Most circular saws sport a 7 ¼” blade which has a cutting depth of up to just over 2 ½” at 90 degrees and usually less when cutting bezels. The smaller 6 ½” blade cuts to a max depth of 2 1/8″. This means that the two most common blades are not large enough to go through a 4×4 in a single pass.
While a 10 inch blade on a miter saw can cut through a 4×4 in one or two steps, this may not be enough from a practical standpoint. If you want to get the job done faster and smoother you should definitely consider either a 12 inch miter saw of any type or a 10 inch sliding miter saw.
Thereof, Can you cut a 2×12 with a miter saw?
Miter Saw Limitations The biggest drawback of a miter saw is that the smaller (and cheaper) sizes can’t cut completely through wide material, such as 2×10 or 2×12 boards, in one pass. Well, a sliding miter saw can make these cuts, but you’ll spend twice as much for one.
Also to know is, Can a miter saw cut lengthwise? Miter saws can only make cross cuts (across the width of the board) – they can’t make rips (lengthwise cuts). With a non-sliding miter saw, you’re looking at only about a 6-inch max cut width; with a sliding miter saw, this max range jumps to about 10 or 12-inches.
Subsequently, question is, How wide of a board can a 12 inch sliding miter saw cut? Like we said, the principal advantage of a sliding miter saw is that it allows you to cut wider boards. For a example, a 10” non-sliding saw will allow you to cross cut a board up to about 6” wide, while a 12” non-sliding will work for 8” boards (standard 2×8’s).
Also, Can a 12 inch miter saw cut a 4×4?
The short answer is, you need a 12 inch miter saw. Here’s why. A 12” miter saw clearly has a bigger blade. … The cutting capacity is so superior that even the cheapest 12” miter saws on the market will still cut through 4x4s faster and cleaner than the best sliding 10” miter saw.
Can a miter saw make straight cuts?
Power miter saws are designed to make angled cuts for moulding, trim work, rafters and other general carpentry applications. The saws also make straight crosscuts and, when equipped with the right blade, the versatility of a miter saw is an important part of a tool arsenal for professional carpenters as well as DIYers.
How thick can a Mitre saw cut?
Saws start to differ when you look at their blade diameter—commonly 10 inches or 12 inches. The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.
What size miter saw will cut a 4×4?
12 inch
Can a 12 miter saw cut a 4×6?
While a 10″ miter saw will struggle with anything larger than a 4×4, a 12″ cuts quickly and easily through a 4×6 in only one pass. This increased power combined with slightly slower rotating blades also makes 12″ miter saws better at tackling hardwood and other hard-to-cut materials.
What is the best way to cut a 4×4 post?
How wide of a board can a miter saw cut?
A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
How do you cut wood lengthwise?
Can a miter saw be used as a chop saw?
Can I Use a Miter Saw as a Chop Saw? A miter saw operates in a similar way to a chop saw, so you would think the two are interchangeable when it comes to tasks. Sure, you can cut 90-degree angles with a miter saw, just like a chop saw. However, you are limited to the material it will cut.
Can a miter saw cut straight?
The most basic of miter saws (as in, not a chop saw,) offer straight cuts in a variety of angles. The cutting size is dependent on the blade size, but all miter saws can at least cut in 90° and 45° angles.
How do you cut a 4×4 angle?
Can a 12 inch miter saw cut a 4×6?
Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights. This larger saw can cut a maximum thickness of 3 1/2 inches, enough to cut through four-by-fours.
Can a 7 1 4 miter saw cut a 2×4?
The small vertical blade of this slider can cut up to 2X4 lumber. It also cuts 2X lumber in a single pass.
Don’t forget to share this post 
References and Further Readings :