Rotate the jack handle with the wheel nut wrench counterclockwise to lower the spare tire to the ground. Rotate the tire retainer in the center of the spare tire in a counterclockwise direction until the retainer separates from the tire, then pull the tire from under the truck.
– Step 1: Slide underneath the bumper. Picture in your mind the exact location of the spare tire. …
– Step 2: Insert the ignition key. …
– Step 3: Open the Jack kit. …
– Step 4: Fit the 2nd rod to the female end rod. …
– Step 5: Fit the crowbar to the other end.
Thereof, How do you remove a spare tire without a tool?
You can do so by having a few blocks behind the front wheel tires. Then crawl under the back of the truck. Here, you can slip the spare carrier cable end from the center hole of the rim. You can do this by hand, and you can then pull the tire from under the car.
Also to know is, How do I lower my spare tire without a tool? You can do so by having a few blocks behind the front wheel tires. Then crawl under the back of the truck. Here, you can slip the spare carrier cable end from the center hole of the rim. You can do this by hand, and you can then pull the tire from under the car.
Subsequently, question is, How do I get my spare tire off my truck? Rotate the jack handle with the wheel nut wrench counterclockwise to lower the spare tire to the ground. Rotate the tire retainer in the center of the spare tire in a counterclockwise direction until the retainer separates from the tire, then pull the tire from under the truck.
Also, How do you get the spare tire off a Silverado?
– Insert jack handle into hole.
– Turn the handle repeatedly until the spare tire has come down and the cable is fully slacked.
– Remove retaining clip from cable to free spare tire.
How do you take the spare tire off a Chevy Silverado?
Examine the rear bumper area; you will notice a hole leading to the spare tire winch. Insert the flat end of the extension tool into the hole and into the winch. Turn the tool to the left to lower the spare tire. Once the spare tire is lowered, you can remove the tire from the cable plate by positioning it at an angle.
What is the tool called that lowers the spare tire?
Steelman 7-Piece Spare Tire Retrieval Tool Kit for Mechanics, Lower/Raise Cradle-Suspended Tires, Flat, Pin, Hex, 12 MM Square, Slotted, and ⅜ Inch Square Heads Fit Variety of Vehicles.
How do you unscrew a spare tire?
Try to use a wrench or something similar to try to force it open. (Place it on the wing screw from the top, and twist it off). If this does not work, apply lots of WD40 or similar, and let it work a few hours before having another go. use a hammer and a screwdriver/punch to hit it loose.
How do you get a spare tire off?
Rotate the jack handle with the wheel nut wrench counterclockwise to lower the spare tire to the ground. Rotate the tire retainer in the center of the spare tire in a counterclockwise direction until the retainer separates from the tire, then pull the tire from under the truck.
How long will a spare tire last me?
Safe-Saver/Donut Spare Tire A general rule of thumb is to drive no more than 70 miles and no faster than 50 miles per hour before replacing your donut with a new tire. The biggest reason to use these space savers for a short period of time is because they have little to no tread.
How do you get a spare tire off a truck without a tool?
You can do so by having a few blocks behind the front wheel tires. Then crawl under the back of the truck. Here, you can slip the spare carrier cable end from the center hole of the rim. You can do this by hand, and you can then pull the tire from under the car.
How much does it cost to get a spare tire put on?
If you have all of the tools you need, including a spare tire, then changing a tire will only cost you the price of the tire—which can typically run around $100 for a standard new tire, depending on the size of the car.
Can a spare tire fall off?
Yes, you would be liable for any damages caused by your spare tire falling off your car. You would also be liable for any damages if one of the four attached tires came loose and took off on its own path.
How much does it cost to have a spare tire put on?
If you catch a puncture early, the repair should cost between $15 and $30. Run-flat tires generally call for complete replacement. Tire plug kits are relatively inexpensive if you know how to do the fix yourself. You can find them priced from $10 to $20.
How do you lower the spare tire on a GMC without tool?
You can do so by having a few blocks behind the front wheel tires. Then crawl under the back of the truck. Here, you can slip the spare carrier cable end from the center hole of the rim. You can do this by hand, and you can then pull the tire from under the car.
How do you get the spare tire off a Chevy 1500?
Examine the rear bumper area; you will notice a hole leading to the spare tire winch. Insert the flat end of the extension tool into the hole and into the winch. Turn the tool to the left to lower the spare tire. Once the spare tire is lowered, you can remove the tire from the cable plate by positioning it at an angle.
What tool is used to remove tires?
Lug Wrench
Don’t forget to share this post 
References and Further Readings :
