The Siemens QP, QT, QAF, and QPF are the standard “interchangeable” plug-on type breakers used in loadcenters under several brand names including Siemens, Murray, Gould, and Sylvania to name the most common. It also fits most Midwest Power and Milbank Mfg metering equipment.
Type QT breakers are the duplex, triplex, and quadplex version of the QP. They provide space savings inside the enclosure by delivering two 1/2″ breakers in 1″ of space. … These space saver triplex breakers provide a 2 pole common trip breaker for 120/240V AC circuits and two single poles for 120V AC circuits.
Thereof, Are QP and BR Breakers interchangeable?
Cutler-Hammer BR breakers are the same configuration as Siemans QP breakers. Can you use a BR breaker in a Siemans panel, that calls for QP? Legally, no!Mar 10, 2014
Also to know is, What brands of circuit breakers are interchangeable? Streamline Breaker Inventory UL Classified breakers are designed and tested to be both mechanically and electri- cally interchangeable with circuit breakers manufactured by General Electric, Thomas & Betts, ITE/Siemens, Murray, Crouse-Hinds, and Square D.
Subsequently, question is, Are Bryant and Siemens breakers interchangeable? If you find it too costly or difficult to find replacement Bryant breakers, it can be a better option to replace your old Bryant circuit breakers with new ones from Siemens or other compatible brands. Siemens circuit breakers comparison is not easy to make, since Bryant circuit breakers are obsolete.
Also, What circuit breakers are interchangeable?
While you now know that Eaton breakers, Westinghouse breakers, Square D breakers, and Cutler-Hammer breakers are largely compatible, you still need to find the exact models you need for your facility.
What is a QT circuit breaker?
Siemens type QT dual circuit breakers are 1 inch wide and consist of (2) 1-pole breakers, in varying combinations of ampere ratings from 15 to 30 amp. Type QT quad circuit breakers are 2 inches wide and consist of either (1) 2-pole and (2) 1-pole, or (2) 2-pole breakers.
What breakers are interchangeable?
There is no such thing as an interchangeable circuit breaker. There are however CLASSIFIED breakers that are suitable only for replacement of certain breakers in certain panelboards. This information is provided by the classified breaker manufacturer. In this regard, can you use different brand breakers?Mar 18, 2020
What breakers are compatible with Siemens QP?
What breakers are compatible with Siemens QP? The Siemens QP, QT, QAF, and QPF are the standard “interchangeable” plug-on type breakers used in loadcenters under several brand names including Siemens, Murray, Gould, and Sylvania to name the most common.
Are GE and Siemens breakers interchangeable?
Siemens fits GE Siemens breakers can be used in GE breaker boxes, and they are generally known to be compatible. Match the size and voltage requirements when using Siemens breakers, as using the wrong breakers can have dangerous results.
Do circuit breakers need to be the same brand as the panel?
Obviously, the answer is no. Unlike most electrical devices like switches and outlets, circuit breakers are brand specific. In fact, the manufacturers will tell you to only replace or add breakers specifically designed for that brand panel. Even more, only use the type of breaker recommended for the panel.
Are Bryant and GE breakers interchangeable?
The UL-listed breaker is compatible with Westinghouse, Challenger and Bryant load centers and has a maximum load of 240-Volt. Then, are Bryant and GE breakers interchangeable? There is no such thing as an interchangeable circuit breaker.
Are circuit breakers universal?
The circuit load will determine the breaker size you need – and you’ll need to make sure to get the right brand, as all breakers are not interchangeable. … Brand: Always install the correct brand of breakers in your breaker panel. While some breakers are interchangeable, many are not, even if they look the same.
Are Bryant and Eaton breakers interchangeable?
Hereof, are Bryant and Eaton breakers interchangeable? They are not at all the same. BR Bryant and BR Eaton/Cutler hammer are the same. Zinsco is a completely different breaker that are not remotely close.
Are Eaton and Homeline breakers interchangeable?
Likewise, are Eaton and Square D breakers interchangeable? Both breakers fit. Only if the model number of the breaker is listed by the box as acceptable. Nope.
What breaker is compatible with Siemens?
Then, what breakers work with Siemens? The Cutler-Hammer “CL” breakers are classified for use in a Siemens panel.
Are Eaton and GE breakers interchangeable?
Streamline Breaker Inventory UL Classified breakers are designed and tested to be both mechanically and electri- cally interchangeable with circuit breakers manufactured by General Electric, Thomas & Betts, ITE/Siemens, Murray, Crouse-Hinds, and Square D.
Are GE and Eaton breakers interchangeable?
UL Classified breakers are designed and tested to be both mechanically and electri- cally interchangeable with circuit breakers manufactured by General Electric, Thomas & Betts, ITE/Siemens, Murray, Crouse-Hinds, and Square D. Click to see full answer.
Don’t forget to share this post 
References and Further Readings :
