A chandelier requires a hot lead, a neutral and a ground wire connected to the light switch in order to operate. The ground on a chandelier is connected to a copper wire within the junction box that connects back to the grounded bus bar within a breaker panel.
You’re just as well off leaving the wire unconnected as you are trying to ground to plastic. You can wrap the wire around one of the screws that holds the fixture on, but the only purpose it serves is to help hold the fixture up while you wire the black hot and white common wires.
Thereof, How do you install a ceiling light without a ground wire?
Also to know is, How do you ground a chandelier? A chandelier requires a hot lead, a neutral and a ground wire connected to the light switch in order to operate. The ground on a chandelier is connected to a copper wire within the junction box that connects back to the grounded bus bar within a breaker panel.
Subsequently, question is, Is it OK to install a light fixture without a ground wire? Homes built prior to the 1960s did not require you to include a ground wire when installing electrical circuits. In fact, the ground wire is not necessary to complete the circuit; however, the ground wire acts as a safety net in the event of an electrical short.
Also, What if light fixture has no ground wire?
If by chance you are installing an electrical light fixture that has no ground wire into an electrical box with no ground wire as well, then simply connect together the hot wire from the electrical box to the hot (black or red) wire on the light fixture. … Make sure to use wire nuts to attach the wires together.
Do I need a ground wire for a light fixture?
In fact, the ground wire is not necessary to complete the circuit; however, the ground wire acts as a safety net in the event of an electrical short. When a short occurs, the ground wire sends an almost instantaneous signal to turn off the breaker to stop the flow of electricity.
How do you hook up a ground wire to a light fixture?
Wrap the copper or silver ground wires from the light fixture around the ground screw. Then, connect it to the supply ground wire of the junction box with a wire connector. Connect the black or red current wires and the white neutral wires. Then, push the connected wires into the junction box.
What to do if there is no ground wire?
– Run a ground to the box. This would mean running a new wire back to the panel (could be bare copper, but if you’re doing the work may be better just to run a new wire – 14/3 would be the best), which could mean opening up drywall.
– Wire the fan without ground.
How do you ground an old chandelier?
The main stem of the fixture and its arms are typically all screwed together, so grounding the whole chandelier usually involves just running a ground wire down the chain to a place where it can be attached, such as the center threaded pipe at the top.
What do you do if your light fixture has no ground wire?
If by chance you are installing an electrical light fixture that has no ground wire into an electrical box with no ground wire as well, then simply connect together the hot wire from the electrical box to the hot (black or red) wire on the light fixture.
What happens if outlet is not grounded?
Two prong outlets are not grounded, which can leave you unprotected from stray currents and result in electrocution or a power surge through sensitive electronics, often destroying them in the process.
What if my light fixture has no ground wire?
If by chance you are installing an electrical light fixture that has no ground wire into an electrical box with no ground wire as well, then simply connect together the hot wire from the electrical box to the hot (black or red) wire on the light fixture. … Make sure to use wire nuts to attach the wires together.
What happens if you do not connect the ground wire?
The appliance will operate normally without the ground wire because it is not a part of the conducting path which supplies electricity to the appliance. … In the absence of the ground wire, shock hazard conditions will often not cause the breaker to trip unless the circuit has a ground fault interrupter in it.
Does a light fixture need to be grounded?
In fact, the ground wire is not necessary to complete the circuit; however, the ground wire acts as a safety net in the event of an electrical short. When a short occurs, the ground wire sends an almost instantaneous signal to turn off the breaker to stop the flow of electricity.
Can you ground an ungrounded outlet?
The ideal way to repair an ungrounded 3-prong outlet is to establish a continuous electrical path back to the main panel. If the outlet is installed in a metal box and that metal box has metal conduit wiring (BX cable) all the way back to the panel, then you can ground your outlet with just a little work.
Do all light fixtures have a ground wire?
Check for Ground Your new light fixture will have a ground wire (green coated or bare copper). But if you have an older metal box, there may not be a ground wire inside the box to connect to.
What do you do if your light fixture has no ground?
You can either wrap the ground wire in the electrical box with tape and let it float in the electrical box, or you can attach the ground wire in the electrical box to the light fixture, or appliance, itself.
Don’t forget to share this post 
References and Further Readings :
