So no. You don’t need special pavers as you should never have to plate compact them. No the paving contractor is not using a plate compactor at all.
Thereof, How do you compact pavers with a plate compactor?
Also to know is, Is a plate compactor necessary for pavers? Without proper compaction, both the sub-base and pavers lack stability, causing shifting and compression. … After adding sub-base material to the excavated area, a plate compactor should go over each material lift three or four times to achieve proper compaction.
Subsequently, question is, What do you use a plate compactor for? Equipment is a key element in paving and pavement maintenance. One key piece of equipment for almost all jobs is a plate compactor. Plate compactors can be used to compact sub base and asphalt on driveways, parking lots and repair jobs. They are also useful in confined areas where a larger roller may not be able reach.
Also, Do you compact pavers after installation?
Do not compact the bedding layer. There is no such thing as 100% height control in any concrete product. When you do the final compaction, the loose sand will be forced up between the pavers and this will set and secure them. The loose sand will also allow the tamping process to even out the top surface of the pavers.
What size plate compactor do I need for pavers?
For the first steps in a paver project, compacting the excavated subgrade and then the gravel base, ICPI recommends a 7,000-pound plate compactor, likely a reversible. “You could get away with a 5,000-pound machine, but it will take a lot longer,” Bowers points out. After laying the pavers, you need to compact them.
Can I use a plate compactor on pavers?
Compactors are used to settle and compact the base for laying pavers on a patio or sidewalk, and to level the pavers and settle sand between the joints after they are laid. A vibrating plate compactor is best for installing pavers.
Can you use a plate compactor on wet soil?
This soil has no cohesive strength and as a result can’t be molded together when wet and is very crumbly when dry. Because of this, it tends to be more difficult to compact. Once you understand which soil you’re working with, you’ll be able to choose the right piece of equipment.
How do you compact soil for pavers?
That’s why you’ll need to lay a substantial gravel base on top of your dirt. Use road base gravel so that you get the right mix of fine and coarse aggregates for the best compaction. After you lay gravel, you’ll need to spread a smooth layer of concrete sand for your pavers to settle in and stay.
Can you compact gravel in the rain?
2) Granular Soils – Mostly gravels and sand with little to no clay. This soil has no cohesive strength and as a result can’t be molded together when wet and is very crumbly when dry. Because of this, it tends to be more difficult to compact.
Does water help compact soil?
You can use water to compact soil because the water fills in the open pore space and settles the soil. … Low-pressure and drip systems work best because high-pressure water moves soil on the surface and usually runs off the surface before it has time to drain into the soil.
What do you put under pavers?
Sand Bedding Before laying the pavers, a layer of bedding sand is placed over the compacted base material. This layer provides a bed into which the pavers are set. The sand bedding also helps to protect the sand joints from being eroded away. Lay down one inch diameter PVC pipe across the bass material.
Should I wet soil before compacting?
Ensure the moisture content in the soil is correct. Moisture in your soil is vital to achieving proper compaction as the water helps slide soil particles together. Not enough moisture might lead to inadequate compaction; too much moisture will leave water-filled voids that weaken the soil’s load- bearing ability.
Do and don’ts of paver installation?
– People underestimate the amount of work involved with the installation of paving stones. …
– Don’t guess at the size of the area you want cover. …
– Plan the delivery of materials. …
– Don’t over-estimate the amount of work you can get done.
Do you wet crushed rock before compacting?
STEP 1 – EXCAVATING / DIGGING OUT It will vary by situation. Try and wait for the ground to dry if it is a little wet before compacting, but if its unavoidable, add a small amount of large gravel to help bind the wet surface and continue compacting.
Do I need gravel under pavers?
Many professionals recommend gravel bases because they offer the best support for pavers. The gravel allows moisture to get in and drain, and it also absorbs ground tension, which prevents the pavers from sinking. You can buy landscaping gravel, and crushed rock works best.
How thick should stone dust be under pavers?
Pavers for most garden pathway applications should be 2 3/8 inches thick.
Don’t forget to share this post 
References and Further Readings :
