To determine the maximum load capacity of your deck, start by calculating its total area and multiply by 50 psf. So a 100 sqft deck would be designed to support 5000 lbs. Don’t get confused with what weight you might think or want to load the deck with.
Yes, you can put a hot tub on a deck. Decks built ground level up to 2 feet off the ground can support up to 100 lbs per square foot; sufficient for most hot tubs. But decks 2 feet or higher will need added support. The added support posts should be no more than 30″ apart & ideally placed in poured concrete.
Thereof, How much weight will my deck hold?
In short there’s no one right answer to “how much can my deck hold?” However, one rule of thumb to keep in mind while answering the question is that the answer commonly is that if a deck is properly designed, it’s built to hold 50 lbs. per square foot. It’s possible that it could hold much more weight than 50 lbs.
Also to know is, How do you build a wood fired cedar hot tub? – Finding the wood. Your first task will be to find cedar boards. …
– Cutting the staves. You’ll then need to cut this wood into staves. …
– Doing the joinery. …
– Building the floor. …
– Assembling the staves. …
– Adding the floor drain. …
– Adding the benches. …
– Adding the water.
Subsequently, question is, How do I know if my deck will support a hot tub? In general, most decks can withstand 100 lbs per square foot. So if a hot tub like the one in the example is under that weight, the average deck should be able to support it.
Also, What wood is best for a hot tub?
Red Cedar is the best thermal insulator among the commonly available softwood species and is far superior to brick, concrete, and steel. Properly finished and maintained, cedar will deliver decades of trouble-free service. Siberian spruce hot tubs are the most popular selection.
How much weight can a wood deck hold?
In short there’s no one right answer to “how much can my deck hold?” However, one rule of thumb to keep in mind while answering the question is that the answer commonly is that if a deck is properly designed, it’s built to hold 50 lbs. per square foot. It’s possible that it could hold much more weight than 50 lbs.
What products do you need for a hot tub?
– Test Strips or Test Kit – test spa water 2-3x per week.
– Bromine tablets – for continuous sanitation.
– Bromine Booster – Raises bromide levels after draining.
– Spa Shock – regular super-sanitation, weekly.
– Spa pH & Alkalinity Balancers – as needed.
Will a standard deck hold a hot tub?
Yes, you can put a hot tub on a deck. Decks built ground level up to 2 feet off the ground can support up to 100 lbs per square foot; sufficient for most hot tubs. But decks 2 feet or higher will need added support. The added support posts should be no more than 30″ apart & ideally placed in poured concrete.
How do you build a wood fired hot tub?
Are 2×6 strong enough for deck joists?
2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. … Most decking is not strong enough to support longer spans than 16″. Some builders reduce joist spacing to 12″ on center to strengthen the deck frame or to increase maximum allowable joist spans.
How do wooden hot tubs work?
It works by piping water from the tub, through pipes that are heated by the fire, and then back into the tub. When properly built, the water circulates through the system by convection. This means you don’t need a pump, but it also means the tub will heat slowly.
Will my decking hold a lazy spa?
Yes, any kind of hot tub, including inflatable hot tubs, can go on a wooden deck. However, if the deck is more than 2 feet off the ground, it will likely need additional support to hold the weight. Even inflatable hot tubs can still weigh up to 3,700 lbs full of water and people.
How much weight will a deck hold?
In short there’s no one right answer to “how much can my deck hold?” However, one rule of thumb to keep in mind while answering the question is that the answer commonly is that if a deck is properly designed, it’s built to hold 50 lbs. per square foot. It’s possible that it could hold much more weight than 50 lbs.
How do you know how much weight your deck can hold?
To determine the maximum load capacity of your deck, start by calculating its total area and multiply by 50 psf. So a 100 sqft deck would be designed to support 5000 lbs. Don’t get confused with what weight you might think or want to load the deck with.
How far can a 2×6 joist span without support?
How far can a 2×6 Rafter span without support? The table states that 2 X 6 rafters spaced 16 inches on center (o.c) can span a maximum distance of 13 feet 5 inches.
How much weight can a 2×6 deck hold?
In short there’s no one right answer to “how much can my deck hold?” However, one rule of thumb to keep in mind while answering the question is that the answer commonly is that if a deck is properly designed, it’s built to hold 50 lbs. per square foot. It’s possible that it could hold much more weight than 50 lbs.
How much does it cost to build a cedar hot tub?
Since cedar hot tubs can cost anywhere from $3,000 to $7,000, we thought it’d be fun to document our project for others that may want to do something similar (view original series).
Don’t forget to share this post 
References and Further Readings :