Connect each of the two switched hot wires (typically one black, one red) to the switched hot screw on a switch. Use a wire nut to connect the panel white neutral to the neutral wire going to the fan/light. In the fan/light junction box, connect each switched hot to one of the hot wires on the fan/light.
Bathroom exhaust fans with built-in light fixtures are fairly common. If you have one of these, you may have wired the fan and light to separate switches. Now, you’d like to operate both of them from the same switch. The wires are already where you need them to be, so you don’t have to run new ones.
Thereof, How do you wire a fan light switch?
Line voltage enters the switch outlet box and the line wire connects to each switch. Switched lines and neutral connect to a 3-wire cable that travels to the light/fan outlet box in the ceiling. The fan control switch usually connects to the black wire and the light kit switch to the red wire of the 3-way cable.
Also to know is, How do you wire a fan light combo? – Connect the green/copper wires together.
– Connect white wires together.
– Connect black wires together.
– Connect the lighting wire, typically blue, to the black fan wire and the black ceiling wire.
– Tuck the wires back into the box.
– Turn the power back on and test the fan.
Subsequently, question is, Can you use a light switch for a fan? Most new ceiling fans can be wired to either a single switch or a double switch. With single-switch wiring, power to the fan is controlled by a standard single-pole wall switch, like a regular light switch.
Also, Does bathroom exhaust fan need dedicated circuit?
Bathroom Circuits If the vent fan has a built-in heater, it must have its own 20-amp circuit. This is called a “dedicated” circuit because it serves only one appliance or fixture. Heat lamps, wall heaters, and other built-in heating appliances may also require dedicated circuits.
How do you wire a bathroom fan and light together?
Connect the fan and light to the cable. If there is only one hot wire, twist it together with the black cable from the switch with pliers. If there are two hot wires, and you want the switch and light to be operated by the same switch, twist both of them together with the black wire.
How do you put a light and fan on a separate switch?
Connect each of the two switched hot wires (typically one black, one red) to the switched hot screw on a switch. Use a wire nut to connect the panel white neutral to the neutral wire going to the fan/light. In the fan/light junction box, connect each switched hot to one of the hot wires on the fan/light.
How do you wire a bathroom fan to an existing light switch?
Remember, you also need to wire an extra switch to turn the fan on unless you want it to come on with the light all the time. You will need to run 3-wire cable between your new exhaust fan and the existing switch. Then you will need to remove the old switch and replace it with a double switch at that electrical box.
How do you wire an extractor fan to a light?
How many amps does a bathroom exhaust fan use?
Most bathroom ventilation fans use a 15-amp circuit breaker and 14-gauge wiring. Due to the increased power drawn, fans with heaters usually require a 20-amp circuit breaker and 12-gauge wiring.
How do I wire a fan to an existing switch?
Line voltage enters the switch outlet box and the line wire connects to each switch. Switched lines and neutral connect to a 3-wire cable that travels to the light/fan outlet box in the ceiling. The fan control switch usually connects to the black wire and the light kit switch to the red wire of the 3-way cable.
How do I wire a fan with two switches?
How do you wire a ceiling fan switch?
– Connect the green/copper wires together.
– Connect white wires together.
– Connect black wires together.
– Connect the lighting wire, typically blue, to the black fan wire and the black ceiling wire.
– Tuck the wires back into the box.
– Turn the power back on and test the fan.
How do you run electricity from an existing light switch?
How do you wire a fan switch?
Line voltage enters the switch outlet box and the line wire connects to each switch. Switched lines and neutral connect to a 3-wire cable that travels to the light/fan outlet box in the ceiling. The fan control switch usually connects to the black wire and the light kit switch to the red wire of the 3-way cable.
Why do two switches connect to the paddle fan?
Wiring a ceiling fan with two switches is not any harder than wiring one with three switches or just one switch. The purpose of having the two switches is that one controls the lights on the ceiling fan, while the other controls the speed.
Does a bathroom fan need to be on its own circuit?
Bathroom Circuits If the vent fan has a built-in heater, it must have its own 20-amp circuit. This is called a “dedicated” circuit because it serves only one appliance or fixture. Heat lamps, wall heaters, and other built-in heating appliances may also require dedicated circuits.
Don’t forget to share this post 
References and Further Readings :