– Remove the cover plate at the bottom of the water heater. …
– Turn the gas control to the “Off” position. …
– Locate the pilot tube. …
– Clean the pilot hole by brushing it with a stiff wire brush.
– Remove the cover plate at the bottom of the water heater. …
– Turn the gas control to the “Off” position. …
– Locate the pilot tube. …
– Clean the pilot hole by brushing it with a stiff wire brush.
Thereof, How do you clean the pilot light on a furnace?
– Cut off the gas to your furnace. …
– Remove the pilot light and thermocouple assembly. …
– Use your pliers or wrench to remove the pilot light and thermocouple from the bracket.
– Using the wire brush, brush away the carbon buildup and soot from both components.
– For hard to reach areas and stubborn buildup, use the metal file.
Also to know is, How do you clean the pilot light on a gas fireplace? – Turn off the fireplace if it is on and shut off the main gas valve. …
– Use a flashlight to look into the tube where the pilot flame comes out. …
– Use a can of compressed air to blow the dust and dirt off of the end of the innermost tube.
Subsequently, question is, Is the pilot light supposed to stay on in a gas furnace? If you have an older gas furnace, your heating unit relies on a little blue flame known as a pilot light to ensure ignition of the burners. Water heaters, gas fireplaces and old gas stoves also often have similar pilot lights. … Since the pilot light needs to remain active, your furnace is always consuming some gas.
Also, Where is the pilot light on furnace?
Step 1: Find the pilot light assembly. It’s usually near the bottom of the furnace and has a gas valve with on, off, and pilot settings. Step 2: Turn the valve to off and wait three minutes. No tools should be required to do this.
Is there a pilot light on my furnace?
If you have an older gas furnace, your heating unit relies on a little blue flame known as a pilot light to ensure ignition of the burners. … If your furnace has a round knob on the gas valve with the words OFF/ON/PILOT, you have what’s known as a standing pilot ignition.
How do I know if my pilot light is out on my furnace?
Remove the front cover panel on your furnace or boiler. This should expose the pilot, which simply looks like a small single burner, kind of like a candle or if you only had a single flame lit on a gas stove. If there is no flame, then the pilot is out.
How much does it cost to leave the pilot light on a gas fireplace?
The pilot light burns significantly less fuel than a fire but it can cost $8 to $10 a month if your fireplace is fueled by natural gas. If your fireplace is fueled by propane, it could cost up to $20 a month. Turning off the pilot would reduce your energy costs during the summer.
What would cause a pilot light to keep going out?
Usually, a problem with the thermocouple causes the pilot light to go out. The thermocouple is the small copper rod that the pilot light hits. The thermocouple’s job is to shut a gas safety valve if the pilot light goes out. That’s important because gas is always being supplied to the pilot to keep the flame lit.
Does cleaning a thermocouple help?
If the Thermocouple is faulty it will cause the unit to shut down. How to clean? Remove Thermocouple from pilot assembly, using steel wool or emery cloth to lightly clean the tip removing any soot or build up that might have accorded due to an improper pilot flame.
How do you relight a pilot light on a furnace?
– Find the pilot light assembly and its reset switch. The furnace’s pilot light is usually positioned at the bottom of the unit by a knob. …
– Set the reset switch to off. Turn the knob to the “Off” setting. …
– Wait a moment. …
– Relight the pilot light. …
– Observe the furnace.
Why won’t my pilot light on my furnace?
There are several possible reasons why your gas furnace pilot won’t light: an ongoing draft, a faulty thermocouple, an accumulation of dirt, or an inefficient supply.
How do you clean dust out of a gas fireplace?
Should I turn off the pilot light on my gas fireplace in the summer?
Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.
What does it mean when your pilot light wont stay lit?
If your furnace’s pilot light won’t stay on, the furnace won’t work. Some common causes include issues with the thermocouple and pilot tube. … A faulty thermocouple may arbitrarily determine that the light is off when you want it on and vice versa. It could simply be that the thermocouple is bent.
How do u light pilot on gas furnace?
Once the gas has had time to dissipate, turn the knob to “Pilot.” Then, hold down the “Reset” button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
How do you reset the pilot light on a furnace?
Once the gas has had time to dissipate, turn the knob to “Pilot.” Then, hold down the “Reset” button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
Don’t forget to share this post 💖
References and Further Readings :
