No. Bleach will not damage your sump pump and is recommended for cleaning and disinfecting.
Chlorine shock and less corrosive oxalic acid compounds are sometimes used to kill the iron ochre bacteria – depending on local codes and whether your drain equipment can withstand these chemicals.
Thereof, Why does sump pump smell like sewer?
Dry sump pump. After long periods of use, sump pumps dry out. When this happens, the sewer gas that collects in the pump gets released into the home because the water no longer shields the air from the gases. In the best case, this simply causes a foul odor.
Also to know is, How do I get the sewer smell out of my sump pump? Mix one cup of bleach into a gallon of water and pour it down into the sump pit. You want the drains and pipes within the pit to be covered with water. Add a little more if necessary to bring water back up to the proper level.
Subsequently, question is, How can I make my sump pump smell better? Sometimes during dry periods of the year, water in your home’s sump pump pit evaporates. As the water evaporates from the pit, it releases odorous gases, which you smell in the home. The solution to this problem is an easy DIY task. Mix one cup of bleach into a gallon of water and pour it down into the sump pit.
Also, How do you clear a sump pump blockage?
– Inspect the outlet on the discharge pipe. …
– Remove anything plugging the end of the discharge pipe or hose.
– Unplug the sump pump and float from the electrical outlet.
– Remove the sump basin’s lid.
What can you put in sump pump for smell?
Sometimes during dry periods of the year, water in your home’s sump pump pit evaporates. As the water evaporates from the pit, it releases odorous gases, which you smell in the home. The solution to this problem is an easy DIY task. Mix one cup of bleach into a gallon of water and pour it down into the sump pit.
How do you get the sewer smell out of a drain?
Follow the water with one cup of white distilled vinegar. Immediately after you pour the vinegar, pour half a cup of baking soda down the drain. After two hours, dump a gallon of hot water into the shower drain. Finally, run a drain brush through the drain to clear out any remaining debris.
How do restaurants get rid of sewer smell?
In order to really eliminate those awful sewer smells, use Vapour Block by Brodi, a citrus-based dry drain maintainer that stops drains from drying out, eliminating sewer gas odors.
How do you get rid of iron bacteria in a sump pump?
Eliminating iron ochre bacteria clogs is usually a two-step process. The first step is to scrub the pipe walls and flush away the thick iron ochre residue that’s inside the drain line, foundation drain (“drain tile”), sump pump line or fresh water supply line.
How do you disinfect a sump pump pit?
Though you need to dilute the vinegar with water, otherwise it may damage your sump pump. Mix one part vinegar to two parts water. Pour the vinegar detergent into the sump pump pit and allow to stand. Then clean the sump pump and pit, as described above.
What can I use to clean my sump pump?
Vinegar can be used for cleaning debris and residue in your sump pump. You need to make a detergent of vinegar and water, pour it in your sump pump and let it sit in. After that flush the detergent, and you are good to go. If not used properly, vinegar can damage your sump pump.
How do I stop my drains from smelling?
Dump a good handful of baking soda into the drain, let sit (don’t run any water) for 15 minutes, then pour 1/4 to 1/2 cup white vinegar down. Watch the bubbles, hear the pops and fizz, and let it sit for another 15 minutes. Then, boiling water and voila! It will be right as rain … at least for about six weeks.
Why does my sump smell like sewage?
Broken sewer lines allow the groundwater surrounding homes to saturate with sewage. As this contaminated ground water seeps into the sump pit, the odors start. … Sewage smells from your sump pit are also one of the early warning signs of a sewer line break, a serious plumbing issue.
How do you remove iron Ochre from a sump pump pit?
How do you clear a sump pump line?
Insert a plumber’s snake into the end of the pipe that was connected to the pump, and then try to push the snake through toward the other end. Hold the pipe over a bucket or sink, and spray water down the pipe using a garden hose with a high-pressure nozzle if the plumber’s snake doesn’t remove blockage.
What do you use to clean a sump pump?
Using your garden hose, rinse off any dirt or sludge from the surface of the pump. A plastic scraper or putty knife may be necessary to clean out the sump pump and remove caked on debris. Leave in a safe place to dry. Drain any standing water from your sump pit using a shop vac.
Is the smell of sewage harmful?
Hydrogen sulfide is dangerous even at low levels. Prolonged exposure to sewer gas can cause irritability, headaches, fatigue, sinus infections, bronchitis, pneumonia, loss of appetite, poor memory and dizziness. It affects people and pets that are exposed to it over a long period of time.
Don’t forget to share this post 
References and Further Readings :