– Painted Rafters. 1/11. …
– Natural Wooden Planks. 2/11. …
– Painted Wooden Planks. 3/11. …
– Painted Pipes and Beams. 4/11. …
– Tin Ceiling. 5/11. …
– Corrugated Metal Ceiling. 6/11. …
– Decorative Ceiling Tile. 7/11. …
– Contrasting Paint Colors. 8/11.
Thereof, How do you seal a basement ceiling?
Also to know is, What is the cheapest basement ceiling? Drywall. Perhaps the cheapest and most widespread ceiling solutions, drywall creates a smooth, attractive living space. Simply apply a coat of primer and a coat of your favorite paint color for a nice finished look. Paired with recessed lights, the surface gives the ultimate modern or futuristic appeal.
Subsequently, question is, Is it cheaper to drywall or drop ceiling? Cost of a Drop Ceiling The savings are slim to none. If you’re hiring a drywall crew to do the walls anyway (which I highly recommend) then it’s not a much more to have them do the ceiling as well. In newer houses especially, a drywall ceiling is about the same or cheaper compared to a suspended ceiling.
Also, What can I use for basement ceiling?
If you don’t have obstructions hanging below your joists, you easily can finish your basement ceiling using drywall or paneling, such as 4-by-8-foot sheets of decorative grooved wall paneling. Sheet paneling is easy to install, but you’ll have to figure out what to do with the seams at the ends of the panels.
How do I seal an air leak in my basement?
These areas provide greater opportunities for air leakage and heat loss. Caulk is best for sealing gaps or cracks that are 1/4 inch or less. Use spray foam to fill gaps from 1/4 inch to about 3 inches. We also recommend you seal penetrations that go through the basement ceiling to the floor above.
How much does it cost to air seal your home?
Air leaks can also cause moisture to seep into the walls and ceiling, causing structural damage to the house as well as affecting the health of the occupants. The average air sealing project in the U.S., which covers air sealing the doors and windows of a two-story, 2,500 sq. ft. home will cost around $350 -$600.
How much does it cost to put in a drop ceiling?
Drop ceilings cost $994 and $2,547, or $1,765 on average, depending on the room size and material quality. Labor is $2 to $5 per square foot, while ceiling tiles and grid rails are $3 to $23 per square foot total. Rail covers, insulating tiles and lighting add more to the price.
Can you put drywall directly on basement ceiling joists?
Yes you can, but it is not always easy to do. The joists may not be perfectly spaced and you only have a 1-1/2 inch target for attaching two edges of the drywall. That is why so many people put 1×3 or even 1×4 strapping on the ceiling. …
How do I seal an air leak in my house?
– Test your home for air tightness.
– Caulk and weatherstrip doors and windows that leak air.
– Caulk and seal air leaks where plumbing, ducting, or electrical wiring comes through walls, floors, ceilings, and soffits over cabinets.
– Install foam gaskets behind outlet and switch plates on walls.
How do you air seal a house?
– Test your home for air tightness.
– Caulk and weatherstrip doors and windows that leak air.
– Caulk and seal air leaks where plumbing, ducting, or electrical wiring comes through walls, floors, ceilings, and soffits over cabinets.
– Install foam gaskets behind outlet and switch plates on walls.
How much does it cost to replace basement ceiling?
Average Cost to Put a Drop Ceiling in a Basement Putting a drop ceiling in a 400-square-foot basement could run you $2,000 to $11,200. You need $1,200 to $9,200 in materials for that larger space. Labor also increases with the square footage and lands in the $800 to $2,000 range.
What is the cheapest way to cover a basement ceiling?
– HD Wallpaper.
– Sheet Paneling.
– Tin Tiles.
– Styrofoam or Particle Board.
– Wood Planks.
– Drop Ceilings.
– Drywall.
What material can be used for ceilings?
– Wood. Wooden ceiling boards usually look classic and natural. …
– Gypsum. Gypsum ceiling boards come in many different patterns. …
– Vinyl. Vinyl ceiling boards are light, resistant to water and moisture. …
– Fibre-cement. Fibre-cement ceiling boards are durable against weather conditions and resistant to fire.
How can I make my unfinished basement ceiling look better?
– Painted Rafters. 1/11. …
– Natural Wooden Planks. 2/11. …
– Painted Wooden Planks. 3/11. …
– Painted Pipes and Beams. 4/11. …
– Tin Ceiling. 5/11. …
– Corrugated Metal Ceiling. 6/11. …
– Decorative Ceiling Tile. 7/11. …
– Contrasting Paint Colors. 8/11.
How easy is it to install a drop ceiling?
How much does it cost to install a drop ceiling?
Installing a drop ceiling costs $5 to $28 per square foot for labor and materials. Add $2 per square foot if you want insulating panels that go behind the ceiling tiles and up to $1 per linear foot for decorative rail covers. Labor typically costs up to $5 per square foot when hiring a ceiling tile installer near you.
Don’t forget to share this post 💖
References and Further Readings :
