1) No, it won’t interfere with the performance or adversely effect it. RedGuard is not harder to adhere to. There is no reason to use both products although it can be easier to use the RedGuard in corners and niches without the build up you can get with kerdi.
RedGard Creates a Waterproof and Crack Resistant Membrane If you can paint a wall you can use RedGard no problem. And for this shower we only needed one gallon.
Thereof, Can you put RedGard over joint compound?
Everything from the shower door outward can be joint compound and paint without the Redgard. If you can draw a straight line right at the edge of the tile just outside the door, you then can cut the Redgard in line with a utility knife and peel away everything on the outside.
Also to know is, How long do you let Thinset dry before applying Redgard? Consequently, how long do you let Thinset dry before applying RedGard? Let this first coat of RedGard dry until the panels appear red in color. This took about 1 to 1.5 hours. Drying time depends mostly on temperature & humidity levels and the surface will appear pink until the the RedGard has completely dried.
Subsequently, question is, Can you tile on top of RedGard? Using RedGard under floor and wall tile will create a barrier that will be undisturbed after the tile is installed and grouted. … When RedGard is wet, it is a hot, fluorescent pink color. When it dries, it is a solid, dark red, so you know when it is time to apply thin-set mortar and tiles.
Also, Will Thinset stick to RedGard?
Mike. You”ll be fine with thinset over Redguard on walls. It’s recommended for waterproofing niches, shelves, and entire shower walls when tar paper or poly are not used as a vapor barrier behind the CBU.
Can you tile over waterproofing?
With tile being applied directly over fluid applications and sheet membranes (using a thinset method), waterproofing doesn’t take long. It works even better when using a one-ply coating to save you further time.
How long do you let Thinset dry before applying RedGard?
Consequently, how long do you let Thinset dry before applying RedGard? Let this first coat of RedGard dry until the panels appear red in color. This took about 1 to 1.5 hours. Drying time depends mostly on temperature & humidity levels and the surface will appear pink until the the RedGard has completely dried.
Can you use modified thinset over Kerdi?
Modified thinset mortars aren’t recommended for use with Kerdi because they must dry out to gain strength, whereas the membrane inhibits drying, which can lead to unpredictable results. … Schluter’s recommendation is to use unmodified thinset mortar when installing Kerdi over most shower substrates.
Will Thinset adhere to metal?
Thinset is used to adhere tile. But it won’t work on metal.
Can you tile over waterproof membrane?
This type of membrane requires at least 2 applications for it to have the proper thickness for shower waterproofing. In warm dry weather it can dry very quickly but may take up to several hours between coats and again before tile can be applied over it. You must allow 12 hours to cure before flood testing.
Can you use modified thinset over Ditra?
Since DITRA is impervious, it does not deprive the mortar of its moisture. This allows the cement to properly hydrate, resulting in a strong, dense bond coat. In general, we don’t recommend the use of modified thin-set mortar to set tile over the membranes because these mortars must air dry to cure properly.
Does Thinset stick to waterproof membranes?
Your tile can then be installed directly onto your walls over the membrane with a proper thinset mortar. When these products set they will create a rubber-like coating on your walls that is waterproof. When used on shower walls it is a (relatively) quick, effective water barrier for your installation.
Can you waterproof over old tiles?
It is possible to waterproof and tile over existing tiles, provided the existing tiles are in good condition and firmly attached to the substrate. … It is possible to waterproof and tile over existing tiles, provided the existing tiles are in good condition and firmly attached to the substrate.
What will Thinset adhere to?
Thinset mortar is often the adhesive of choice for installing ceramic, porcelain or stone tiles. Behaving much like cement or mortar, this material creates a tight bond between surfaces that can stand up to the weight of the heavy tiles.
Can you tile over membrane?
Elastomeric membranes are one of the most durable types of anti-fracture membrane systems that can be installed under a ceramic tile installation. They are flexible membranes sold in long roles and can be used in exterior and interior settings. … Tile is installed directly over the top just as with other underlayments.
How do you install tile on a membrane?
– Cut the membrane to size.
– Apply a layer of thin-set adhesive fortified with latex to the subfloor.
– Roll the membrane out, and position it in place.
– Apply a bed of thin-set without latex additive, and set the tile in it.
Will adhesive stick to RedGard?
I know thinset will stick to Redgard, but the mechanism is different than with an adhesive – the cement grows interlocking crystals into the flexible material as it cures, an adhesive won’t.
Don’t forget to share this post 💖
References and Further Readings :
