Cutting Wonderboard Use a circular saw with a cement board blade. Support the entire board before and during cutting to avoid breakage. The scoring knife can be used instead of a saw for a cut that goes across the whole board. Use a straight edge and press hard as you draw the knife along the cut line.
WonderBoard® Lite Backerboard. A 20% lighter fiberglass mesh-reinforced cement backerboard for residential and commercial tile, stone, slate and thin-brick applications. High-flexural strength, along with moisture resistance, makes WonderBoard® Lite ideal for both interior and exterior substrate applications.
Thereof, Is Hardie board the same as cement board?
Hardie Board is the best known brand of cement board siding, which is often called fiber cement. … Home owners prefer cement board siding because it so closely resembles other building materials.
Also to know is, What do you cut cement board with? The simplest way to cut cement backer board is to score the surface and snap the sheet along the scored line, similar to the way you’d cut drywall. In fact, you can use a drywall utility knife to score backer board, but a better option is a carbide-tipped scoring tool.
Subsequently, question is, Is HardieBacker a cement board? HardieBacker® cement board is a tile underlayment made to use on walls, with floors and countertops. … 42″ cement board is made of 90% Portland cement and sand, resists damage from moisture and provides excellent tile adhesion.
Also, What kind of saw blade do you need to cut Hardie board?
To cut this type of siding, use a masonry blade. Masonry blade types include abrasive materials or vented diamond blades that are used for dry cutting. The blades are designed to be used with most cutting tools, including circular, table and miter saws.
How do you cut cement board already installed?
Get a 7″ diamond blade and put it in your circular saw. Set the depth 1/8 less than you need it to be and make your cut. It will make an EXTREME amount of dust, and it would be helpful to have someone right there holding a vaccuum cleaner hose to try to suck up the dust coming off the blade while you cut.
How do you cut cement board without dust?
And although I’ve never tried it myself, you can cut backer board using a wet saw, which is designed for cutting tile. The saw has an abrasive blade that’s bathed in water, so it cuts cleanly, with no dust. Another power-tool option is to use a jigsaw fitted with a metal-cutting blade or carbide-grit blade.
Is Hardibacker better than durock?
On the contrary, the glass mesh provides more support than just reinforced fiber does. HardieBacker cement boards are light in weight and easy to install. When it comes to durability, Durock cement boards are more durable if less force exerts on it. The glass mesh can break at a certain level of power.
What do you cut Hardie plank with?
– When cutting fiber-cement siding with circular saw, use a blade that has only four or six teeth.
– To keep dust to a minimum, use a circular saw that’s equipped with either a dust-collection bag or electric fan that blows dust into a bucket.
– For a slow, but virtually dustless way to cut siding, use power shears.
Is WonderBoard the same as cement board?
Hardibacker is the best known fiber cement board. Cement board has improved over the years and is easier to work with.
Can you use backer board on concrete?
Cement backer board on concrete as a subfloor or underlayment is usually not recommended or needed. In most cases, you can apply tile directly to the concrete. … One solution is to nail cement backer board CBUs over the drywall, tape the seams, and then grout over the cement backer board.
What does cement board do?
The primary purpose of cement boards is to serve as backing for tile and is superior to paper-covered gypsum at this task because of its resistance to water – as tile is typically used in areas prone to water exposure, it is important to have a backing that will not develop mold and mildew or disintegrate after …
Which is better cement board or Hardibacker?
Durock cement boards contain glass mesh along with reinforced fibers, while HardieBacker only has reinforced fibers, which make Durock cement boards more cumbersome. … On the contrary, the glass mesh provides more support than just reinforced fiber does. HardieBacker cement boards are light in weight and easy to install.
Which is better Hardie board or durock?
Durock is a reliable cement product that contains glass mesh. It is the heavier of the two materials, which means it is more difficult to use and maneuver. … HardieBacker is much more light, and it is also the best selling brand of cement board available. It is much cleaner because it does not have any glass in it.
What side of cement board do you cut?
Cement board has a smooth side and a rough side. Face the rough side out if you will be using thin-set mortar adhesive to install the tile but the smooth side out if you will be using latex mastic.
How do you cut a durock sheet?
To cut DUROCK Brand Cement Board, mark desired size on the board with a rule and pencil. Score both sides and edges with a utility knife through the glass-fiber mesh, and snap the board to size. Smooth cut edges with wood rasp. Cutting with a circular saw with a car- bide-tipped blade is an alterna- tive.
Do you need a special blade to cut Hardie board?
To cut this type of siding, use a masonry blade. … The blades are designed to be used with most cutting tools, including circular, table and miter saws. Reciprocating and jigsaws, which can be equipped with carbide-encrusted blades, are convenient to use when making small or circular cuts in Hardie board siding.
Don’t forget to share this post 💖
References and Further Readings :
