temperature settings. For proper ice production, the freezer should be set between 0-5°F. If the temperature is too warm, ice may not adequately freeze and can appear smaller or misshapen.
Table of Contents
READ ALSO
Likewise, How do you reset the h20 light on a Whirlpool refrigerator?
Pressing and hold LIGHT and ICE TYPE button for 3 seconds. The status light will turn off when the system is reset.
Also, How do I force my ice maker to cycle?
How to Force an Ice Maker to Cycle
- Open the freezer door to remove the ice bin from below the ice maker.
- Empty the ice from the bin. …
- Press the ice maker toggle switch to the “On” setting if it is not already activated.
- Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.
Moreover, How do you troubleshoot an ice maker?
Ice Maker Troubleshooting Guide
- Check the shutoff arm.
- Check the supply valve.
- Inspect the water supply line.
- Test the shutoff switch.
- Check the freezer temperature.
- Inspect the ejector gear.
- Test the ejector motor.
- Test the ice mold heater.
Where is the water filter reset button on Whirlpool refrigerator?
Locate the water filter button on your refrigerator.
- If you have a side-by-side fridge, the water filter button is above the water tap on the outside of your refrigerator.
- The filter light and reset button are found inside the French door Whirlpool Fridge on the top right side.
How do I force my Whirlpool ice maker to cycle?
Look at the center of the Whirlpool icemaker to find the rotating arm that pushes the ice cubes out. Grab the plastic teeth on the arm, and gently pull them in a clockwise direction. You will hear a slight winding sound. The icemaker should start into its cycle.
Can I pour water into my ice maker?
Pour about 4 ounces of water into the mold of your ice maker and wait at least two hours. If it makes ice, then you’ve confirmed the problem is in the water supply and not the ice maker itself. … About 13 to 14 ounces of water should pour into the cup in this amount of time.
Why does my ice maker not fill with water?
Water may not be reaching the ice maker due to a frozen line, missing filter, or a closed supply valve. … When there is no filter, or it is clogged, the ice maker does not get water. Make sure that the filter is in place, and if it has not been changed in more than six months, replace it with a new one.
Where is the reset button on my Whirlpool ice maker?
Press the Reset Button
- At the bottom of the ice maker.
- Above the ice tray.
- Underneath the ice tray.
Why would an ice maker suddenly stop working?
Cause: A common cause for a clog is frozen water in the line. … Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).
How do I reset my Whirlpool refrigerator after a power outage?
Press and hold “Lock” and “Filter” simultaneously for three seconds to turn the cooling feature back on. Whirlpool refrigerator ON OFF info here. For safety reasons some outlets have a small reset switch that can trip during a power outage.
How do you jumpstart an ice maker?
You should notice two tiny holes labeled “T” and “H,” and this is where you should insert each end of your wire. After a few seconds of holding the wire in the designated holes (and only these holes), you should hear the desired click, which means you have successfully jump started your ice maker.
How do I reset my ice maker?
Unplug the refrigerator for 30 seconds; then plug it back in. Within 15 seconds of restoring power, press the feeler arm three times in succession. This should force the ice maker to run water into the reservoir and begin the cycle of ice production.
How do I unclog my ice maker water line?
Alternatively, you can defrost the water line with a hair dryer or by letting the refrigerator sit unplugged for upward of two hours. Restore power to the refrigerator and listen for the water supply to fill the ice mold. If the clog is anything but translucent, consult with a professional for help removing the clog.
What to check if ice maker stops working?
If your ice maker isn’t producing ice at all or is producing crescents or cubes that are smaller than usual, it’s typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
Can a fridge make ice without a water line?
You don’t need to hook it up if you don’t want ice and water, the fridge will work fine without it. Sorry, there was a problem. … No, you do not have to install the water line. The ice maker itself doesn’t take up too much space in the freezer, so you could just turn it off and pretend it’s not there.
Can water filter cause ice maker not to work?
A clogged or incorrectly installed water filter can reduce the water flow to the ice maker and dispenser and could cause one or more of the following: Odd tasting ice or water. … Ice maker not producing any ice. Measure fill not working correctly.
How do you unclog a refrigerator water line?
Unclog Refrigerator’s Water Dispenser Hose
Find the water dispenser line and unscrew the screws holding it in place. Then hold the water button at the front of your fridge down to see if any water comes through. If it does, it’s likely there was an air clog in the line which should now be removed.
Can a bad water filter cause a refrigerator to not make ice?
A clogged or incorrectly installed water filter can reduce the water flow to the ice maker and dispenser and could cause one or more of the following: Odd tasting ice or water. … Ice maker not producing any ice.
How do I know if my water filter is clogged?
8 Signs Your Refrigerator Water Filter Needs Replacing (& How to…
- 1) Dispensed Water Tastes Bad. …
- 2 Ice has an Odd Smell. …
- 3) Slow Trickle of Dispensed Water. …
- 4) Ice is Coming Out Small. …
- 5) Black Specks in Water or Ice. …
- 6) Water Filter Light Turns On. …
- 7) Murky Appearance of Water or Ice. …
- 8) It’s Been More than a Year.
Does my Whirlpool refrigerator have a reset button?
There is no reset button on a refrigerator,but there are many things that can keep it from cooling. There is not a reset button on most models of refrigerators.
Do fridges have a reset button?
There is no reset button on a refrigerator,but there are many things that can keep it from cooling. … One of the signs that a compressor is failing is that it runs continuously without the refrigerator and freezer compartments reaching their proper operating temperatures.
Why would my refrigerator stop cooling and then start working again?
If the thermostat is adjusted incorrectly, the fridge will turn off and turn on again when the temperature increases. The compressors are responsible for providing power for the cooling process. In this case, it is suggested that you lower the thermostat setting to ensure the compressor keeps working properly.
