Look at both sides of the mulching blade. Most blades have the word “bottom” stamped on them, or they have a model number imprinted onto the underside. Whether a word or a number, that side of the mulching blade must face the ground after it is installed and the mower is standing upright.
Fit the mulch plug onto the mower deck lip and remove the tape from the metal deflector and discharge chute so that it falls into place. Insert the carriage bolt into the mounting hole on the lower left side of the mower deck. Tighten the locking wing nut. You are now ready to use your John Deere tractor as a mulcher.
Thereof, Do mulching blades go up or down?
The curved contour of the blade should be facing up (towards the under side of the deck) and the sharpened outer edge of the blade should be angled towards the ground.
Also to know is, Can you mulch with a zero turn mower? The blade tip speed on most Zero Turn mowers is high enough to take care of most of your mulching for you. Regular blades can mulch just fine as long as you can close off your chute and keep the leaves under the deck.
Subsequently, question is, Can you use mulching blades without a mulching kit? Blades should work…. Gators work even w/o mulch kits. Might chop the pieces up finer and they might not.
Also, Is mulching better than side discharge?
Both side-discharge and mulching mowers leave grass blades behind. However, a mulching blade chops up clippings into finer pieces so they decompose faster and don’t clump as quickly. Using a side-discharge mower you may need to do your own mulching by running over your grass piles multiple times.
Do mulching blades need sharpening?
Yes, lawn mower blades need to be sharpened. … The dull blade stresses the grass and the damaged grass tips turn yellow. A sharp blade will cut cleanly which is healthier for the lawn, easier on you and your mower engine.
Can I use mulching blades with side discharge?
Can you use mulching blades with side discharge? Yes, you can use side discharge with mulching blades. Side discharge will help in preventing any clumps that might occur under the deck due to the grass.
Can you mulch with a riding mower?
Using your riding lawn mower to mulch grass and other debris on the lawn, such as leaves, is an easy way to dispose of them without bagging. … This prevents clumps on your yard and debris stuck inside the mower deck.
Can you put a mulching blade on any mower?
Yes, you can put a mulching blade on almost any mower. To put a mulching blade on a mower, the blade needs to be able to fit the deck properly and be secured tightly. Not all mowers equipped with a mulching blade will do a good mulching job due to bad deck design, or low-powered engine.
Are mulching blades better than regular blades?
Standard blades, sometimes referred to as 2-in-1 blades, are designed to cut grass and then either discharge or bag the clippings. … Mulching blades, also known as 3-in-1 blades, can be used to bag, discharge, or mulch grass clippings. Mulching blades feature more curves and an increased cutting edge.
Which way does a mower blade go on?
How do you know which side of a lawn mower blade is up?
Locate the Cutting Edge on the Blade The most reliable and effective way to tell your mower blade is up is to recognize the cutting edge of the instrument. This edge will be clearly sharpened, especially compared to the duller side. The cutting edge should face the grass, as it will be chopping the grass.
Are mulching blades good for leaves?
Mulching Blades mulch leaves well. If you have a large amount of leaves, the extra teeth on the fins of the blades help to destroy them on every rotation. Saves Time.
Do new mulching blades need to be sharpened?
No, most new mower blades do not need to be sharpened. Although rare, some blades may come with a small coat of paint in which case it may seem beneficial to “sharpen off” the paint. … If the grass blades are nicely cut then don’t waste your time sharpening the mower blades.
Are mulching blades worth it?
Mulching blades are an excellent choice for use on lawns that receive a mowing every three to four days. Using mulching blades on overgrown grass can result in clogging under the deck and piles of grass on the cut lawn. Mulching is also an environmentally friendly way to deal with grass clippings.
How do you align lawn mower blades?
Pull the deck belt from around the engine pulley and slide the cutting deck out from under the mower. Turn the cutting deck over to access the blades. Put on gloves to protect your hands and turn the blades until one is pointing forward and back.
How often do mower blades need to be sharpened?
every 20 to 25 hours
Don’t forget to share this post 💖
References and Further Readings :