No, the hole should be filled only with the dirt that came out of the hole and tamped back in . Concrete is bad for the wood (erodes it), and gravel simply creates a porous pocket where water can collect. Well tamped soil is very stable and waterproof. Some people use concrete for gate posts for additional stability.
Most 2 rail posts are 6′ long (A 2 rail western red are 5’4″). Split rail fence is rough cut so the exact dimensions vary, but line posts are approximately 3” x 6” x 7′ long. End and corner posts are 4” x 4” x 7′ long. Rails come in a variety of shapes, consistent with the old-time rustic look.
Thereof, Do you Concrete split rail fence posts?
If you want to use concrete, place the post in the hole, fill 12” of dirt, compact. Fill the balance of the hole with concrete. This will form a concrete collar and will allow moisture to drain away from the bottom of the post. The drainage is critical for the longevity of the post and warranty.
Also to know is, How do you install a split rail fence post?
Subsequently, question is, How far apart should posts be for a split rail fence? Allow enough length to put a new scarf on the rail by use of a chain saw or table saw. 5. When installing our 8’6” rails, posts should be spaced approximately 8′ on center. Note: To compensate for short rails you may want to divide the shortage by reducing the length of rails on both the first and last sections.
Also, How much does it cost to install a split rail fence per foot?
With professional installation, a split rail fence will cost you from $12 to $30 or more per linear foot, $1,200 to $3,000 per 100 feet, and $9,960 to $24,900 to enclose an acre.
How long does cedar split rail fence last?
15 to 30 years
How much would a 200 ft fence cost?
Linear Foot Cheaper (Wire or Electric) Moderate (Wood)
———– ————————– —————
1 $1 – $6 $10 – $20
8 $10 – $50 $100 – $200
100 $100 – $600 $1,000 – $2,000
150 $150 – $1,000 $1,500 – $3,000
Do you need to cement split rail fence posts?
No, the hole should be filled only with the dirt that came out of the hole and tamped back in . Concrete is bad for the wood (erodes it), and gravel simply creates a porous pocket where water can collect. Well tamped soil is very stable and waterproof. Some people use concrete for gate posts for additional stability.
How far apart are posts on a split rail fence?
Allow enough length to put a new scarf on the rail by use of a chain saw or table saw. 5. When installing our 8’6” rails, posts should be spaced approximately 8′ on center. Note: To compensate for short rails you may want to divide the shortage by reducing the length of rails on both the first and last sections.
How long will a split rail fence last?
15 years
How do you make a split rail fence?
How do I estimate the cost of a fence?
Fence installation costs $1,500 to $3,000 for an average yard with most homeowners spending about $1,800. New fencing costs $5 to $16 per linear foot, or about $2,016 to $9,011 for 1 acre. Prices depend on the type of fence materials used and the length and height of the fence.
How tall should a split rail fence be?
The two standard fence styles are two-rail, which stand about three feet tall, and three-rail, which stand about four feet tall.
What type of wood is best for split rail fence?
Western Red Cedar
What can I do with an old split rail fence?
You can use old split rail fence posts or rails as a sign post in your yard or garden. Many of us like to put plaques with witty sayings in our gardens. Using dismantled split rail fence is a fun way to do that besides using an ordinary manufactured stake.
How do you install a split rail fence?
How much does an 8 ft fence cost?
8 Foot Wood Fence Cost The average cost to build an 8-foot wood fence is between $21 and $30 per linear foot using pressure-treated pine with dog-ear panels.
Don’t forget to share this post 
References and Further Readings :
