Thereof, Are all toilets the same distance from the wall?
Start by measuring from the wall behind the toilet to the center of the bolts at the base of the toilet. … If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
Also to know is, Should a toilet cistern be screwed to the wall? They should be flush and secured with screws. If it is a small gap maybe you can pack it out and screw to wall.
Subsequently, question is, How much space should be between toilet tank and wall? 12 inches
Also, Are all toilets interchangeable?
Most toilets are interchangeable with one another, and can be easily replaced as a DIY project or as part of a bathroom remodeling project or as an independent home improvement project. … Toilets also come in a range of seat heights and there are two basic bowl configurations, standard and elongated.
What do you do with the space behind the toilet?
– Hang towels. …
– Install hooks for baskets. …
– Mount an open shelf. …
– Mount multiple shelves. …
– Mount baskets. …
– Mount a storage unit. …
– Create built-in shelving. …
– Add a storage tower.
Do all toilets have the same footprint?
Most toilets will have a 12 inch rough-in. … If you’re replacing an existing toilet, look for a replacement toilet with the same rough-in. A toilet with a larger rough-in measurement will require you to change your plumbing configuration or move the wall to get the toilet to fit.
Should a toilet tank touch the wall?
No, there is no standard distance a toilet tank should set out from the wall. There are standard rough in distances, the most common is 12″ with a few at 10″ and a few at 14″, but the actually distance the tank will be from the wall will vary. Yours is quite normal.
Are all toilet handles universal?
A broken toilet handle or lever is a fairly common plumbing problem. … There are also universal handles that will fit almost any toilet, no matter what type of toilet tank lever you currently have. With universal toilet handles, there are sometimes adjustments that have to be done to the handle to make them fit.
How much space do you need behind a toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How do you install a toilet flush to the wall?
What class of lever is a toilet handle?
fixed lever
How do you know what size toilet to buy?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. … If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
Can I put cleaner in the toilet tank?
If the toilet tank walls still look dirty, spray an all-purpose cleaner (choose one that is safe for not just the toilet tank but one that is safe to use on plastic and metal) onto the inside walls. Let it sit for the manufacturer’s suggested time, usually 5-10 minutes. Scrub the walls with a scrub brush.
Are toilet sizes universal?
Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. Toilet bowl shapes: Round toilet bowls take up less room than elongated bowls, which are usually up to three inches longer.
Are toilets standard sizes?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″. Now you can find the perfect toilet.
How do you remove a toilet flush cover?
Don’t forget to share this post 💖
References and Further Readings :