– From the Home screen, press and hold the SIDE button for three (3) seconds.
– Press DOWN to highlight Installer, then press the SIDE button.
– Press DOWN to highlight Reset, then press the SIDE button.
– Press DOWN to highlight Reset, then press the SIDE button.
Bad Wiring Loose connections, frayed wires, and aged wires all can cause your thermostat to eventually lose its connection to your A/C and heating system. Inspect your wiring thoroughly, making sure the connections are tight, and replace any wires as deemed necessary by you or an HVAC professional.
Thereof, How do I know if my heating thermostat is bad?
– Your thermostat has no power or is unresponsive. …
– Your A/C or heater runs constantly and won’t turn OFF. …
– Room temperature and setting don’t match.
Also to know is, What are the symptoms of a bad home thermostat? – Inaccurate temperature readings.
– Low battery warning failure.
– Malfunctioning furnace, air conditioner or total HVAC system.
– Poor interior temperature control.
– Lighting and energy efficiency issues.
Subsequently, question is, Why is my vivint thermostat is not working? If your thermostat is not heating or cooling like it should, check the following: … Make sure your thermostat and your HVAC system have power and the thermostat does not need new batteries. If the thermostat has power and is in the correct mode, there may be an issue with your HVAC system.
Also, How do you troubleshoot a thermostat?
– Batteries – Many programmable thermostats operate on batteries. Remove the cover to the thermostat and replace the batteries if applicable.
– Circuit panel – Check the circuit panel for a tripped breaker.
– Fuse – Many thermostats contain a fuse inside. …
– Wire contacts – It’s possible a wire contact has come loose.
How do you reset your thermostat?
– Turn your thermostat off by switching it to the off position.
– Find the breaker that powers your HVAC system and turn it off.
– Wait 30 seconds and turn the breaker back on.
– Turn your thermostat back on.
Why is my vivint thermostat not working?
If your thermostat is not heating or cooling like it should, check the following: … Make sure your thermostat and your HVAC system have power and the thermostat does not need new batteries. If the thermostat has power and is in the correct mode, there may be an issue with your HVAC system.
When should I reset my thermostat?
Why Reset Your Thermostat Any time you are having an issue with heating and cooling units, such as after a sudden power failure or after your children have had ‘control’ of the system while you’ve been away, resetting the thermostat should be the first thing you try when attempting to rectify HVAC system issues.
How do I know if my digital thermostat is broken?
– Your thermostat has no power or is unresponsive. …
– Your A/C or heater runs constantly and won’t turn OFF. …
– Room temperature and setting don’t match.
How do I reset my heater thermostat?
– Turn your thermostat off by switching it to the off position.
– Find the breaker that powers your HVAC system and turn it off.
– Wait 30 seconds and turn the breaker back on.
– Turn your thermostat back on.
How do I know if my thermostat needs to be replaced?
– Heating or cooling system will not turn off or on.
– The temperature reading is incorrect.
– Recent spike in your energy bill.
– Frequent temperature fluctuations.
– Thermostat is 10 years old or older.
How do I know if my thermostat is accurate?
To do so, locate your home’s thermostat and tape an accurate thermometer on the wall next to it. Wait 15 minutes and check the temperature reading on both devices. A variance of +/- 3˚F is generally acceptable, but anything outside that range means your previously accurate thermostat may require service.
What does resetting your thermostat do?
Resetting your thermostat means you are resetting it to its factory setting, which can help resolve issues with programming, your HVAC system or thermostat connection issues.
How do I set up my vivint thermostat?
Pair a thermostat to the panel/hub: Select Smart Home Devices. Select Z-Wave. Select Add Node. On the thermostat, hold the Element’s side button down for about 6-10 seconds (there is a screen that will pop up after 2 seconds, the second Installer screen will pop up at about 6 seconds).
How do you know when you need to change your thermostat?
HVAC system won’t turn on: The most obvious sign of a bad thermostat is that the HVAC system in your building won’t turn on or respond to the thermostat. You should be able to turn on your heating or cooling system from the thermostat, or change operation back and forth from heating to cooling.
How do I know if my thermostat is working properly?
HVAC system won’t turn on: The most obvious sign of a bad thermostat is that the HVAC system in your building won’t turn on or respond to the thermostat. You should be able to turn on your heating or cooling system from the thermostat, or change operation back and forth from heating to cooling.
Can a bad thermostat cause AC not to cool?
A faulty thermostat may be to blame if the air conditioner short cycles and runs almost nonstop, the living space seems warmer than your desired temperature setting, or you suddenly experience a cooling system failure.
Don’t forget to share this post 
References and Further Readings :