– Open the door/cover over the pilot light access. …
– Use a flashlight or a headlamp to find the burner inside. …
– Turn the gas knob to “Pilot,” press and hold it down. …
– While still holding the gas down, light that pilot. …
– When the flame ignites, continue to hold the gas knob or button down for a full minute.
A water heater that produces no hot water may not be getting power, or it may have a tripped limit switch or one or more failed heating elements. First, check the water heater’s circuit breaker in the service panel to make sure it hasn’t tripped. If the breaker has tripped, switch it off, then switch it back on again.
Thereof, Why has my hot water stopped flowing?
#3: Check Your Hot Water There are many reasons why your water heater can stop working. It could be due to sediment build-up, a leak or because it is unplugged. If you identify your water heater as the cause, you should flush it and let it reheat.
Also to know is, What can cause the hot water to stop working? A water heater that produces no hot water may not be getting power, or it may have a tripped limit switch or one or more failed heating elements. First, check the water heater’s circuit breaker in the service panel to make sure it hasn’t tripped. If the breaker has tripped, switch it off, then switch it back on again.
Subsequently, question is, What would cause a gas hot water heater to stop working? Possible causes include a bad gas control valve, or a cracked or damaged burner. But before spending a lot of money on repairs, consider the likely lifespan of the water heater.
Also, What are the signs that your water heater is going out?
– Your Water Heater is too Old.
– Rusty Water or Heater Inlet Valve.
– Water Heater Noise.
– Water Heater Leaking.
– Water Heater Not Heating.
How do I fix No hot water?
– Bump up the thermostat.
– Check the forecast.
– Relight the pilot light.
– Fix a faulty thermocouple.
– Rekindle a blue flame.
– Inspect the gas line.
– Restart your water heater.
– Reset the circuit breaker.
Why is my hot water not flowing?
If you open the water heater drain and turn back on the cold water supply to the water heater, and if you do NOT see powerful water flow out of the heater tank drain, then the drain valve could itself be blocked by debris (most common) or alternately you might have poor water flow INTO the water heater.
What are the signs your hot water heater is going out?
Delivering Rusty or Cloudy Water Rust deposits or a metallic odor coming out with hot water can signal either rusty pipes or rust inside the water heater. If corrosion is eating away the metal from the inside, leaks are inevitable. Murky water from the tap can also be signs that the water heater will fail soon.
What do you do when you have no hot water?
– Bump up the thermostat. Ideal operating temperatures for hot water heaters are between 122 and 140 degrees Fahrenheit. …
– Relight the pilot light. …
– Fix a faulty thermocouple. …
– Rekindle a blue flame. …
– Inspect the gas line. …
– Restart your water heater. …
– Reset the circuit breaker. …
– Call in the professionals.
What would cause a hot water heater to stop working?
When there’s no hot water, the problem can stem from lack of power, a faulty electric thermostat or a faulty upper electric heating element. … When the water’s not hot enough, the problem can be an undersized water heater, crossed hot and cold connections, or a faulty heating element or thermostat.
How do you know when a hot water heater needs to be replaced?
– An Old Unit. If your water heater is older, you can find its exact age by looking for the serial number on the manufacturer’s sticker near its top. …
– Rusty Water. If your hot water is rusty, your water heater could be rusting on the inside, and it might start leaking soon. …
– Not Enough Hot Water. …
– Rumbling and Noise. …
– Leaks.
Why is my hot water dispenser not working?
The best thing to do is to check if there is an overload in the wall socket then reset it by pressing. If the water coming from the dispenser is too hot, you can solve this by changing and setting temperature of the unit’s thermostat. If it has poor pressure, then there could be an obstruction in the coming water.
How do I know if my gas hot water heater is bad?
– Rusting, either on the tank or in the water.
– Noises.
– Leaks.
– Failure to heat water.
How come when I turn the hot water on nothing comes out?
The ball valve may be stuck, which will have caused the tank to empty. If this is the case, sharply move the float arm to dislodge the valve, and then give it a proper clean. The cold water cistern should fill up and your taps should start working again.
Why is my hot water barely coming out of the faucet?
An insufficient flow of water is usually the result of a blockage, and to remove it, you first have to locate it. A common cause of blockages in kitchen faucets is a build-up of mineral deposits, which can collect in the supply hose, the shutoff valve under the sink or the faucet valve.
How do you know if your water heater is going to explode?
Rotten Egg Odor The smell of rotten eggs near your water heater is another sign your water heater could burst as it indicates a gas leak. Gas leaks occur due to poor installation, damaged gas lines and other system issues. The water heater’s pilot light can ignite the gas, leading to a severe explosion and fire.
Why does my gas water heater keep going out?
Dirty thermocouple: If you can light your pilot light, but the water heater pilot keeps going out, there are many possible causes. One of them is a dirty thermocouple. … Bent thermocouple: Sometimes, when your gas water heater won’t stay lit, if you check the thermocouple, you may see that it has been bent.
Don’t forget to share this post 
References and Further Readings :