– Flathead Screwdriver. If you can’t find one screwdriver, you can always give it a go with another. …
– Metal Vegetable Peeler. Whenever you find yourself without a Phillips screwdriver, you may want to look in your kitchen drawers. …
– Butter Knife. A butter knife can be found in anyone’s kitchen. …
– Loose Coins. …
– Washers. …
– Pliers.
– The tip of a knife. Insert the tip of a pointed knife into the head of the screw. …
– Metal nail file. …
– Small scissors. …
– Tweezers.
Thereof, How do you make a mini screwdriver?
Also to know is, What can I use if I don’t have a glasses screwdriver? – Flathead screwdriver. If the only screwdriver you own is flat-headed, you can use this to remove Phillips head screws. …
– Coin. …
– Butter knife. …
– Hacksaw. …
– Toothbrush. …
– Old CD. …
– Pliers. …
– Thumbnail.
Subsequently, question is, What size screwdriver do I need for glasses? Straight head 1mm to 2mm across and a small cross head screwdriver about 1.5mm to 2mm across. Some spectacles have three screws per side. One holding the side on, one holding the lens in and one on the nose pads. Often all three are different sizes some are straight head and some cross head.
Also, How do you unscrew Iphone screws without a screwdriver?
– Step 1: What You Need. Here is the stuff you need: …
– Step 2: Bend Your Rod. Cut off a small section of your thin metal rod and bend it as shown. …
– Step 3: File the Rod. File the two edges of your metal rod until the end becomes a rectangular bar. …
– Step 4: File Some More. Now file down the modified metal rod. …
– Step 5: Use It!
What can I use instead of a tiny screwdriver?
For Single-Slot Screws If you’re dealing with a single-slot screw, head to your kitchen or wallet for an alternative to a screwdriver. The first thing you could try is a kitchen knife. Choose one that has a rounded tip like a butter knife or a small knife that you would use for a cheese board.
How do you open a sharpener without a screwdriver?
– A kitchen knife. Choose one with a rounded tip, such as a butter knife. …
– A coin — preferably a dime, which is thin enough to fit in most screw slots. …
– A credit card. …
– A rubber band. …
– A chisel, which does an even better job of turning single-slot screws than a flat-head screwdriver.
What do you do if your screwdriver is too small?
A better way to do this is to take a small hammer and tap the screwdriver from the back a few times. You have to do it solidly for it to work. Used to work on cars with stripped/rusted screws. Short of heating them up, hitting the driver would usually give you a better grip.
How do you tighten glasses with a screwdriver?
You’ll need an optometric screwdriver that either has a flat tip or Phillips tip, depending on the screw type used in your glasses. To tighten, turn the screwdriver clockwise. This will move the frames inwards and closer to the contours of your head. For even more tension, you can also tighten the eye wire.
What is the smallest size screwdriver?
Use this precision Phillips #000 screwdriver to handle smallest fasteners in consumer electronics, laptops, tables, smartphones, and wearables. The Phillips #000 screw is the smallest fastener in the Phillips family and is used in the most compact electronic applications.
Are eyeglass screws Universal?
There is no universal screw for your watch or eyeglasses. The good news is that this Eyeglass and Watch Screw Repair Kit contains many various tiny screws that will most likely contain the one you need to repair your watch or glasses.
How do you unscrew a small Torx screw?
Use a small flat head screwdriver. Insert the flat head screwdriver between two opposite edges of the screw head. Turn counterclockwise to remove the screw. Make sure you turn slowly so as not to damage the head.
How do you unscrew a Torx screw?
– For security torx screws you will need to insert the flat head in against one of the outer grooves and the center nub of the head. …
– Security torx screws will usually turn the opposite direction, so you should turn clockwise to remove them.
How do you remove a tiny Torx screw without a screwdriver?
Drill a small hole in the tip of your torx driver. If you have a security torx screw and wish to remove using a non-security torx driver or drill bit then you can drill a small hole in the drill bit. This way it has a small hole to accommodate the center pin on your security torx screw.
What size are screwdriver bits?
They come in three main sizes – 1/4”, 5/16”, and 3/8”. Sometimes these sizes will be slightly small for the screw at hand.
What can I use instead of a Torx screwdriver?
– Torx screws have a star-shaped pattern on the head and are very popular screws for all purposes. …
– Use a small flat head screwdriver. …
– Break out the pin on security torx screws. …
– Drill a small hole in the tip of your torx driver. …
– Try a plastic toothbrush.
How do you remove small electronic screws?
Don’t forget to share this post 
References and Further Readings :
