for a real house no you cannot, 2×4 will not have the structural strength to support a load as a floor house in a house. And if your building a home or adding a addition with 2×4 if it doesn’t fall apart if you have a inspection it will fail inspections. 2×4 are for framing walls not for floor joists.
1 Answer. You can frame a whole house with nothing but 2×4, but it’s easier to do a shed, as you won’t need engineering, probably. … You can use them for roof, floor and even wall framing, but few sheds will need trusses for walls.
Thereof, Should I use 2×4 or 2×6 for shed floor?
The most common option for your floor joist is your standard 2×6. A 2×8 will provide a few additional benefits and have some advantages, but overall, the 2×6 is the most commonly used and budget-friendly option for constructing your shed floor.
Also to know is, Can I use 1/2 inch plywood for shed floor? Use 1/2-inch pressure-treated plywood in a light-duty shed. For basic storage of hand tools such as rakes, shovels, trimmers and others, 1/2-inch pressure-treated plywood as a shed floor will be sufficient.
Subsequently, question is, How much weight can a 2×4 support horizontally? The Sagulator says it will support about 375 pounds (evenly distributed) before there is noticeable deflection. I recommend you go to the site, read the notes, and play around with the numbers yourself.
Also, What is the best wood to use for a shed floor?
The best material for building the floor of your shed is pressure treated lumber. You can certainly use regular non PT but it won’t last very long being that close to the ground.
How much weight can a 2×4 joist support?
around 1,000 pounds
Should I use pressure treated wood for shed floor?
Always use pressure treated lumber when constructing things that will need to stand up to the elements. As for the sheds’ floor deck, use ¾-in. or ½-in exterior-grade plywood.
Can I use 2×6 for shed floor?
Never skimp on the framing lumber for the shed floor 2X6 or even 2X8 lumber should be used if planning on storing heavy items. This lumber need not be rated for ground contact. … Lets face it, an outdoor shed floor is going to be wet from time to time.
How much weight can a 2×4 Rafter hold?
1,000 pounds
How far can a 2×4 span without support?
Rule of thumb is 2X4 will span 6′ , 2X6 = 8′. Who is? Use 2×8’s or don’t bother building it, as it will sag. With a 20 pound dead load, max span for a 2×4 is 5 feet.
What span can a 2×4 support?
The ceiling joists are 2X4s on 16 inch centers that span the 10 plus feet. Likewise, people ask, what is maximum span for 2×4 joist? Also, how far can a 2×4 span without support? In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches.
What size wood should I use for a shed base?
2×6
What kind of plywood should I use for a shed door?
Building a shed door is a relatively basic project. A shed door, for stability, is built out of a box shape using 1-inch-by-4-inch wood beams or 2-inch-by-4-inch wood beams and a 1/4-inch sheet of plywood. A more durable and heavier door uses the 2-inch beams.
How much weight can a 2×4 stud support horizontally?
Accordingly, how much weight can a 2×4 stud support? Depending on the length of wall, a 2×4 wall could support 20,000–30,000lbs.
What is the maximum span of a 2×4 ceiling joist?
The ceiling joists are 2X4s on 16 inch centers that span the 10 plus feet.
How do you build a wood floor for a shed?
– Measure and cut rim joist and floor joist boards from 2×6 treated lumber.
– Set rim joists on shed foundation.
– Nail outer floor joists to rim boards.
– Attach the joist hangers to rim joists.
– Install the rest of floor joists.
– Make sure the floor framing is square.
– Install 3/4 inch plywood.
How much weight can a 2×4 hold horizontally?
3 Answers. The Sagulator says it will support about 375 pounds (evenly distributed) before there is noticeable deflection. I recommend you go to the site, read the notes, and play around with the numbers yourself.
Don’t forget to share this post 
References and Further Readings :