Tap Displays, then tap on the panel you want to reboot. Tap Reboot, and then Yes to confirm.
To reset a Sky panel, unlock it, and gain installer and programming access, open the panel, Remove cell module. It cannot be reused. Hold in the panel tamper button until it resets. Then you need to immediately disable the installer lockout.
Thereof, How do I reset my vivint alarm code?
Also to know is, How do I access my vivint installer toolbox? All controller functions are accessed through the installer toolbox, which is hidden in the user interface. It can be accessed by touching a text area on the settings screen and then entering the installer PIN code (see Figure 2 and Figure 3).
Subsequently, question is, How do I change the code on my vivint alarm? – At the home screen, tap the menu icon in the lower right.
– Tap Users.
– Enter your 4-digit PIN.
– Select the user you want to edit.
– Make sure their Separate lock PIN option is toggled on.
– Select Lock PIN to add or edit their door lock code. …
– Under Lock Access, select the door lock(s) you want the user to have access to.
Also, How do you change the battery on a vivint alarm?
What do the lights on Smart Drive mean?
All Off: Your Smart Drive is off or not receiving power. Solid Blue: Your device is powered on, and booting up. … Solid Green and/or Orange: Booting up. Slow Blinking Orange: No internet access, check your device’s network cable and your internet connection. If the connection is good, power cycle the device.
How do I take the lock off my vivint?
From the inside part of your door, slide the cover up and off your door lock. Grip the battery pack from the top and pull it up and out. Remove the old batteries and replace with four AA alkaline batteries. Replace the battery pack and the cover on your smart lock.
How do I reset my Vivint panel?
Tap Displays, then tap on the panel you want to reboot. Tap Reboot, and then Yes to confirm.
How do I unfreeze my Vivint panel?
Remove the top screw, press in the tabs on the top right and left and slowly pull the panel off of the backplate. Hang the panel from the notch on the backplate. Be careful not to drop it.
How do you reset vivint?
Hardware: Press and hold the Reset button on the back of the router for 10-15 seconds, then release. Software: In the Configuration Interface, go to the Advanced tab and under the Administration tab click Factory Defaults. Then click the Restore Factory Defaults button.
What does Smart Drive do?
SmartDrive provides video analysis, predictive analytics and performance programs to help drivers in commercial fleets improve their driving skills and lower operating costs. The company also collects and stores data from almost 200 million risky-driving events, which is used to improve fleet driving patterns.
How do I change my vivint lock?
– At the home screen, tap the menu icon in the lower right.
– Tap Users.
– Enter your 4-digit PIN.
– Select the user you want to edit.
– Make sure their Separate lock PIN option is toggled on.
– Select Lock PIN to add or edit their door lock code. …
– Under Lock Access, select the door lock(s) you want the user to have access to.
How do I reset my Vivint control panel?
Line up the BOTTOM of the panel to the backplate and snap it back in place. Replace the top screw and plug the panel back into the wall. After 10-15 minutes, the panel should finish powering on.
What smart locks work with alarm?
– Yale YRD226. Assure Lock Z-Wave Touchscreen Deadbolt. …
– Kwikset Obsidian. Touchscreen Z-Wave Deadbolt Lock. …
– August Smart Lock Pro. Z-Wave Deadbolt Lock, 3rd Generation. …
– August Smart Lock Pro + Connect. Z-Wave Deadbolt Lock with Connect WIFI Bridge, 3rd Gen. …
– Yale YRL256. …
– Yale YRL236. …
– Yale YRC226. …
– Yale YRC216.
How do I access vivint smartdrive?
– Connect your phone to the Wi-Fi that your panel is connected to and log into Vivint Smart Home app. …
– Tap the Menu icon (3 lines).
– Select Devices from the menu.
– Scroll down and select Connect to the right of the Smart Drive.
Does smart drive record all the time?
The driver-facing camera’s lights will turn on, and the SmartRecorder will record audio and video from the driver-facing camera. Q. … No, the system does not have the ability to remotely record driver or vehicle activities at any time.
Does Samsara dash cam record while parked?
Samsara Cameras, or CMs, record while the vehicle is driving.
Don’t forget to share this post 
References and Further Readings :
