– Panel Lock: Press and hold the “Down”, “Scroll” and “Up” keys simultaneously. While you are doing so, the LCD screen displays “Hold the keys to activate the lock”.
– Unlocking the panel: Press “Down”, then “Scroll”, “Down”, “Up” and finally “Scroll”.
Table of Contents
READ ALSO
Thereof, How do I test my hot tub control panel?
Turn the power on and check if the hot tub heats up or starts to filter. The surest way to check if a control panel works is to use one you know is working and connect it to the circuit board.
Also to know is, How do you unlock the Caldera spa control?
Subsequently, question is, How do I reset my hot tub control panel? – Locate the spa’s high-limit reset. This is a red button found on many spa packs. …
– Press the high-limit reset button. …
– Turn on your spa and observe its operation. …
– Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power.
Also, Why won’t my jets work in my spa?
When jets start failing, the most likely case is that your hot tub pump is not working correctly. … Open the access panel and the airlock valve close to the pump. This releases air from the line and purge system, allowing more water to stream through the jets. Clogged filters or water intakes can also cause jet issues.
How do I turn my spa lock off?
To turn off Spa Lock: Press and hold the OPTIONS hard button and the LIGHTS hard button at the same time for 3 seconds. The spa lock icon will turn off.
How do you fix the error code on a hot tub?
– Shut down the spa at the breaker.
– Make sure there is no debris in the water that can get sucked into the pump.
– Take out all of the filter(s) and set them aside.
– Turn spa back on at the breaker with the filters out.
Why has my hot tub stopped working?
The first step to take is to check the circuit breaker panel that your hot tub is hooked up to. … If this restores power to your tub temporarily before the breaker is tripped again, consult an electrician – the problem is likely with your breaker and not your spa. If this does not fix the problem, check the GFI switch.
How do I unlock my hot tub control panel?
To unlock the panel, while holding down the “Temperature” button (or the “Up” button if you do not have the “Temperature” button), gently press and release the “Light” button twice.
How do you fill a Coast spa?
Fill your Coast Spa with your garden hose. Place the hose in the filter canister and secure the hose in place. Filling through the filter helps to allow most of the trapped air in the pumps and heater to be eliminated. Fill the spa between ½ and ¾ of the way up the skimmer opening.
How much does it cost to fill a hot tub with water?
Filling up your hot tub with water isn’t a once-and-done thing, as the spa needs to be drained and cleaned every 3 to 4 months. The average water bill for a 6-7 person hot tub such as the Optima, Chelsee or McKinley would be $10-$13 per fill. Avearge cost of water: $40-$52 per year.
Where is the reset button on a Jacuzzi?
Where is the reset button on a Hot Springs hot tub? The reset button is located in the equipment compartment. Plug the spa back into the power source. Check the circulation pump if the spa does not heat while jets and lights are working.
What does code SL mean on hot tub?
No current water temperature
How do you fill a hot tub with water?
How do I test my hot tub with a multimeter?
You test the element by using an Ohm meter, or any multi-meter will work also. Just place it on Ohms, at 1000, and place your test leads on each of the terminals (power to spa heater should be off). As mentioned above, a measurement of 9-12 Ohms of resistance usually indicates a good element.
How do you test a heater with a multimeter?
Do hot tubs have a reset button?
A spa heater has a high-limit reset button. A spa or hot tub provides a form of personal relaxation known as hydrotherapy. … A spa heater may need to be reset if it has tripped or stopped working. Using the high-limit reset switch and checking all breakers and GFCI outlets can reactivate the spa’s heater.
Don’t forget to share this post 💖
References and Further Readings :
