Open the refrigerator’s door and look for the door switches. Press the door switches and the refrigerator temperature button three times within 10 seconds. After releasing the switches, there should be a letter “S” display in the freezer section and an “E” in the refrigerator’s display.
Evaporator Fan Motor is Defective. When you find your Whirlpool refrigerator not cooling but freezer works fine a defective evaporator fan motor is a common part malfunction. … While multimeter testing can confirm this with a lack of continuity, a faulty fan motor requires professional replacement.
Thereof, How do you reset a Whirlpool side by side refrigerator?
Open the refrigerator’s door and look for the door switches. Press the door switches and the refrigerator temperature button three times within 10 seconds. After releasing the switches, there should be a letter “S” display in the freezer section and an “E” in the refrigerator’s display.
Also to know is, Why would my freezer work but not the fridge? The most common cause for this condition is a problem with the defrost system. If the refrigerator freezer is cold but the refrigerator is warm, the evaporator fan motor might have failed. … If the freezer is cold but refrigerator is warm the air damper control might be stuck closed or broken.
Subsequently, question is, How do I get my Whirlpool refrigerator out of showroom mode? Once control panel counts down from three seconds, ‘SHOWROOM’ will appear on control panel. Press and hold COOLING ON/OFF for THREE seconds. LED will light up to indicate cooling is Off.
Also, How do you fix a refrigerator that is not cooling freezer is working?
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out.
Why is my side by side refrigerator not cooling?
The evaporator fan motor circulates the cold air from the coils thru the compartment. If there is only one evaporator it is in the freezer side. … If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective.
How do I fix my refrigerator that is not cooling?
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out.
Is there a reset button on a Whirlpool refrigerator?
To reset your unit after a power outage, press and hold the “Lock” and “Filter” button simultaneously for three seconds. Doing this will turn on the cooling feature of the refrigerator.
How do you unlock the control panel on a refrigerator?
Unlock the control panel on your refrigerator You can unlock it by touching and holding the Door Alarm button until you hear a chime; it usually takes about 3 seconds.
What causes a Whirlpool refrigerator to stop cooling?
Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.
Why the fridge is not cold but the freezer is whirlpool?
Whirlpool Condenser Coils are Dirty. Condenser coils cool refrigerant to maintain a cool temperature within the refrigerator. If the coils become covered with dust and debris, they may not be able to do so effectively. Consequently, your refrigerator won’t get cold but freezer will still maintain its temperature.
What is the first thing to check when a refrigerator stops working?
As obvious as this sounds, often a fridge shuts down completely because it’s simply getting no power. The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
How do you open a locked freezer?
– Unplug your freezer as a safety precaution.
– Unscrew the screws from the existing lock. …
– Organize your new lock kit.
– Attach the new lock to the freezer with the appropriate parts and the screwdriver.
– Plug your freezer in and test your new lock by locking and unlocking it several times.
How do I reset the control panel on my Whirlpool refrigerator?
To reset the control board of this unit, open the door of the refrigerator and locate the door switches. Press both the switches and the refrigerator temperature button up to three times in ten seconds. Release the switches and button, and you will see the letter ‘s’ displayed on the panel of the freezer section.
How do you unlock the control panel on a Frigidaire refrigerator?
Look for a red light on the panel if you have trouble locating the button to turn the lock feature on or off. Once you’ve located the control lock button, hold it in for three seconds or until the small red LED light turns off.
Is there a reset button on a Whirlpool ice maker?
In most cases, to access the reset button, you will need to take the ice tray out. Once that is done, you will be able to see a bright reset button. This will mostly be located on the bottom of your ice maker. When you find this button, you will need to push it down and hold it for roughly for about 10 seconds.
Why is my freezer door so hard to open?
Air inside a fridge or freezer “shrinks” as it gets colder. This can sometimes create suction, which makes it difficult to open the door. If the door is closed quickly or slammed shut, air will be forced out and it may take several minutes for the vacuum to be released, after which the door can be opened normally.
Don’t forget to share this post 💖
References and Further Readings :
