To light the pilot you hold down on valve for a minute while holding a flame from a long lighter at the pilot orifice. You hold down on the valve for this minute while it is lit and then let go. The flame should stay lit. If the flame should go out then you have a bad thermocouple.
Thereof, How do you relight a furnace pilot light?
– Find the pilot light assembly and its reset switch. The furnace’s pilot light is usually positioned at the bottom of the unit by a knob. …
– Set the reset switch to off. Turn the knob to the “Off” setting. …
– Wait a moment. …
– Relight the pilot light. …
– Observe the furnace.
Also to know is, How do I get my pilot light back on? Once the gas has had time to dissipate, turn the knob to “Pilot.” Then, hold down the “Reset” button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
Subsequently, question is, How can I tell if my pilot light is on? The pilot gas line is a small metal tube below the burner assembly and distinctive by the slight upturn at the end. It will be apparent, if the pilot is lit, by the small blue flame burning at the end. If you do not see a small blue flame burning, the pilot light is out.
Also, Is it safe to relight a pilot light?
But first, some words of caution: –Don’t relight the pilot light if there is a strong gas odor. Close the main gas shut-off valve for your house or for the appliance with the leak and call the gas company immediately. Get everyone out of the house until the problem is corrected by gas company technicians.Sep 20, 1992
How do I turn my pilot light back on?
Press and hold the reset button. If the reset button fails, ignite the lighter. Hold down the reset button and bring a grill lighter or long match to the pilot light valve until the pilot ignites. Once the pilot light stays lit, turn the valve to the “on” position.
Can you hear a pilot light?
As long as it is burning, the main gas is allowed to flow when you turn it on. If it isn’t burning, then it won’t. … If it’s off, turn it to pilot and hold it down (this causes gas to flow). When holding it down, you should be able to hear gas flow (it’ll be very faint noise).
Is it dangerous if your pilot light goes out?
Can a Pilot Light Outage Be Dangerous? The worry here is that when a pilot goes out, the gas valve that supplies the fuel for the pilot flame could still be pumping gas. This can mean a buildup of gas, and when the pilot is relit or relights itself it could result in a very serious explosion.
What do I do if my pilot light won’t light?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
How do you light the pilot on a cozy wall heater?
How do you light a pilot light on a gas furnace?
Once the gas has had time to dissipate, turn the knob to “Pilot.” Then, hold down the “Reset” button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
Is it bad if the pilot light goes out?
This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out. … If the pilot light goes out for any reason, the current stops, the valve closes, thus preventing any gas from leaking.
How do I turn on my electric pilot light?
Once the gas has had time to dissipate, turn the knob to “Pilot.” Then, hold down the “Reset” button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
How do you know if the pilot light is on?
The pilot gas line is a small metal tube below the burner assembly and distinctive by the slight upturn at the end. It will be apparent, if the pilot is lit, by the small blue flame burning at the end. If you do not see a small blue flame burning, the pilot light is out.
Does pilot light make noise?
If there is a roaring sound that occurs when the pilot light is on, it is usually because the flame needs to be adjusted. A grinding or shrieking noise is usually caused by a fan or blower. Not all gas fireplaces have this feature.
Can a pilot light relight itself?
Since automatic pilot lights cannot be lit by hand, the procedure for lighting them is entirely different. In fact, it is really not a matter of “relighting” the pilot, but rather of resetting the pilot light. To do this, you must shut off the gas supply, effectively resetting the system and resetting the pilot.
How do I reset my electronic ignition furnace?
– Check the power: The power switch to your furnace should look like a light switch. Make sure it’s in the on position.
– Turn off the furnace: Turn off your furnace’s power and gas supplies. Wait several minutes for the gas to clear.
– Find the ignition button: Turn your furnace back on.
Don’t forget to share this post 
References and Further Readings :
