If the sprayer is still leaking: Remove the sprayer head from the coupling again and gently pry out the washers at the top of the coupling with a screwdriver. Replace the old washers, installing the thin washer before the thick one and press them both firmly into place. Screw the sprayer head back onto the coupler.
Thereof, How do you remove a Moen quick connect sprayer hose?
To disconnect a Duralock fitting, grasp the hoses on both sides of the fitting and push them together while you depress the black button on the fitting. When the button is fully depressed, it unlocks the connection so you can pull the hoses apart.
Also to know is, How do I remove a delta side sprayer? – Turn the faucet on.
– Take the spray head in your hand and see where the leak is.
– Push the button and check for leakage again.
– Turn the faucet off.
– Now unscrew the slide nut using a screwdriver and remove the spray head.
– Turn the faucet back on and check for leakage.
Subsequently, question is, How do you remove a faucet sprayer hose?
Also, How do you remove a kitchen sprayer hose?
How do you remove a Delta quick connect hose?
How do I disconnect the Quick Connect once it has been attached? Pinch together at the base of the black plastic halves, next to the hose. The top halves will spread apart. Pull down gently.
How do you remove a faucet sprayer?
How do you fix a leaky kitchen faucet sprayer?
Leaking spray head Start by turning off the water valves beneath the sink. Next, unscrew the spray head, remove the washer and remove the C-clip. To attach the new spray head, simply reattach the C-clip, attach the washer and then screw the spray head onto the hose connection.
Why is my sink sprayer leaking?
A bad sprayer head can cause this, but more often the diverter is the culprit. To check this, remove the sink sprayer head and turn on the faucet. If the water flow out of the hose is weak, the diverter is to blame.
How do you fix a spray head on a faucet?
How do you remove a Moen quick connect hose?
Find the two white plastic tabs at the end of the Quick Connect fitting. Squeeze these tabs together with your fingers or pliers. As you squeeze these tabs they will become pushed into the black plastic housing. This will cause the white button on the opposite side of to pop out a little.
How do you remove a quick connect faucet hose?
For metal hoses with a quick connect: push up on the assembly towards the faucet as if you are installing it. Simultaneously pull the gray ring at the top of the brass tube down towards the floor – this relieves pressure on the collet holding the connector in place and allows you to remove it.
How do I remove the hose from my kitchen sink sprayer?
How do you remove a Delta faucet hose?
How do you remove a Delta kitchen faucet sprayer hose?
Unscrew the old sprayer hose from the faucet stem using a basin wrench. Pull it out from the deck fitting. Unscrew the deck fitting nut from under the sink with the help of a screwdriver and pull out the fitting from the other end.
How do you remove a kitchen sink sprayer hose?
How do you fix a faucet sprayer?
Don’t forget to share this post 
References and Further Readings :
