– Turn the knob from the “Off” to the “Pilot” position.
– Push in the pilot knob, which manually sends gas into the system.
– Push the igniter button once every second until it lights.
Thereof, What do you do when your gas fireplace won’t turn off?
– Usually there is a rocker switch that is located around your burner which, if in the “ON” position, it will override the remote. Turn the switch to “OFF.”
– There may be a wall switch that allows you to turn your burner on. Turn the switch to “OFF.”
– A slide switch on the receiver has been moved to the “ON” position.
Also to know is, Is it dangerous to leave a gas fireplace on? No, you should not leave your gas fireplace on overnight as you risk carbon monoxide poisoning. Although it’s never recommended, if your gas fireplace has been properly maintained and designed to run continuously, it may be safe to leave it on.
Subsequently, question is, How do I turn off my gas fireplace?
Also, Why does my gas fireplace not turn on?
If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. Pro Tip: If the pilot is lighting, but not staying lit, it indicates that the thermocouple is worn out, Worthen says.
How do you turn on a Lennox gas fireplace?
How do you ignite an old gas fireplace?
Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts.
Is it safe to leave the fireplace on overnight?
Never leave your burning fireplace unattended. It is important to extinguish the fire before going to bed or leaving the house, and imperative that you allow ashes to cool fully before you dispose them, and best to leave them in your fireplace until the following morning if you’ve enjoyed a fire the night before.
How do I turn on my gas fireplace?
Turn the control knob to the off position for at least 5 minutes. Look for a knob on your control panel with the words On, Off, and Pilot on it. If the knob is not in the off position, turn it so that it is. Then, let your fireplace sit for at least 5 minutes, allowing any excess or lingering gas to clear out.
Why is my fireplace not working?
Another common issue with ignition is a dirty pilot light orifice, caused by a buildup of soot and dirt. If you have successfully re-lit your pilot light, ensured that the orifice is clean, and the fireplace still refuses to ignite, there could be an issue with the thermopile, thermocouple or wiring.
Should you turn off your gas fireplace in the summer?
Your Utility Bill Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.
Is it safe to use gas fireplace during power outage?
Yes! All Regency gas fireplaces, inserts, and stoves can operate safely during a power outage. The fireplace will continue to produce radiant heat and warm up the home. If your unit has a blower, it will no longer work; however, a fireplace blower is not necessary for the operation or safety of the fireplace.
What causes a gas fireplace to turn off?
If you get dust in the pilot assembly and the pilot needs to be cleaned out, it produces a “lazy” flame, which will be disturbed by the draught of the main burners. The flame lifts away from the thermocouple and causes the temperature on the tip of the thermocouple to drop. This, in turn, makes the gas valve shut off.
Why did my fireplace turn on by itself?
So, what is the mystery behind why the gas fireplace turns on by itself? The main reason behind this is always the faulty parts. You see, the damaged thermocouple or remote might be the reason. Other times, some wiring issues or switch problem arises that causes the fireplace to light on its own.
Will natural gas work in a power outage?
Simply, you don’t need to turn off your natural gas source when a power outage happens, as it may still be used to power some of your appliances. It is entirely safe to keep it on.
Can you sleep in a room with an open fire?
No, you should not sleep with the fireplace on. If you do so, you risk carbon monoxide poisoning. Also, if a spark flies and catches, your whole house could burn down.
How do you turn off a Lennox fireplace?
Don’t forget to share this post 
References and Further Readings :