Override a Home Honeywell Thermostat Find the display button and hold it down while you press the off button. Keep the display button depressed and let go of the off button. While still holding the display button, quickly press the up arrow button. Release all depressed buttons at the same time.
Thereof, How do I reset my Honeywell 7 day programmable thermostat?
– Click on the “SYSTEM”.
– Now, you have to hold the centre button for few settings to get the required option.
– Once you see “Reset to factory settings”, click on it.
– The thermostat will restart and voila! Your thermostat is back to the normal.
Also to know is, How do I turn off the schedule on my Honeywell thermostat? To cancel the temporary setting at any time, press CANCEL. Press HOLD to permanently adjust the temperature. This will over- ride the temperature settings for all time periods. The “Hold” feature turns off the program schedule and allows you to adjust the thermostat manually, as needed.
Subsequently, question is, How do you manually program a Honeywell thermostat? Just press the arrow keys until the desired temperature is displayed on the screen. Your thermostat will display the word “TEMPORARY” on the screen, and the thermostat will then hold the temperature at that level. At the point where you want to resume the program, just hit the RUN SCHEDULE button.
Also, How do I reset my Honeywell programmable thermostat?
– Set the thermostat switch to “Off.”
– Insert a coin into the slot on the battery door to push it open.
– Remove the batteries.
– Insert the batteries backward, so that the negative pole lines up with the positive terminal. …
– Remove the batteries and put them back in the correct way, then close the battery door.
How do you override a permanent hold on a Honeywell thermostat?
To override your program permanently press the hold button. This will turn off the program schedule. Whatever temperature you set will be maintained 24 hours a day until you manually change it.
How do I reset my Honeywell thermostat?
– Set the thermostat switch to “Off.”
– Insert a coin into the slot on the battery door to push it open.
– Remove the batteries.
– Insert the batteries backward, so that the negative pole lines up with the positive terminal. …
– Remove the batteries and put them back in the correct way, then close the battery door.
How do I set up my Honeywell thermostat?
How do I reconnect my Honeywell thermostat to a new WiFi?
How do I fix my Honeywell thermostat?
How do you override thermostat settings?
– Press the hold button to place a hold on the current programming. …
– Press and hold the temperature adjustment button. …
– Change the program.
How do I get my Honeywell thermostat off permanent hold?
How do you remove the temporary hold on a Honeywell thermostat? To cancel the temporary adjustment at any time, press CANCEL. Press HOLD to permanently adjust the temperature. The Hold function disables the program and allows you to adjust the thermostat manually, if necessary.
Why is my Honeywell thermostat not working?
If your screen is blank and unresponsive, or flashing, it may mean your thermostat’s batteries are dying. Try replacing them to see if it helps. This could also be the cause of a loose or poorly attached wire. … If your sensor is broken, your Honeywell thermostat could be reading the wrong temperature in the room.
How do you work a Honeywell thermostat?
How do I reset my thermostat?
– Turn your thermostat off by switching it to the off position.
– Find the breaker that powers your HVAC system and turn it off.
– Wait 30 seconds and turn the breaker back on.
– Turn your thermostat back on.
How do I reconnect my thermostat?
How do you work a thermostat?
Don’t forget to share this post 
References and Further Readings :