Stud adhesive For fastener/adhesive fixing to timber and steel studs. Must be suitable for fibre cement. … Notched trowel For applying tile adhesive to face of Villaboard™ lining.
James Hardie Villaboard® lining is a premium sanded fibre cement sheet with recessed edges for flush jointing. Villaboard lining is an ideal internal lining for bathrooms, laundries, kitchens and high traffic abuse areas. It is not suitable as an external wall cladding.
Thereof, Can you use Villaboard on floors?
Villaboard is actually a wall lining, not to be used for the floor. For the floor, there’s actually a new product out called Secura wet area flooring (find out more here http://scyon.com.au/secura_wet.html), which is able to be cut like timber, nailed with a nail gun (if you have one!) and is tongue and grooved.
Also to know is, What is the best way to cut Villaboard?
Subsequently, question is, How do I get rid of Villaboard? If you have villaboard walls, you can simply jack hammer the edge tile, get a crowbar behind and start pulling off the walls behind the tiles. This is much easier than rendered surfaces because the villaboard with the old tiles attached will come off in big sections. Be aware that this step will generate a LOT of dust.
Also, What do you cut Villaboard with?
Score-and-Snap The simplest way to cut cement backer board is to score the surface and snap the sheet along the scored line, similar to the way you’d cut drywall. In fact, you can use a drywall utility knife to score backer board, but a better option is a carbide-tipped scoring tool.
Can you tile straight onto Villaboard?
*Villaboard 6mm is suitable for showers and does not require a sealer before tiling. … We recommend the use of a primer on all other substrates to be tiled. By not using a primer, you can void your product and tiling system warranties.
Do you need to waterproof Villaboard?
Villaboard lining is an ideal internal lining for bathrooms, laundries, kitchens and high traffic abuse areas. … Waterproofing of the floor or walls beyond the bath is not required, see Figure 16.
Can you glue Villaboard?
No they are not. Villaboard or cement sheet must use specially designed ribbed head countersunk screws. Do not go below the top level of the sheet, if you want good holding strength. The screw head must be flush with the top surface of the villaboard-no deeper.
Does Villaboard need waterproofing?
Villaboard is a good product and is designed for use in wet areas and has Waterproof rating (WR) so it is not a requirement that it be sealed. However all penetrations including taps and fixing nails Must be coated coated. This can be a simple covering the nails with a dab of sealant.
Does Villaboard need glue?
Villaboard or cement sheet must use specially designed ribbed head countersunk screws. Do not go below the top level of the sheet, if you want good holding strength. The screw head must be flush with the top surface of the villaboard-no deeper.
Do you need to seal Villaboard before tiling?
The cut edges of Villaboard sheets do not need to be sealed – they are completely immune to permamanet water damage. Thoroughly clean all surface dust from lining sheets with a damp cloth before applying tile adhesive to ensure maximum bond.
Can Villaboard get wet?
Holds its strength even when wet Because of its composition, Villaboard lining has a much greater tensile bond strength than plasterboard, which means you can use thicker tiles higher on the wall. It is up to 75% greater than wet area plasterboard when dry, and 300% greater when wet.
How do you cut fiber cement?
– When cutting fiber-cement siding with circular saw, use a blade that has only four or six teeth.
– To keep dust to a minimum, use a circular saw that’s equipped with either a dust-collection bag or electric fan that blows dust into a bucket.
– For a slow, but virtually dustless way to cut siding, use power shears.
Do you need to glue Villaboard?
Do you glue villaboard too? If tiles are going onto the villa, as in most wet areas, no glue, just nail off at 200mm centres on every stud. No need to set them, cos the tiles will cover.
Do you need to seal walls before tiling?
Fresh drywall needs up to a month before it’s ready for tiling, but when the time comes, you won’t have to tape the joints. All you’ll need to do is apply a skim coat and sand. Once done, clean the surface from dust, dry any signs of moisture and apply the adhesive.
Is Villaboard the same as Fibre cement?
James Hardie Villaboard® lining is a premium sanded fibre cement sheet with recessed edges for flush jointing. Villaboard lining is an ideal internal lining for bathrooms, laundries, kitchens and high traffic abuse areas. It is not suitable as an external wall cladding. … applications where walls are prone to damage.
Do I need to waterproof walls before tiling?
Contrary to popular belief, ceramic tile and grout, by themselves are not waterproof. Water can penetrate through cement-based grout and work its way through the substrate. To prevent water damage, you must install a waterproof membrane just below the tile bonding mortar as close to the tile as possible.
Don’t forget to share this post 
References and Further Readings :
