Industry standards state that minimum grout joint width should be 1/16″ wide, but that requires that you have very precisely sized tiles and that you use a non-sanded grout. Sanded grout won’t fit into a grout joint less than 1/8″ wide.
Thereof, How do I know what size grout line to use?
As a general rule, floor tiles should have grout lines of 1/8 inch or larger, depending on the type and size of tile; most floor tiles are 8 inches by 8 inches, but larger versions are available. Special types, such as slate or quarry tiles, often do not have edges uniform enough to look good with tight spacing.
Also to know is, Can I put new grout on top of old grout? While it’s possible to apply new grout over existing grout, the results are usually less than satisfactory. Since the layer of new grout would be very thin and vary in thickness, it may not adhere well and the old grout could show through. Removing grout from a tile floor is not nearly as difficult as it used to be.
Subsequently, question is, Which tile spacer size should I use? The general rule is to use tile spacers of 2 – 3mm for a ceramic wall tile installation and tile spacers of 5mm for a ceramic floor tile installation, but there are numerous factors that can influence the size of the tile spacers you use. Porcelain, granite and marble tiles are generally installed with a 3mm spacer.
Also, How big should grout lines be for 12×24 tile?
If you want a standard look, tile installers recommend grout lines of 1/16 inch for walls and 1/8 inch for floors. For regular-format tiles, between 12 by 12 and 16 by 16 inches, you can stay with those measurements or go up to 3/16, depending on the tile and the look you want.
How big should tile grout lines be?
1/8 inch
What is the best size grout line?
Finished grout lines will vary from 1/16″ to 3/16″. Note that using the smallest grout possible will increase installation time. 3/16″: We recommend a 3/16″ grout size for our Ceramic Tile line. This thickness leaves room for the natural variation in size, and the perfectly imperfect edges of handmade tile.
How big should my grout lines be?
Finished grout lines will vary from 1/16″ to 3/16″. Note that using the smallest grout possible will increase installation time. 3/16″: We recommend a 3/16″ grout size for our Ceramic Tile line. This thickness leaves room for the natural variation in size, and the perfectly imperfect edges of handmade tile.
How do you lay 12×24 floor tile?
What size spacers should I use for 12×12 tiles?
If you want a standard look, tile installers recommend grout lines of 1/16 inch for walls and 1/8 inch for floors.
How much space do you need between tile and grout?
As a general rule, floor tiles should have grout lines of 1/8 inch or larger, depending on the type and size of tile; most floor tiles are 8 inches by 8 inches, but larger versions are available. Special types, such as slate or quarry tiles, often do not have edges uniform enough to look good with tight spacing.
How do I know what size tile spacer to use?
Base the size of the grout joints on the area where the tile will be installed. Wall tiles can have smaller grout joints and smaller spacers than floor tiles. Wall tiles with clean edges can use a grout joint 1/16 inch in size, while floor tiles with clean edges may need a spacer 1/8 inch in size.
Do I have to remove all old grout before Regrouting?
You don’t need to remove all the grout, or even most of it, but removing the dirty grout on the surface gives the new grout something to which to bond. After all, grout primarily is just cement. … Removing much of the grout isn’t necessary; just get it down enough from the surface to allow new grout to bond.
What is the thinnest tile spacer?
Actual finished grout spaces will vary from 1/8″ to 1/4″ if 3/16″ spacers are used. If smaller spacers like 1/8″ are used, it will accentuate the size difference of handmade tile. Finished grout lines will vary from 1/16″ to 3/16″. Note that using the smallest grout possible will increase installation time.
What is the most common grout size?
1/8 inch
What size tile spacers for floor tiles?
The general rule is to use tile spacers of 2 – 3mm for a ceramic wall tile installation and tile spacers of 5mm for a ceramic floor tile installation, but there are numerous factors that can influence the size of the tile spacers you use. Porcelain, granite and marble tiles are generally installed with a 3mm spacer.
How do you remove old grout before Regrouting?
Scrape out some of the old grout with a grout saw, which is available at any home store. Removing much of the grout isn’t necessary; just get it down enough from the surface to allow new grout to bond. Vacuum up any loose dust and particles. Thoroughly wash the wall to remove grout dust and any other film.
Don’t forget to share this post 
References and Further Readings :
