The water inlet valve on your washing machine is the part that connects the two water hoses to the machine, and it controls the flow of both hot and cold water. A problem with the valve can cause the washer not to fill properly or not fill at all. … You can also test the valve to determine whether it has failed.
Also, How do I know if my washer water inlet valve is bad?
Regarding this, How can I fix my washer without cold water?
Begin by checking that the hoses are not kinked and that the faucets are fully open. Turn the faucets off, disconnect the fill hoses from the inlet valve, and inspect the screens that are a part of the valve. Remove any sediment or debris you find.
How do you fix the water inlet valve on a washing machine?
– Disconnect the Washing Machine. Disconnect the washing machine from the power supply and the water supplies before you examine the water inlet valve. …
– Check the Filter Screens. …
– Test the Inlet Valve Solenoids. …
– Replace the Water Inlet Valve (as needed)
Furthermore, How do you fix the inlet valve on a washing machine?
How do I know if my inlet valve is bad?
Signs that point to an inlet valve problem include leaks that fill the dishwasher when not running, the dishwasher filling too slowly when in use, or the dishwasher not filling at all. Leaks that end up outside of the dishwasher also can indicate an inlet valve problem, and this must be addressed immediately.
Why does my washing machine have no cold water?
Check the water valve screen for a clog. One half of the water valve can fail and only hot or cold will come into the washer. Select cold or hot temperature and if one or the other does not work the valve screen may be clogged. For information on cleaning the water valve screen, see Washer Slow Fill With Water.
Why does my washer only use hot water?
Check the water valve screen for a clog. One half of the water valve can fail and only hot or cold will come into the washer. Select cold or hot temperature and if one or the other does not work the valve screen may be clogged. For information on cleaning the water valve screen, see Washer Slow Fill With Water.
How much does it cost to replace a washing machine water inlet valve?
Machine Inlet Valve Repair A washing machine inlet valve replacement costs $75 to $125.
Can washing machines run off just cold water?
However, some washing machines may work OK with only the cold fill hose connected. … The washing machine may now use slightly more electricity, but if it’s less than 10 years old it shouldn’t be significant unless you use a lot of 60 or 90 degree washes because they use relatively very little water on wash.
How much does it cost to replace a water inlet valve?
Part Cost to Repair
————— ————–
Inlet Valve $75 – $125
Coupling $80 – $100
Lid Switch $90 – $150
Pressure Switch $100 – $175
Why is my washing machine not filling with cold water?
The water inlet valve on your washing machine is the part that connects the two water hoses to the machine, and it controls the flow of both hot and cold water. A problem with the valve can cause the washer not to fill properly or not fill at all. … You can also test the valve to determine whether it has failed.
How much does a water inlet valve cost?
Part Cost
—————– ————
Water inlet valve $160 or more
Transmission $100-$350
Timer $120-$230
Belt $140-$150
How much does a inlet valve cost?
Part Cost to Repair
————— ————–
Inlet Valve $75 – $125
Coupling $80 – $100
Lid Switch $90 – $150
Pressure Switch $100 – $175
Can I use my washing machine if I have no hot water?
Highly likely that you still can, but the cycle will take longer as the machine will heat the water up itself. …
How do you test a washing machine inlet valve?
Why is the cold water not working?
A more frustrating and difficult-to-fix cause could be a blockage in the pipe, such as from debris that made it inside from the water main, or corroded metal that’s flaked off the inside of the pipe. If only cold water is affected, that would indicate the blockage is not outside, as the hot water remains unaffected.
How do you replace water inlet?
Why is the cold water tap running slow?
Inspect the flexible supply lines under the sink that run from the shut-off valves to the faucet. They may have become crushed or kinked, which will slow the flow of water to the faucet. … If there is a strong flow of water, the pipes are clear and the problem is in your faucet.
How do you clean the inlet valve on a washing machine?
Remove the water inlet screens with your finger or a pair of needle-nose pliers. Brush out any dirt or grit. You can soak the inlet screens in a mild solution of water and vinegar if they are calcified.
Don’t forget to share this post 
