No, you do not. But you do need to properly prep the surface first. Wiping it down with a clean soapy rag is always advised, and you may want to use a deglosser. I choose to use an oil-based paint instead which will adhere to a varnished surface and is a great way to prep for a final coat of paint.
Thereof, How do you paint over painted wood furniture?
Also to know is, How do you restore wooden stools?
Subsequently, question is, How do you spray paint metal bar stools? Wipe clean. Applying in a well-ventilated area, begin painting the seat of the stool, holding the can of Krylon® Rust Protector™ Metallic Finish – Satin Nickel 6-8 inches from the surface and paint using a sweeping side-to-side motion with slight overlap. Allow paint to dry for 30-60 seconds.
Also, How do you paint over already painted wood?
Sand rough areas and wipe away dust with a tack cloth. Apply two coats of stain-blocking primer and allow it to dry between coats. Try using a clear primer if you want the wood’s grain to be seen through the paint. Roll or brush on two coats of latex paint in the direction of the wood grain.
How do you fix wooden stools?
What kind of spray paint do you use on metal?
enamel paints
How do you spray paint metal to make it look distressed?
Plain white or a primary color can be roughed up with fine-grit sandpaper to give it a weathered look. Antique spray paint can give the appearance of a timely patina in just one coat. Metal spray paint that is evenly sprayed on the shiny surface of a metal piece will give it an immediate look of age and charm.
Do you need to prime already painted wood?
A coat of primer is recommended for almost all painting projects, whether it’s new drywall, old wood, bare metal, previously painted brick, or any other surface. Primer is essentially sticky, flat paint that is designed to adhere well and to provide a consistent base for topcoats of paint.
What kind of paint do you use for bar stools?
Paint the stool with oil-based paint in the desired color using a clean brush. Apply the paint in thin coats, allowing each coat to dry before applying the next. Two or three thin coats are usually necessary to achieve even coverage.
What kind of paint do you use on wooden stools?
Paint the stool with oil-based paint in the desired color using a clean brush. Apply the paint in thin coats, allowing each coat to dry before applying the next. Two or three thin coats are usually necessary to achieve even coverage.
Can I just paint over old paint?
You can use a primer to thoroughly cover the old color, then apply 1 or 2 coats of the new paint. Paint & primer in one paints are a newer option, which could be ideal for your situation and even shorten the project.
Can I spray paint over painted wood?
As it turns out, not only can you spray paint wood without sanding – you can also spray paint pressed wood/particle board (which some parts of this desk were) and even that papery cardboard panel on the back. All of it you guys. Just spray paint ALL of it. Then let it dry and do it again.
Can you paint over painted furniture?
Repainting Painted Wood Furniture. In conclusion, yes you can paint over painted furniture at your own discretion. … Keep in mind that your paint will only stick to the paint that is on the furniture. If the existing paint is peeling and chipping off you may need to remove it before repainting.
Is it better to spray paint or brush paint metal?
Spray painting is faster than brush painting. Most spray paint is oil-based and provides a more durable finish than latex paint. Spray paint can be used on practically any surface, including wood, metal, wicker, plastic and resin. Spray paint dries much more quickly than brushed-on paint.
Can you paint over stained wood without sanding?
Can you paint over varnished wood without sanding? Yes. … There are a few ways to do this, but we choose to use an oil based primer to prepare our varnished wood for new paint. The oil based primer will stick to varnished or sealed wood.
Can you paint metal with a brush?
Use a brush or roller, or use a spray paint formulated for application on metal (manufacturers like Rust-Oleum and Krylon offer “all surface” spray paint in numerous colors and sheens). Apply several light coats, letting the paint dry for a few hours between coats.
Don’t forget to share this post 
References and Further Readings :
