Kitchens: All receptacles serving countertop areas and any receptacle within 6 feet of a sink must have GFCI protection. Laundry, utility, and wet bar sinks: Where receptacles are placed within 6 feet of the outside edge of the sink, they require GFCI protection.
Microwave Oven Circuit The microwave oven needs a dedicated 20-amp, the 120/125-volt circuit to feed it. … This circuit does not need GFCI protection in most areas, but it is sometimes required where the appliance plugs into an accessible outlet.
Thereof, Where is AFCI required?
As of the 2014 NEC, AFCI protection is required on all branch circuits supplying outlets or devices installed in dwelling unit kitchens, along with the 2008 NEC additions of family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, closets, hallways, laundry areas, and …
Also to know is, How far does an outlet have to be from a kitchen sink? 2 feet
Subsequently, question is, What is code for outlets in kitchens? A receptacle outlet must be installed for every kitchen and dining area counter wall space 12 inches or wider. Receptacles must be installed so that no point along the counter wall space is more than 24inches (2 feet), measured horizontally, from a receptacle outlet.
Also, How many circuits are required in a kitchen?
7 electrical circuits
Does a dishwasher need to be on a GFCI?
GFCI protection is not required for receptacles serving appliances like dishwashers, or convenience receptacles that do not supply countertop surfaces. Receptacles installed within 6 ft of the outside edge of a wet bar sink must also be GFCI-protected [210.8(A)(7)].
How many GFCI outlets are required in a kitchen?
Requirement: Provide at least two 20-amp, 120-volt circuits to supply power to GFCI (Ground Fault Circuit Interrupter) receptacles for countertop and eating areas.
Can you have multiple GFCI outlets on the same circuit?
When you need to wire multiple GFCI outlets such as in a kitchen or bathroom you have a couple of options. To save money, you can put in a single GFCI and then wire additional standard outlets to the “LOAD” output from the single GFCI. This provides the same protection as having a GFCI at each location.
How many breakers are needed in a kitchen?
seven circuits
Can I put a GFCI anywhere in a circuit?
You can replace almost any electrical outlet with a GFCI outlet. Correctly wired GFCIs will also protect other outlets on the same circuit. … The electrical code also requires GFCIs in unfinished basements, garages, most outdoor receptacles and places where construction activity occurs.
Do kitchen outlets need to be on their own circuit?
At one time, most kitchen appliances were plugged into ordinary general outlet circuits, but as kitchen appliances have become larger and larger over the years, it’s now standard—and required by Building Code—for each of these appliances to have a dedicated appliance circuit that serves nothing else.
How many GFCI outlets can you have on the same circuit?
1 GFCI outlet
How many plugs should be in a kitchen circuit?
can be plugged in and share the counter-top outlets. The National Electrical Code (NEC) requires that kitchens have at least two separate 20-amp, 120-volt circuits for counter-top outlets, which must also be no more than 4 feet apart.
Where are AFCI required 2017?
As it’s already well known, dwelling units currently require AFCI protection. Now the 2017 NEC is expanding protection to guest rooms and dormitory bathrooms and circuits supplying outlets and devices. The 2014 requirement is that a 125 V 15 A or 20A receptacle has to be located within 50 feet.
Should a microwave be plugged into a GFCI outlet?
Plugging your microwave into a GFCI outlet is not recommended. The microwave may trigger the reset, which can disrupt the flow of your operation.
Does a dishwasher need to be on its own circuit?
Because of the power it needs, a dishwasher should always have its own circuit, separate from the two individual appliance circuits that are often positioned above your countertop. … Dishwashers run on 115-volt or 120-volt power. The dishwasher circuit should be a 125-volt, 15-amp circuit.
Does every outlet in a kitchen need to be GFCI?
Kitchens: All receptacles serving countertop areas and any receptacle within 6 feet of a sink must have GFCI protection. Laundry, utility, and wet bar sinks: Where receptacles are placed within 6 feet of the outside edge of the sink, they require GFCI protection.
Don’t forget to share this post 
References and Further Readings :
