SAE to Metric Calculator The formula for that conversion is 1 mm = 1⁄25.4 inches, which is approximately 0.039″.
SAE Metric Inch
—— —— —–
20mm 0.787
13/16″ 0.813
21mm 0.827
27/32″ 0.844
Thereof, What SAE and metric sizes are the same?
While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.
Also to know is, What is a 21 mm in standard? MM Approximate Size In Inches Exact Size In Inches
—- ————————– ——————–
21mm Little over 13/16 Inch 0.82677 Inches
22mm Just short of 7/8 Inch 0.86614 Inches
23mm Little over 7/8 Inch 0.90551 Inches
24mm 15/16 Inch 0.94488 Inches
Subsequently, question is, What are the metric conversions? The basic metric units are meters (for length), grams (for mass or weight), and liters (for volume). And the different units convert into one another rather nicely, with one milliliter equalling one cubic centimeter (the “cc” of medical shows on television) and one gram being the weight of one cc of water.
Also, What are the conversions for the metric system?
Metric US or Imperial
—————– ————–
1 millimeter [mm]
1 centimeter [cm] 10 mm
1 meter [m] 100 cm
1 kilometer [km] 1000 m
What is 27mm in standard?
Inches Millimeters Spanner
—— ———– ———————-
1.063 27mm 1 1/16 AF; 27mm
1.100 5/16 Wworth; 11/16 BSF
1.125 1 1/8 AF
1.181 30mm 30mm
How many mm is a 3/4 socket?
Standard SAE US Wrench/Spanner Size (inches) Metric Wrench/Spanner Size (mm)
——————————————– ——————————-
3/4 19.05
25/32 19.84
20
13/16 20.64
How many mm is 21 gauge?
B&S Gauge Millimeter (mm) Inch (decimal)
——— ————— ————–
20 0.812 0.032
— 0.795 0.031
21 0.723 0.028
22 0.644 0.025
What is metric to English conversion?
Multiply This known value
————————-
Foot (‘)
Weight
Gram (g)
Kilogram (kg)
What are the SAE socket sizes?
Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Six Point Metric Sockets (9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21)
How do I convert US customary to metric?
How many MM is a 14 gauge piercing?
1.6 millimeters
What is the metric conversion to inches?
Millimeters (mm) Inches (“) (decimal) Inches (“) (fraction)
—————- ——————– ———————
1 mm 0.0394 ″ 3/64 ″
2 mm 0.0787 ″ 5/64 ″
3 mm 0.1181 ″ 1/8 ″
4 mm 0.1575 ″ 5/32 ″
Which wrench is bigger 3 4 or 19mm?
19mm but 3/4 is only 0.002 inch bigger so it doesn’t matter. Stock is 19 mm.
Which is bigger 6mm or 1/4 inch?
1mm = just over 1/32 inch. 2mm = just over 1/16 inch. … 5mm = just over 3/16 inch. 6mm = almost 1/4 inch.
Do you need both SAE and metric?
If you’re going to be working on both types of cars, foreign and domestic, you will need both SAE sockets and metric sockets. However, the general trend is moving away from SAE fasteners and more companies are going 100% metric. … They are moving towards using mostly metric sizes as well.
What is 21mm in standard?
Bolt Diameter Standard Metric
————- ——– ——
3/8″ 9/16″ 14mm
7/16″ 5/8″ 16mm
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm
Don’t forget to share this post 
References and Further Readings :
