Now look at the lid to see if the other one has come off, if it has, it needs replacing. If there is nothing wrong with the lid switch actuator, then the lid switch may be bad. To check this, first unplug washer, then remove the top off the washer (held on by two screws behind the front).
Thereof, How do you fix the lid switch on a washing machine?
Also to know is, What does the lid switch do on a washing machine? The lid switch indicates to the washing machine when it is safe to proceed to the next cycle, particularly when that cycle is possibly hazardous, such as the agitate or spin cycle. If the switch is broken, the machine interprets that as the lid is open, and will not progress to the next cycle.
Subsequently, question is, How do I fix the lid switch on my GE washer?
Also, How do you remove the lid switch on a washing machine?
How do you take the cover off of a GE washing machine?
How do you manually unlock a GE top load washer?
– Step 1: Remove the four screws and the back panel.
– Step 2: Remove the two screws holding the top cover on. …
– Step 3: Now the top cover can be removed. …
– Step 4: Place a small screwdriver in the hole in the lid lock to unlock it.
How do you check the lid switch on a GE washer?
Turn off the washer and unplug the appliance. Locate the retaining tabs and/or screws that hold the top horizontal panel down. Look for the lid lock switch on the underside of the top panel and where it fits into the appliance. Put the lid back down and plug the washing machine back into the electrical outlet.
How do you test the lid switch on a washing machine?
How do you bypass the lid switch on a GE washer?
Do GE washers have a reset button?
To reset washing machines that use the GE Hydrowave system, start by unplugging the washer for one minute. Plug the washing machine back in and then within 30 seconds, quickly open and close the lid six times. … Raise the lid at least 2 inches and make sure it closes each time. This should complete the motor reset.
How do I remove the lid switch on my GE washer?
How do I reset my GE front load washer?
– Press POWER to turn the washer off.
– Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
– With the power disabled, press and hold the START/PAUSE button for 5 seconds.
– Plug the washer back in, or turn the circuit breaker back on.
How do you take the lid off a washing machine?
Open the lid on the washing machine and place your hand between the drum and the top of the machine. Lift upward and toward you to remove the metal cabinet. If the cabinet does not lift easily, slide it toward the front of the machine, then lift. Be careful not to dent the casing as you take it away from the drum.
Where is the lid switch on my GE washer?
How do you remove the lid switch on a Whirlpool washer?
How do you bypass a washing machine door lock?
– Turn off the washer and unplug the appliance. …
– Locate the retaining tabs and/or screws that hold the top horizontal panel down. …
– Look for the lid lock switch on the underside of the top panel and where it fits into the appliance. …
– Put the lid back down and plug the washing machine back into the electrical outlet.
Don’t forget to share this post 
References and Further Readings :