Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
Thereof, Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
Also to know is, How deep should a 6×6 post be in the ground? The depth of your hole should be about 1/4 of the height of your post. For a 6×6 post, the diameter of the holes should be about 12 inches square. As a rule the width of your post hole should never be less than 10 inches.
Subsequently, question is, Is 1 ft deep enough for fence post? You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.
Also, How deep do concrete fence posts need to be?
2 feet
How deep should posts be for a 6 foot fence?
2 feet
How do you install fence posts without concrete?
Backfilling the fence post hole with gravel is another common alternative to using cement. Start with a hole about the size of the one you’d dig if you were using cement, insert a third of the post’s length into the hole, and then fill with crushed gravel, tamping every five inches until flush.
What size posts do I need for a 6ft fence?
The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post.
What is the easiest way to dig a post hole?
How do you drill holes in concrete posts?
How do you dig a 4 foot post hole?
– Step 1: String your line and pound the stakes. …
– Step 2: Carve out a soil divot with a spade. …
– Step 3: Loosen earth with a tile shovel. …
– Step 4: Use your clamshell digger. …
– Step 5: Use a reciprocating saw on large roots. …
– Step 6: Dislodge rocks with a digging bar. …
– Step 7: Tamp the soil with the other end.
How do you dig post holes in rocky ground?
How many feet should be between fence posts?
eight feet
How deep should a 10 foot fence post be?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.
How far apart should fence posts be UK?
1.8m
How do you post holes in concrete?
Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix. Wait about 4 hours to begin constructing your fence or applying heavy weight to your post.
How do you get dirt out of post holes?
Get the hole just about as deep as you need it then put the auger all the way down and bring back up to let the dirt fling out off the flights. Plunge it back in and out a few times like this and the hole will be pretty clean.
Don’t forget to share this post 
References and Further Readings :
