If you are a current ADT customer who is paying for monitoring service you can upgrade your system at anytime. There are special upgrade packages for customers who have had monitoring for at least two years. Call them directly at 1-888-238-2727.
Thereof, How do I reset my ADT keypad?
The security system may need to be reset by entering your code into your system and hitting off twice. Remember to remove the system from Test Mode. Go to MyADT.com and click on My Alarm from the System Management option, select Stop Test to remove the system from test mode and restore operations.
Also to know is, How do I clear the ADT alarm memory? To clear the event memory and remove the ALARM SILENCED message from the display, enter a valid passcode and press the ESC key, or re-arm the area. If a fire trouble still exists, the display shows FIRE TROUBLE. To remove this display, the fire point(s) must be returned to normal.
Subsequently, question is, How do I arm my ADT alarm? – To arm your system, tap the green icon.
– Choose if you’d like to arm your system STAY or AWAY.
– STAY is used to arm the system with people or pets inside the premises.
Also, Can ADT use an existing alarm system?
Can I use my current home security equipment with ADT? ADT does offer a $19.99 per month basic security plan if you have a pre-existing home security system in your home. They can take over that equipment to make it work with their monitoring service.
Can you use ADT security system without service?
If you are asking if you can use an ADT without monitoring, the answer is yes. As long as you don’t owe ADT for any signed contract, you should be able to cancel the monitoring service and then just use it as a local non-monitored system. It depends on your definition of “self monitor”.
How do I message my ADT keypad?
How do I bypass the zone on my ADT keypad?
– Enter the following: Your 4-digit code. The number 6 (bypass button) Two-digit zone number of the zone you want to bypass. (01, 02, 03, etc.)
– Repeat this process for all zones you would like to bypass.
– Once your system is disarmed, this process will need to be repeated in order to arm your system again.
What does FC mean on ADT alarm pad?
failed to communicate
What is ADT arm stay?
Armed Stay is designed for when you plan on arming the system and staying in the home. … Arming in the Away Mode will not automatically bypass any sensors, and the entire system, including motion sensors will be armed. Arming in this mode also allows both an exit and an entry delay for zones programmed with delay.
How do I arm my alarm system?
– Bypass sensors. Most systems require users to bypass sensors before arming the system. …
– Choose an arming type. …
– Configure arming settings. …
– Provide a code. …
– Wait out exit delay. …
– Disarm the system.
What does bypass mean ADT?
6 Bypass – Indicates that there are zones automatically or manually bypassed. 7 Program – indicates that the system is in Installer’s Programming, or the keypad is busy. 8 Away – Indicates that the panel is armed in the Away Mode. … 10 Stay – Indicates that the panel is armed in the Stay Mode.
How do I arm my ADT alarm system?
– To arm your system, tap the green icon.
– Choose if you’d like to arm your system STAY or AWAY.
– STAY is used to arm the system with people or pets inside the premises.
How do I know if my ADT system is armed?
At the end of the exit delay, all keypad lights, except the Armed light, turn OFF. LCD5500Z keypads display “System Armed in Away Mode” and “Enter Code to Disarm System”. The system is now armed.
What does Supervision mean on ADT?
system understands
How do I arm off my ADT system?
How do I reset my ADT alarm code?
To change the user codes in the ADT system with keypad controls, press the star key and then the number 5 to indicate you want to reprogram a number. Enter your four- or six-digit master code number. Select the user access code you want to change, identified by entering 01 through 32.
Don’t forget to share this post 
References and Further Readings :