With the door open, press “#” key to start the keypad, then press “0” key twice and reset button once, the buzzer beeps twice and the LCD display will turn blue and show “——”. Input your new user code(3-8 digits), and press the “#” key.
The safe can be programmed with two personal codes. After opening the safe, you should program two codes of your own to take the place of the two factory-preset codes, which are 1-2-3-4-5-6 and 5-6-7-8-9-0. Do not close the safe until a new code has been entered. Try the new code before locking the safe.
Thereof, How do I change my safe code?
– With the safe door OPEN and the bolts on the side of the safe all the way out, press the 0 button six times.
– Enter the old combination.
– Enter the new 6 digit combination.
– Enter the new combination again.
– Test the new combination and work the bolts in and out 3 or more times BEFORE closing and locking the door.
Also to know is, How much does it cost to change a safe combination? Opening Method Used Average Cost Range
————————- ——————
Fire Safe by Drilling $200 – $250
In-Floor Safe by Drilling $325 – $475
Subsequently, question is, How do you open a safe if you forgot the combination? If they can’t help you, your local locksmith can. If the safe is a dial, and you were able to find the serial number, the locksmith will most likely will be able to retrieve the original combination to the safe. So long as the safe combination has never been changed, this will open the safe.
Also, Can a safe combination be changed?
It is possible to change the combination on your safe lock. However, depending on whether you have a mechanical or electronic lock will determine the route you’ll need to take to get the job done.
How do you manipulate a safe combination lock?
– Turn the dial Left at least four complete revolutions and stop at “0”. .
– Continue turning the dial Left and stop at 2 1/2.
– Turn the dial right to the contact point and record the reading on your chart. …
– Add 2 1/2 to the number in Step 2 and turn the dial left to that number.
How much does it cost to drill a safe?
If the original combination has been changed, they may need to drill a small hole on the side of the tumbler, which can be easily soldered. The fees for these services range from $30-$50 for a standard re-key or replacement combination to $50 -$100 to have the safe drilled and the tumbler combination changed.
How do you open a locked safe?
Put the key in and turn it to the left to open a key-lock safe. Line up the key with the lock correctly and insert it. Turn it counterclockwise and pull the door towards you to open the safe. If you lose your keys, contact the manufacturer to see if replacement keys are available.
Can a locksmith open a combination safe?
Safe Combination or Lost Keys Similar to being locked out of your car or your home because you lost or misplaced the keys, being locked out of your safe because you forgot the combination poses a problem. Luckily, locksmiths for safes have been trained to help when there is a safe lockout.
How much does it cost to open a locked safe?
Hourly rate $50 – $100
——————————– ———–
Open safe $50 – $400
Electronic security installation $100 – $400
How do you change a combination on a safe lock?
– Identify the marks for opening and changing the lock. …
– Open the safe door and throw the lock bolts into the extended position. …
– Turn the combination knob counterclockwise until the first number has passed the change mark three times. …
– Rotate the knob clockwise until the second number has passed the change mark twice.
Can locksmith open gun safe?
By listening for specific sounds and feeling the vibrations that a dial makes as it’s turned, a locksmith can find the right combination to unlock the safe. This is the best way to resolve the problem as it doesn’t harm the integrity of the safe and can usually be completed in less than an hour.
How do you open a safe when you forgot the combination?
If they can’t help you, your local locksmith can. If the safe is a dial, and you were able to find the serial number, the locksmith will most likely will be able to retrieve the original combination to the safe. So long as the safe combination has never been changed, this will open the safe.
Can locksmiths open gun safes?
It may seem impossible to open a locked safe, but locksmiths have a few tools of the trade they can use assess the problem, free the lock and repair it or, at the very least, allow the owner to access and retrieve the contents.
How do you reset the code if you forgot the safe?
The simplest solution is to reset the code. Depending on the manufacturer and type of safe, you may be able to enter an override code, or your locksmith may be able to access a reset switch inside the safe with a special tool. If there is no way to override the code, you may be able to “bounce” the safe.
How do you open a Chubb safe if you forgot the combination?
If they can’t help you, your local locksmith can. If the safe is a dial, and you were able to find the serial number, the locksmith will most likely will be able to retrieve the original combination to the safe. So long as the safe combination has never been changed, this will open the safe.
How much would a locksmith charge to open a safe?
Locksmith Charge to Open Safe Changing the key combination: $50-$60. Lock Combination Change: $40-$75. Switch a Mechanical lock to electronic: $100-$150.
Don’t forget to share this post 
References and Further Readings :