You need a 12V power cord to use your car stereo power supply for home use, but you can easily get that from a hardware store. Cut the end of the power cord and connect the black wire with the line of white around the stereo’s red and yellow wires. Make sure every wire is completely covered before you plug it in.
– Ground: Connect the radio’s ground wire (black wire) to the (-) power supply output.
– Main power: Connect the radio’s +12V battery wire (usually the yellow wire) to the (+) power supply output.
Thereof, How much does it cost to put a stereo system in your car?
Total Cost You can purchase a high-quality, budget-friendly car audio system for $400 to $500. If you have a little more money to spend on car audio, you can get a superior system for around $1000. Of course, it is possible to spend far more than this on car audio and purchase a multi-thousand dollar system.
Also to know is, Can you hook up a car amp in your house? Yes, it’s possible to use a car amplifier in your house. You can also connect a car amp to any home stereo, your smartphone, and more as an audio source. … Because car amps use a different power source than home stereos the biggest problem is getting them the power they need.
Subsequently, question is, How do you hook up a power supply to a car radio? – Ground: Connect the radio’s ground wire (black wire) to the (-) power supply output.
– Main power: Connect the radio’s +12V battery wire (usually the yellow wire) to the (+) power supply output.
Also, How much power does a car radio use?
200w
What color wires go together in a car stereo?
Most aftermarket head units usually use an orange wire or an orange wire with a white stripe for this. The wire that still shows 12V is the accessory wire, which is usually red in aftermarket wiring harnesses. If only one wire ever had power in this step, it is the accessory wire.
How much does it cost to install a radio?
Cost of Installing the Radio Professionally While they’re not necessarily hugely expensive, you may see prices ranging from $50 to $200 depending on the complexity of the piece. The most complex radio systems may be over $500 to install.
How much does it cost to install a touch screen radio?
Rates for installation range from $150 to $450 depending on where you have the service done. Generally speaking, the more complex the system, the higher the cost to install.
How do you hook up a computer power supply to a car stereo?
How much power does a car radio need?
A typical stereo head unit will need about 5 amps of power. If you want to crank up the volume for parties and plan on using a powerful amplifier, then 5 amps likely won’t be enough either. We do have power supplies available that offer up to 30 amps. Some people will use computer power supplies and they work great.
How many amps does a radio use?
5 amps
How much does Best Buy charge to install radios?
Entertainment Regular Price Total Tech Support Member Price 2
——————————————————— ————- ———————————
Satellite Radio Installation $39.99–$79.99 Included
Car Deck Installation $64.99 Included
Advanced In-Dash Navigation or In-Dash Video Installation $99.99 Included
Standard Speaker Installation $64.99 Included
How many amps does it take to power a car stereo?
5 amps
What color speaker wires go together?
Speaker Terminal Wire Color
——- ———— —————
Left Negative (-) Black
Left Positive (+) Red
Right Negative (-) Green
Right Positive (+) White or Yellow
How many volts does a radio use?
2 volts
How many volts does a car radio use?
Car radios use direct current (DC) voltage to power their electronics while home electronics use alternating current (AC) with a much higher voltage. In fact, car radios can work down to somewhere around 11 volts DC, with 12V to 14.4V being typical when a vehicle’s engine is running.
How much voltage does a radio use?
So it was 0 to 100 volts depending on the design. Now Transistorized radios can work on 1.2 to 3, 6, or 9 volts. And of course for cars, many take 12 VDC.
Don’t forget to share this post 
References and Further Readings :